Linux IIO Development

• Thread Index

• Re: [PATCH v4 2/3] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: smohanad@xxxxxxxxxxxxxx
• Re: [PATCH v3 2/3] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: smohanad@xxxxxxxxxxxxxx
• [PATCH v3 2/9] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 1/9] iio: imu: mpu6050: add support for regulator framework
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 3/9] iio: tsl2772: add support for reading proximity led settings from device tree
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 4/9] dt-bindings: iio: tsl2772: add new bindings
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 5/9] iio: tsl2772: add support for regulator framework
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 7/9] iio: tsl2772: add support for avago,apds9930
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 8/9] dt-bindings: iio: tsl2772: add binding for avago,apds9930
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 9/9] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 6/9] dt-bindings: iio: tsl2772: add bindings for regulator framework
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 0/9] treewide: add support for various sensors on the LG Nexus 5 (hammerhead)
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: adc: add support for mcp3911
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3 1/3] iio: adc: add support for mcp3911
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3 3/3] MAINTAINERS: Add entry for mcp3911 ADC driver
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: iio: adc: add bindings for mcp3911
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: light: Add support for vishay vcnl4035
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 1/3] iio: Add modifier for white light
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: light: Add support for vishay vcnl4035
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: adc: add support for mcp3911
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v4 2/3] iio: light: Add support for vishay vcnl4035
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v4 3/3] iio: light: Add device tree binding for vishay vcnl4035
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v4 1/3] iio: Add modifier for white light
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• Re: [PATCH v3 1/2] iio: light: Add support for vishay vcnl4035
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• Re: [PATCH v2 1/6] iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/6] iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• Re: [PATCH v2 1/6] iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2 4/6] iio:adxl372: Add FIFO and interrupts support
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: Add device tree binding for vishay vcnl4035
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: light: Add support for vishay vcnl4035
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v2 3/6] regmap: Add regmap_pipe_read API
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v3 1/2] iio: light: Add support for vishay vcnl4035
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v3 2/2] iio: light: Add device tree binding for vishay vcnl4035
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PULL V2] 3rd set of new IIO device support, features, cleanups and fixes for the 4.19 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 3/3] iio: adc: Update QCOM ADC license to SPDX format
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• [PATCH v4 2/3] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• [PATCH v4 0/3] Add QCOM PMIC5 ADC driver
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• Re: [PULL V2] 3rd set of new IIO device support, features, cleanups and fixes for the 4.19 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] 3rd set of new IIO device support, features, cleanups and fixes for the 4.19 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] 3rd set of new IIO device support, features, cleanups and fixes for the 4.19 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PULL] 3rd set of new IIO device support, features, cleanups and fixes for the 4.19 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: si1133: fix uninitialized resp variable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: si1133: fix an && vs || typo
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC
  • From: smohanad@xxxxxxxxxxxxxx
• Re: [PATCH v2 4/6] iio:adxl372: Add FIFO and interrupts support
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 6/6] iio:adxl372: Add filter bandwidth support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 5/6] iio:adxl372: Add sampling frequency support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 4/6] iio:adxl372: Add FIFO and interrupts support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 3/6] regmap: Add regmap_pipe_read API
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 2/6] dt-bindings: iio: accel: Add docs for ADXL372
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v2 1/6] iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH 1/4] treewide: convert ISO_8859-1 text comments to utf-8
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] iio: light: si1133: fix uninitialized resp variable
  • From: Maxime Roussin-Bélanger <maxime.roussinbelanger@xxxxxxxxx>
• Re: [PATCH] iio: light: si1133: fix uninitialized resp variable
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• [PATCH] iio: light: si1133: fix uninitialized resp variable
  • From: Maxime Roussin-Bélanger <maxime.roussinbelanger@xxxxxxxxx>
• Re: [bug report] iio: light: introduce si1133
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [bug report] iio: light: introduce si1133
  • From: Maxime Roussin-Belanger <maxime.roussinbelanger@xxxxxxxxx>
• [PATCH] iio: light: si1133: fix an && vs || typo
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [bug report] iio: light: introduce si1133
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: smohanad@xxxxxxxxxxxxxx
• Re: Buffert trigger and Power management support for BME680 ?
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: Update QCOM ADC license to SPDX format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: light: fix test for val being not zero or not one.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: ad5770r: Add AD5770R support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Buffert trigger and Power management support for BME680 ?
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Buffert trigger and Power management support for BME680 ?
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: ad5770r: Add AD5770R support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 2/2] iio: dac: ad5770r: Add AD5770R support
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: dac: Add docs for AD5770R DAC
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: Buffert trigger and Power management support for BME680 ?
