Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Janusz,

On 2018-09-20 18:21, Janusz Krzysztofik wrote:
> On Thursday, September 20, 2018 5:48:22 PM CEST Janusz Krzysztofik wrote:
>> On Thursday, September 20, 2018 12:11:48 PM CEST Marek Szyprowski wrote:
>>> On 2018-09-02 14:01, Janusz Krzysztofik wrote:
>>>> Certain GPIO descriptor arrays returned by gpio_get_array() may contain
>>>> information on direct mapping of array members to pins of a single GPIO
>>>> chip in hardware order.  In such cases, bitmaps of values can be passed
>>>> directly from/to the chip's .get/set_multiple() callbacks without
>>>> wasting time on iterations.
>>>>
>>>> Add respective code to gpiod_get/set_array_bitmap_complex() functions.
>>>> Pins not applicable for fast path are processed as before, skipping
>>>> over the 'fast' ones.
>>>>
>>>> Cc: Jonathan Corbet <corbet@xxxxxxx>
>>>> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
>>> I've just noticed that this patch landed in today's linux-next. Sadly it
>>> breaks booting of Exynos5250-based Samsung Snow Chromebook (ARM 32bit,
>>> device-tree source arch/arm/boot/dts/exynos5250-snow.dts).
>>>
>>> Booting hangs after detecting MMC cards. Reverting this patch fixes the
>>> boot. I will try later to add some debugs and investigate it further what
>>> really happens when booting hangs.
>> Hi Marek,
>>
>> Thanks for reporting. Could you please try the following fix?
> Hi again,
>
> I realized the patch was not correct, j, not i, should be updated in second
> hunk. Please try the following one.
>
> Thanks,
> Janusz
>
> >From a919c504850f6cb40e8e81267a3a37537f7c4fd4 Mon Sep 17 00:00:00 2001
> From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
> Date: Thu, 20 Sep 2018 17:37:21 +0200
> Subject: [PATCH] gpiolib: Fix bitmap index not updated
> While skipping fast path bits, bitmap index is not updated with next
> found zero bit position. Fix it.
>
> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>

This one also doesn't help. A quick compare of logs with this version and
a working system shows, that with your patch (and fix) there are no calls to
gpx0-2 pin (which are a part of mmc pwrseq), what causes mmc failure. If
you need any more information (what kind of logs will help?), let me know.

> ---
>   drivers/gpio/gpiolib.c | 7 ++++---
>   1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index a53d17745d21..369bdd358fcc 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -2880,7 +2880,7 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
>   			__set_bit(hwgpio, mask);
>   
>   			if (array_info)
> -				find_next_zero_bit(array_info->get_mask,
> +				i = find_next_zero_bit(array_info->get_mask,
>   						   array_size, i);
>   			else
>   				i++;
> @@ -2905,7 +2905,8 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
>   			trace_gpio_value(desc_to_gpio(desc), 1, value);
>   
>   			if (array_info)
> -				find_next_zero_bit(array_info->get_mask, i, j);
> +				j = find_next_zero_bit(array_info->get_mask, i,
> +						       j);
>   			else
>   				j++;
>   		}
> @@ -3192,7 +3193,7 @@ int gpiod_set_array_value_complex(bool raw, bool can_sleep,
>   			}
>   
>   			if (array_info)
> -				find_next_zero_bit(array_info->set_mask,
> +				i = find_next_zero_bit(array_info->set_mask,
>   						   array_size, i);
>   			else
>   				i++;

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux