On Thu, Jan 24, 2019 at 11:33 PM Ricardo Ribalda Delgado <ricardo@xxxxxxxxxxx> wrote: > > Add support for ADS7866, ADS7867 and ADS7868 8/10/12 bit Single channel > ADC. > > Datasheet: http://www.ti.com/product/ADS7866 > Datasheet: http://www.ti.com/product/ADS7867 > Datasheet: http://www.ti.com/product/ADS7868 > > Signed-off-by: Ricardo Ribalda Delgado <ricardo@xxxxxxxxxxx> > --- > drivers/iio/adc/Kconfig | 3 ++- > drivers/iio/adc/ad7476.c | 20 ++++++++++++++++++++ > 2 files changed, 22 insertions(+), 1 deletion(-) > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > index f9354e5ee65c..d86900fc2634 100644 > --- a/drivers/iio/adc/Kconfig > +++ b/drivers/iio/adc/Kconfig > @@ -64,7 +64,8 @@ config AD7476 > help > Say yes here to build support for Analog Devices AD7273, AD7274, AD7276, > AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, > - AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC). > + AD7495, AD7910, AD7920, AD7920, ADS7866, ADS7867, ADS7868 SPI analog > + to digital converters (ADC). The driver is for Analog Devices parts. And these new parts are from TI. I'm not sure what the policy is for mixing manufacturers in drivers. But if that is allowed/fine, then maybe it would be a good idea to highlight that these chips are from another manufacturer. Or maybe rename the driver to a generic form to support both manufacturers ? In any case, Jonathan will have to tell us what to do here :) Thanks Alex > > To compile this driver as a module, choose M here: the > module will be called ad7476. > diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c > index 0549686b9ef8..108c18d64f7d 100644 > --- a/drivers/iio/adc/ad7476.c > +++ b/drivers/iio/adc/ad7476.c > @@ -59,6 +59,9 @@ enum ad7476_supported_device_ids { > ID_ADC081S, > ID_ADC101S, > ID_ADC121S, > + ID_ADS7866, > + ID_ADS7867, > + ID_ADS7868, > }; > > static irqreturn_t ad7476_trigger_handler(int irq, void *p) > @@ -157,6 +160,8 @@ static int ad7476_read_raw(struct iio_dev *indio_dev, > #define AD7940_CHAN(bits) _AD7476_CHAN((bits), 15 - (bits), \ > BIT(IIO_CHAN_INFO_RAW)) > #define AD7091R_CHAN(bits) _AD7476_CHAN((bits), 16 - (bits), 0) > +#define ADS786X_CHAN(bits) _AD7476_CHAN((bits) + 4, 0, \ > + BIT(IIO_CHAN_INFO_RAW)) > > static const struct ad7476_chip_info ad7476_chip_info_tbl[] = { > [ID_AD7091R] = { > @@ -209,6 +214,18 @@ static const struct ad7476_chip_info ad7476_chip_info_tbl[] = { > .channel[0] = ADC081S_CHAN(12), > .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), > }, > + [ID_ADS7866] = { > + .channel[0] = ADS786X_CHAN(8), > + .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), > + }, > + [ID_ADS7867] = { > + .channel[0] = ADS786X_CHAN(10), > + .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), > + }, > + [ID_ADS7868] = { > + .channel[0] = ADS786X_CHAN(12), > + .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), > + }, > }; > > static const struct iio_info ad7476_info = { > @@ -314,6 +331,9 @@ static const struct spi_device_id ad7476_id[] = { > {"adc081s", ID_ADC081S}, > {"adc101s", ID_ADC101S}, > {"adc121s", ID_ADC121S}, > + {"ads7866", ID_ADS7866}, > + {"ads7867", ID_ADS7867}, > + {"ads7868", ID_ADS7868}, > {} > }; > MODULE_DEVICE_TABLE(spi, ad7476_id); > -- > 2.20.1 >