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• [PATCH] iio: light: fix test for val being not zero or not one.
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Buffert trigger and Power management support for BME680 ?
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• RE: [PATCH v2 2/4] iio: adc: xilinx: limit pcap clock frequency value
  • From: Manish Narani <MNARANI@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: adc: xilinx: Move request_irq before enabling interrupts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: adc: xilinx: Remove platform_get_irq from xadc_remove function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: adc: xilinx: limit pcap clock frequency value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: xilinx: Check for return values in clk related functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: adc: add support for mcp3911
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/4] iio: vcnl4000: add support for VCNL4200
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: vcnl4000: warn on incorrectly specified device id
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: vcnl4000: add VCNL4010 and VCNL4020 device id
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: vcnl4000: make the driver extendable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5] iio: chemical: Add support for Bosch BME680 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad9523: support for external signals via gpios
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad9523: Fix return value for ad952x_store()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: ad9523: Fix return value for ad952x_store()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: ad9523: support for external signals via gpios
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: ad_sigma_delta: use unsigned long for timeout
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: adc: add bindings for mcp3911
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: ad_sigma_delta: use unsigned long for timeout
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v5] iio: chemical: Add support for Bosch BME680 sensor
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• [PATCH v3 2/3] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: smohanad@xxxxxxxxxxxxxx
• [PATCH v3 3/3] iio: adc: Update QCOM ADC license to SPDX format
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• [PATCH v3 0/3] Add QCOM PMIC5 ADC driver
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: smohanad@xxxxxxxxxxxxxx
• Re: [PATCH v2 2/3] dt-bindings: iio: adc: add bindings for mcp3911
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: adc: add bindings for mcp3911
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 4/7] dt-bindings: trivial: remove tsl2772
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] treewide: convert ISO_8859-1 text comments to utf-8
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v3 4/4] iio: vcnl4000: add support for VCNL4200
  • From: Tomas Novotny <tomas.novotny@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/4] iio: vcnl4000: add VCNL4010 and VCNL4020 device id
  • From: Tomas Novotny <tomas.novotny@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/4] iio: vcnl4000: warn on incorrectly specified device id
  • From: Tomas Novotny <tomas.novotny@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/4] iio: vcnl4000: make the driver extendable
  • From: Tomas Novotny <tomas.novotny@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/4] iio: vcnl4000: add support for vcnl4200
  • From: Tomas Novotny <tomas.novotny@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] treewide: convert ISO_8859-1 text comments to utf-8
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller
  • From: Paul Kocialkowski <contact@xxxxxxxx>
• Re: [PATCH v2 0/4] iio: vcnl4000: add support for vcnl4200
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller
  • From: Emmanuel Vadot <manu@xxxxxxxxxxxxxxxx>
• Re: [PULL] IIO: Second set of new device support, cleanups and features for the 4.19 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] ti_am335x_tsc: Enable wakeup capability
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/4] treewide: convert ISO_8859-1 text comments to utf-8
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] treewide: convert ISO_8859-1 text comments to utf-8
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] treewide: convert ISO_8859-1 text comments to utf-8
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 1/4] treewide: convert ISO_8859-1 text comments to utf-8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] treewide: convert ISO_8859-1 text comments to utf-8
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] iio: vcnl4000: add support for vcnl4200
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] treewide: convert ISO_8859-1 text comments to utf-8
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: vcnl4000: add support for VCNL4200
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] IIO: Second set of new device support, cleanups and features for the 4.19 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: iio: adc: add bindings for mcp3911
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v2 3/3] MAINTAINERS: Add entry for mcp3911 ADC driver
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v2 1/3] iio: adc: add support for mcp3911
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH 0/5] ti_am335x_tsc: Enable wakeup capability
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [linux-sunxi] Re: [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller
  • From: Paul Kocialkowski <contact@xxxxxxxx>
• Re: [PATCH 1/4] treewide: convert ISO_8859-1 text comments to utf-8
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 1/4] treewide: convert ISO_8859-1 text comments to utf-8
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v4] iio: chemical: Add support for Bosch BME680 sensor
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v4] iio: chemical: Add support for Bosch BME680 sensor
  • From: David Frey <dfrey@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] iio: vcnl4000: add support for vcnl4200
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: vcnl4000: add support for VCNL4200
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: vcnl4000: add VCNL4010 device id
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH v2 0/4] iio: adc: xilinx: XADC driver Enhancements and bug fixes
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH v2 4/4] iio: adc: xilinx: Move request_irq before enabling interrupts
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH v2 3/4] iio: adc: xilinx: Remove platform_get_irq from xadc_remove function
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH v2 2/4] iio: adc: xilinx: limit pcap clock frequency value
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH v2 1/4] iio: adc: xilinx: Check for return values in clk related functions
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: add support for mcp3911
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH 3/4] iio: adc: xilinx: Check for return values in clk related functions
  • From: Manish Narani <MNARANI@xxxxxxxxxx>
• Re: [PATCH V4] iio: ad9523: replace core mlock with local lock
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• RE: [PATCH 4/4] iio: adc: xilinx: Use devm_ functions while requesting irq
  • From: Manish Narani <MNARANI@xxxxxxxxxx>
• [PATCH] iio: ad_sigma_delta: use unsigned long for timeout
  • From: Nicholas Mc Guire <hofrat@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: adc: add bindings for mcp3911
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH 0/5] ti_am335x_tsc: Enable wakeup capability
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v9 11/11] iio: counter: Add deprecation markings for IIO Counter attributes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 10/11] dt-bindings: counter: Adjust dt-bindings for STM32 lptimer move
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 09/11] counter: stm32-lptimer: add counter device
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 08/11] dt-bindings: counter: Document stm32 quadrature encoder
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 07/11] counter: Add STM32 Timer quadrature encoder
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 06/11] counter: 104-quad-8: Documentation: Add Generic Counter sysfs documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 05/11] counter: 104-quad-8: Add Generic Counter interface support
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 04/11] iio: 104-quad-8: Update license boilerplate
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 03/11] docs: Add Generic Counter interface documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 02/11] counter: Documentation: Add Generic Counter sysfs documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 01/11] counter: Introduce the Generic Counter interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 00/11] Introduce the Counter subsystem
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v4] iio: chemical: Add support for Bosch BME680 sensor
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: add support for mcp3911
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v2 1/7] iio: imu: mpu6050: add support for regulator framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: add support for mcp3911
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/7] iio: imu: mpu6050: add support for regulator framework
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: meson-saradc: add support for the Meson8m2 SoCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: add Meson8m2 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/18] iio: change strncpy+truncation to strlcpy
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: adc: add bindings for mcp3911
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: add support for mcp3911
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ti-ads7950: allow simultaneous use of buffer and direct mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads7950: use SPDX-License-Identifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 01/10] counter: Introduce the Generic Counter interface
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: add support for mcp3911
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 3/3] MAINTAINERS: Add entry for mcp3911 ADC driver
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH 2/3] dt-bindings: iio: adc: add bindings for mcp3911
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH 1/3] iio: adc: add support for mcp3911
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH 2/2] iio: adc: meson-saradc: add support for the Meson8m2 SoCs
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: add Meson8m2 support
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 0/2] meson-saradc: add support for the Meson8m2 SoC
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] iio: adc: ti-ads7950: use SPDX-License-Identifier
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: ti-ads7950: allow simultaneous use of buffer and direct mode
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] iio: adc: ti-ads7950: allow simultaneous use of buffer and direct mode
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v8 00/11] Introduce the Counter subsystem
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 0/5] ti_am335x_tsc: Enable wakeup capability
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: at91-sama5d2_adc: fix up casting in at91_adc_read_info_raw()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 00/11] Introduce the Counter subsystem
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads7950: allow simultaneous use of buffer and direct mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/7] iio: tsl2772: add support for regulator framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: chemical: Add support for Bosch BME680 sensor
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/7] iio: imu: mpu6050: add support for regulator framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/4] iio: vcnl4000: add support for vcnl4200
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: vcnl4000: add support for VCNL4200
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: vcnl4000: warn on incorrectly specified device id
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: vcnl4000: add VCNL4010 device id
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V4] iio: ad9523: replace core mlock with local lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: xilinx: Rename 'channels' variable name to 'iio_xadc_channels'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: xilinx: Rename 'channels' variable name to 'iio_xadc_channels'
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v4] iio: chemical: Add support for Bosch BME680 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: chemical: Add support for Bosch BME680 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 01/10] counter: Introduce the Generic Counter interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 3/4] iio: adc: xilinx: Check for return values in clk related functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: adc: xilinx: Remove dead code from xadc_zynq_setup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: xilinx: Rename 'channels' variable name to 'iio_xadc_channels'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: sigma-delta-modulator: fix unit-address in example
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: Add modifier for DUV light
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: introduce si1133
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: chemical: Add support for Bosch BME680 sensor
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v4] iio: chemical: Add support for Bosch BME680 sensor
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4] iio: chemical: Add support for Bosch BME680 sensor
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v4] iio: chemical: Add support for Bosch BME680 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4] iio: chemical: Add support for Bosch BME680 sensor
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v2 5/7] iio: tsl2772: add support for regulator framework
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v6 2/3] iio: light: isl29501: Add support for the ISL29501 ToF sensor.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v6 3/3] iio: light: isl29501: Add support floating registers.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v6 1/3] iio: Add channel for Phase
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v6 0/3] Add ISL29501 support.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• Re: [PATCH v2 1/7] iio: imu: mpu6050: add support for regulator framework
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/5] iio:adxl372: Add FIFO and interrupts support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: iio: accel: Add docs for ADXL372
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 2/2] iio: light: introduce si1133
  • From: Maxime Roussin-Bélanger <maxime.roussinbelanger@xxxxxxxxx>
• [PATCH v3 1/2] iio: Add modifier for DUV light
  • From: Maxime Roussin-Bélanger <maxime.roussinbelanger@xxxxxxxxx>
• Re: [PATCH 3/4] iio: adc: xilinx: Check for return values in clk related functions
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: xilinx: Use devm_ functions while requesting irq
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: sigma-delta-modulator: fix unit-address in example
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 1/4] iio: adc: xilinx: Rename 'channels' variable name to 'iio_xadc_channels'
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH 2/4] spi: add new SPI_CS_WORD flag
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/5] ti_am335x_tsc: Enable wakeup capability
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/5] Input: ti_am335x_tsc: Mark TSC device as wakeup source
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 5/5] Input: ti_am335x_tsc: Mark IRQ as wakeup capable
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/4] spi: add new SPI_CS_WORD flag
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Applied "spi: spi-bitbang: change flags from u8 to u16" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/4] spi: add new SPI_CS_WORD flag
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH 1/4] iio: adc: xilinx: Rename 'channels' variable name to 'iio_xadc_channels'
  • From: Manish Narani <MNARANI@xxxxxxxxxx>
• [PATCH 1/4] iio: adc: xilinx: Rename 'channels' variable name to 'iio_xadc_channels'
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: xilinx: Rename 'channels' variable name to 'iio_xadc_channels'
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 0/4] iio: adc: xilinx: XADC driver enhancements and bug fixes
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH 3/4] iio: adc: xilinx: Check for return values in clk related functions
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH 4/4] iio: adc: xilinx: Use devm_ functions while requesting irq
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• [PATCH 2/4] iio: adc: xilinx: Remove dead code from xadc_zynq_setup
  • From: Manish Narani <manish.narani@xxxxxxxxxx>
• Re: [PATCH 0/5] ti_am335x_tsc: Enable wakeup capability
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH V4] iio: ad9523: replace core mlock with local lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v7 01/10] counter: Introduce the Generic Counter interface
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/4] iio: vcnl4000: make the driver extendable
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH v2 4/4] iio: vcnl4000: add support for VCNL4200
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH v2 3/4] iio: vcnl4000: warn on incorrectly specified device id
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH v2 2/4] iio: vcnl4000: add VCNL4010 device id
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH v2 0/4] iio: vcnl4000: add support for vcnl4200
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• Re: [PATCH 0/5] ti_am335x_tsc: Enable wakeup capability
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 2/7] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 4/7] dt-bindings: trivial: remove tsl2772
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 5/7] iio: tsl2772: add support for regulator framework
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 7/7] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 6/7] iio: tsl2772: add device tree binding for avago,apds9930
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 1/7] iio: imu: mpu6050: add support for regulator framework
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v2 0/7] ARM: dts: qcom: msm8974-hammerhead: add more sensors
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: at91-sama5d2_adc: fix up casting in at91_adc_read_info_raw()
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• [PATCH 0/4] spi: introduce SPI_CS_WORD mode flag
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 2/4] spi: add new SPI_CS_WORD flag
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 4/4] iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 3/4] spi: spi-davinci: Add support for SPI_CS_WORD
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 1/4] spi: spi-bitbang: change flags from u8 to u16
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: ti-ads7950: allow simultaneous use of buffer and direct mode
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: at91-sama5d2_adc: fix up casting in at91_adc_read_info_raw()
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: [PATCH 05/18] iio: change strncpy+truncation to strlcpy
  • From: Dominique Martinet <asmadeus@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH V3] iio: ad9523: replace core mlock with local lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3] iio: ad9523: replace core mlock with local lock
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v8 11/11] iio: counter: Add deprecation markings for IIO Counter attributes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v8 10/11] dt-bindings: counter: Adjust dt-bindings for STM32 lptimer move
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v8 09/11] counter: stm32-lptimer: add counter device
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v8 08/11] dt-bindings: counter: Document stm32 quadrature encoder
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v8 07/11] counter: Add STM32 Timer quadrature encoder
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v8 06/11] counter: 104-quad-8: Documentation: Add Generic Counter sysfs documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v8 05/11] counter: 104-quad-8: Add Generic Counter interface support
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v8 04/11] iio: 104-quad-8: Update license boilerplate
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v8 03/11] docs: Add Generic Counter interface documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v8 02/11] counter: Documentation: Add Generic Counter sysfs documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v8 01/11] counter: Introduce the Generic Counter interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v8 00/11] Introduce the Counter subsystem
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 5/5] iio:adxl372: Add filter bandwidth support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 05/18] iio: change strncpy+truncation to strlcpy
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] iio:adxl372: Add filter bandwidth support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] iio:adxl372: Add FIFO and interrupts support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] [v2] Documentation: document ktime_get_*() APIs
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: chemical: Add support for Bosch BME680 sensor
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH] [v2] Documentation: document ktime_get_*() APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adxl345: Add support for the ADXL375
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: add error logs to st_lsm6dsx_read_fifo()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: chemical: Add support for Bosch BME680 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: bmp280: remove unused options from device tree documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: imu: mpu6050: add support for 6515 variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] iio: hx711: fix spurious unit-address in example
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/3] iio: hx711: add delay until DOUT is ready
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/3] iio: hx711: add clock-frequency property in DT
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6] iio: accel: adxl345: add sampling frequency support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: at91-sama5d2_adc: fix up casting in at91_adc_read_info_raw()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: chemical: Add support for Bosch BME680 sensor
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v3] iio: chemical: Add support for Bosch BME680 sensor
  • From: David Frey <dfrey@xxxxxxxxxxxxxxxxxx>
• [PATCH] iio: adxl345: Add support for the ADXL375
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: [PATCH] [v2] Documentation: document ktime_get_*() APIs
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] [v2] Documentation: document ktime_get_*() APIs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 05/18] iio: change strncpy+truncation to strlcpy
  • From: Dominique Martinet <asmadeus@xxxxxxxxxxxxx>
• Re: [PATCH v2 00/10] Split i2c_lock_adapter into i2c_lock_root and i2c_lock_segment
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 00/10] Split i2c_lock_adapter into i2c_lock_root and i2c_lock_segment
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH v2 00/10] Split i2c_lock_adapter into i2c_lock_root and i2c_lock_segment
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] iio:adxl372: Add sampling frequency support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 4/5] iio:adxl372: Add sampling frequency support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 1/5] iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 3/5] iio:adxl372: Add FIFO and interrupts support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 5/5] iio:adxl372: Add filter bandwidth support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 4/5] iio:adxl372: Add sampling frequency support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 2/5] dt-bindings: iio: accel: Add docs for ADXL372
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: imu: mpu6050: add support for 6515 variant
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v3] iio: chemical: Add support for Bosch BME680 sensor
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: irq not handled unless data pushed to buffers
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v3] iio: chemical: Add support for Bosch BME680 sensor
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: add error logs to st_lsm6dsx_read_fifo()
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: smohanad@xxxxxxxxxxxxxx
• Re: [PATCH v2 2/2] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: smohanad@xxxxxxxxxxxxxx
• Re: [PATCH] iio: imu: st_lsm6dsx: irq not handled unless data pushed to buffers
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: irq not handled unless data pushed to buffers
  • From: Jorge Ramirez-Ortiz <jramirez@xxxxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: irq not handled unless data pushed to buffers
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: irq not handled unless data pushed to buffers
  • From: Jorge Ramirez-Ortiz <jramirez@xxxxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: irq not handled unless data pushed to buffers
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: irq not handled unless data pushed to buffers
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v5 3/3] iio: hx711: fix spurious unit-address in example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 1/3] iio: hx711: add clock-frequency property in DT
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: irq not handled unless data pushed to buffers
  • From: Jorge Ramirez-Ortiz <jramirez@xxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: irq not handled unless data pushed to buffers
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH v3] iio: chemical: Add support for Bosch BME680 sensor
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: irq not handled unless data pushed to buffers
  • From: Jorge Ramirez-Ortiz <jramirez@xxxxxxxxxxxx>
• [PATCH] iio: pressure: bmp280: remove unused options from device tree documentation
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 1/3] iio: imu: mpu6050: add support for 6515 variant
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 0/3] ARM: dts: qcom: msm8974-hammerhead: add support for mpu6515
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v5 3/3] iio: hx711: fix spurious unit-address in example
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v5 2/3] iio: hx711: add delay until DOUT is ready
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v5 1/3] iio: hx711: add clock-frequency property in DT
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v5 0/3] iio: hx711: add data-ready-delay
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v7 01/10] counter: Introduce the Generic Counter interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v7 01/10] counter: Introduce the Generic Counter interface
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 01/10] counter: Introduce the Generic Counter interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v6] iio: accel: adxl345: add sampling frequency support
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH] iio: adc: at91-sama5d2_adc: fix up casting in at91_adc_read_info_raw()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] iio: adc: at91-sama5d2_adc: fix up casting in at91_adc_read_info_raw()
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH] iio: adc: at91-sama5d2_adc: fix up casting in at91_adc_read_info_raw()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: st_accel: iis328dq support?
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH v2] iio: chemical: bme680: Add Bosch BME680 sensor support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: sca3000: Fix missing return in switch
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: chemical: bme680: Add Bosch BME680 sensor support
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v2] iio: chemical: bme680: Add Bosch BME680 sensor support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: sca3000: Fix missing return in switch
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: sca3000: Mark expected switch fall-through
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] iio: dac: Add AD5758 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] dt-bindings: iio: dac: Add docs for AD5758 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3] iio: ad9523: replace core mlock with local lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add device tree binding for vishay vcnl4035
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• Re: [PATCH] iio: mma8452: Mark expected switch fall-through
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: sca3000: Mark expected switch fall-through
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:imu:adis: Mark expected switch fall-throughs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: light: isl29501: Add support for the ISL29501 ToF sensor.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: dac: remove redundant pointer chip_info and spi_dev_id
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: remove redundant variable 'shift'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/4] iio: accel: adxl345: add link to datasheet
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/4] iio: accel: adxl345: add sampling frequency support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] IIO: st_accel_i2c.c: Simplify access to driver data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: Add support for vishay vcnl4035
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ina2xx: avoid kthread_stop() with stale task_struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 01/10] counter: Introduce the Generic Counter interface
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add device tree binding for vishay vcnl4035
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 00/10] Introduce the Counter subsystem
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [v7,03/10] docs: Add Generic Counter interface documentation
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v7 00/10] Introduce the Counter subsystem
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: hx711: add clock-frequency property in DT
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: introduce si1133
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: introduce si1133
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: introduce si1133
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v7 00/10] Introduce the Counter subsystem
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• RE: st_accel: iis328dq support?
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• Re: [v7,03/10] docs: Add Generic Counter interface documentation
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: st_accel: iis328dq support?
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v5 4/4] iio: accel: adxl345: add sampling frequency support
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v2] iio: chemical: bme680: Add Bosch BME680 sensor support
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• st_accel: iis328dq support?
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH v4 1/3] iio: hx711: add clock-frequency property in DT
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: hx711: warning in dt binding example doc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: hx711: add clock-frequency property in DT
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/2] dt-bindings: iio: dac: Add docs for AD5758 DAC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 09/10] dt-bindings: counter: Adjust dt-bindings for STM32 lptimer move
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 07/10] dt-bindings: counter: Document stm32 quadrature encoder
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: introduce si1133
  • From: Maxime Roussin-Belanger <maxime.roussinbelanger@xxxxxxxxx>
• [PATCH V3] iio: ad9523: replace core mlock with local lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/2] IIO: st_accel_i2c.c: Simplify access to driver data
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 0/2] IIO: st_sensors_i2c: improve device enumeration
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] IIO: st_accel_i2c.c: Simplify access to driver data
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/4] iio: accel: adxl345: add calibration offset and sampling frequency support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 4/4] iio: accel: adxl345: add sampling frequency support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [v7,03/10] docs: Add Generic Counter interface documentation
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 1/2] IIO: st_accel_i2c.c: Simplify access to driver data
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 4/5] iio: adc: ti_am335x_adc: Disable ADC during suspend unconditionally
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v5 2/2] dt-bindings: iio: dac: Add docs for AD5758 DAC
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v5 1/2] iio: dac: Add AD5758 support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• [PATCH v3 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/2] IIO: st_sensors_i2c: improve device enumeration
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/2] IIO: st_accel_i2c.c: Simplify access to driver data
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: dac: Add AD5758 support
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 3/3] iio: hx711: warning in dt binding example doc
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• [PATCH v4 2/3] iio: hx711: add delay until DOUT is ready
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v4 1/3] iio: hx711: add clock-frequency property in DT
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v4 0/3] iio: hx711: add data-ready-delay
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] IIO: st_accel_i2c.c: Simplify access to driver data
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/5] mfd: ti_am335x_tscadc: Keep ADC interface on if child is wakeup capable
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/5] mfd: ti_am335x_tscadc: Don't mark TSCADC MFD as wakeup capable
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 09/10] mfd: 88pm860x-i2c: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/2] IIO: st_accel_i2c.c: Simplify access to driver data
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/4] iio: hx711: add data-ready-delay-ns property in DT
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] IIO: st_accel_i2c.c: Simplify access to driver data
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: mma8452: Mark expected switch fall-through
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• [PATCH] iio: sca3000: Mark expected switch fall-through
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• [PATCH] iio:imu:adis: Mark expected switch fall-throughs
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: light: introduce si1133
  • From: Maxime Roussin-Belanger <maxime.roussinbelanger@xxxxxxxxx>
• Re: [PATCH v2] iio: light: introduce si1133
  • From: Maxime Roussin-Belanger <maxime.roussinbelanger@xxxxxxxxx>
• Re: [v7,03/10] docs: Add Generic Counter interface documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [v7,03/10] docs: Add Generic Counter interface documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [v7, 02/10] counter: Documentation: Add Generic Counter sysfs documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 1/2] iio: light: Add support for vishay vcnl4035
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• Re: [PATCH v2 1/2] iio: light: Add support for vishay vcnl4035
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v3 3/3] iio: hx711: warning in dt binding example doc
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 2/3] iio: hx711: add delay until DOUT is ready
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 1/3] iio: hx711: add avia,data-ready-delay-ns property in DT
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 0/3] iio: hx711: add data-ready-delay
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] IIO: st_sensors_i2c: improve device enumeration
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] IIO: st_accel_i2c.c: Simplify access to driver data
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] IIO: st_sensors_i2c: improve device enumeration
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 00/10] Introduce the Counter subsystem
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [v7,07/10] dt-bindings: counter: Document stm32 quadrature encoder
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [v7,03/10] docs: Add Generic Counter interface documentation
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [v7,03/10] docs: Add Generic Counter interface documentation
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [v7, 02/10] counter: Documentation: Add Generic Counter sysfs documentation
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v7 00/10] Introduce the Counter subsystem
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] IIO: st_sensors_i2c: improve device enumeration
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: add channel type for frequency
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] IIO: st_accel_i2c.c: Use fallback if DT/ACPI enum failed
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] iio: add channel type for frequency
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] iio: dac: remove redundant variable 'shift'
  • From: Sean Nyekjær <sean.nyekjaer@xxxxxxxxx>
• [PATCH] iio: dac: remove redundant variable 'shift'
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] iio: dac: remove redundant pointer chip_info and spi_dev_id
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH v5 2/2] iio: light: isl29501: Add support for the ISL29501 ToF sensor.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v5 1/2] iio: Add channel for Phase
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v5 0/2] Add ISL29501 support.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: isl29501: Add support for the ISL29501 ToF sensor.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• Re: [PATCH] iio: adc: ina2xx: avoid kthread_stop() with stale task_struct
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH V2] iio: ad9523: replace core mlock with local lock
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 3/3] IIO: st_accel.h: sync DT and I2C device ID table strings
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] IIO: st_accel_i2c.c: Use fallback if DT/ACPI enum failed
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] IIO: st_sensors_i2c: improve device enumeration
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add Spreadtrum SC27XX PMICs ADC support
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: Potential IIO meeting / future directions discussion at ELCE 2018 - Edinburgh 22-24 Oct
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] iio: add channel type for frequency
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: Potential IIO meeting / future directions discussion at ELCE 2018 - Edinburgh 22-24 Oct
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: Potential IIO meeting / future directions discussion at ELCE 2018 - Edinburgh 22-24 Oct
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: Potential IIO meeting / future directions discussion at ELCE 2018 - Edinburgh 22-24 Oct
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: Potential IIO meeting / future directions discussion at ELCE 2018 - Edinburgh 22-24 Oct
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] iio: add channel type for frequency
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] iio: humidity: hts221: Fix sensor reads after resume
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• [PATCH] iio: add channel type for frequency
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: dac: Add AD5758 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH V2] iio: ad9523: Fix displayed phase
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add Spreadtrum SC27XX PMICs ADC support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: Mostly question of whether we should support floating point values from hardware (was Re: isl29501 and multiple calibration registers)
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC 3/3] iio: imu: bme680: Add ACPI support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ina2xx: avoid kthread_stop() with stale task_struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: hx711: warning in dt binding example doc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: hx711: add maintainer for driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: hx711: add data-ready-delay-ns property in DT
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2] iio: ad9523: replace core mlock with local lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/4] iio: accel: adxl345: add calibration offset support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/4] iio: accel: adxl345: convert address field usage in iio_chan_spec
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/4] iio: accel: adxl345: add link to datasheet
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] staging:iio:impedance-analyzer:ad5933: Macro replacement Cleanups.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: introduce si1133
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: introduce si1133
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v5 4/4] iio: accel: adxl345: add sampling frequency support
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v5 3/4] iio: accel: adxl345: add calibration offset support
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v5 2/4] iio: accel: adxl345: convert address field usage in iio_chan_spec
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v5 1/4] iio: accel: adxl345: add link to datasheet
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v5 0/4] iio: accel: adxl345: add calibration offset and sampling frequency support
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: isl29501: Add support for the ISL29501 ToF sensor.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: dac: Add docs for AD5758 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: dac: Add AD5758 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] IIO: st_accel.h: sync DT and I2C device ID table strings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] IIO: st_accel_i2c.c: Use fallback if DT/ACPI enum failed
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: adc: ti_am335x_adc: Disable ADC during suspend unconditionally
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/5] ti_am335x_tsc: Enable wakeup capability
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 1/5] mfd: ti_am335x_tscadc: Don't mark TSCADC MFD as wakeup capable
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 3/5] mfd: ti_am335x_tscadc: Keep ADC interface on if child is wakeup capable
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 4/5] iio: adc: ti_am335x_adc: Disable ADC during suspend unconditionally
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 5/5] Input: ti_am335x_tsc: Mark IRQ as wakeup capable
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 2/5] Input: ti_am335x_tsc: Mark TSC device as wakeup source
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v2 1/2] iio: light: Add support for vishay vcnl4035
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: light: Add support for vishay vcnl4035
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 0/3] IIO: st_sensors_i2c: improve device enumeration
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] iio: light: Add support for vishay vcnl4035
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• [PATCH v2 1/2] iio: light: Add support for vishay vcnl4035
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v2 2/2] iio: light: Add device tree binding for vishay vcnl4035
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• Re: [RFC 3/3] iio: imu: bme680: Add ACPI support
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH 2/3] IIO: st_sensors_i2c.c: Don't print error on failed ACPI match
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] IIO: st_accel_i2c.c: Use fallback if DT/ACPI enum failed
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] IIO: st_sensors_i2c: improve device enumeration
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] IIO: st_accel.h: sync DT and I2C device ID table strings
  • From: Nikolaus Voss <nikolaus.voss@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: dac: Add AD5758 support
  • From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
• [PATCH v4 2/2] dt-bindings: iio: dac: Add docs for AD5758 DAC
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v4 1/2] iio: dac: Add AD5758 support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: Potential IIO meeting / future directions discussion at ELCE 2018 - Edinburgh 22-24 Oct
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH 4/4] staging:iio:adc:ad7280a: Use GFP_ATOMIC in interrupt handler
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: dac: Add AD5758 support
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH] staging:iio:adc:ad7280a: Use GFP_ATOMIC in interrupt handler
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] staging:iio:adc:ad7280a: Use GFP_ATOMIC in interrupt handler
  • From: Karim Eshapa <karim.eshapa@xxxxxxxxx>
• [PATCH] staging:iio:adc:ad7280a: Use GFP_ATOMIC in interrupt handler
  • From: Karim Eshapa <karim.eshapa@xxxxxxxxx>
• [PATCH 4/4] staging:iio:adc:ad7280a: Use GFP_ATOMIC in interrupt handler
  • From: Karim Eshapa <karim.eshapa@xxxxxxxxx>
• Re: [PATCH v3 1/2] iio: dac: Add AD5758 support
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• [PATCH v2 2/2] iio: adc: Add QCOM SPMI PMIC5 ADC driver
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] Add QCOM PMIC5 ADC driver
  • From: Siddartha Mohanadoss <smohanad@xxxxxxxxxxxxxx>
• Re: Potential IIO meeting / future directions discussion at ELCE 2018 - Edinburgh 22-24 Oct
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: dac: Add AD5758 support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [RFC PATCH] iio: dac: cmpfunc() can be static
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Re: [PATCH 1/2] iio: light: Add support for vishay vcnl4035
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] iio: light: introduce si1133
  • From: Maxime Roussin-Belanger <maxime.roussinbelanger@xxxxxxxxx>
• [PATCH v4 2/2] iio: light: isl29501: Add support for the ISL29501 ToF sensor.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v4 1/2] iio: Add channel for Phase
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v4 0/2] Add ISL29501 support.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• Potential IIO meeting / future directions discussion at ELCE 2018 - Edinburgh 22-24 Oct
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• [PATCH v3 2/2] iio: light: isl29501: Add support for the ISL29501 ToF sensor.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v3 1/2] iio: Add channel for Phase
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: isl29501: Add support for the ISL29501 ToF sensor.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH 1/2] iio: light: Add support for vishay vcnl4035
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH 2/2] iio: light: Add device tree binding for vishay vcnl4035
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v3 2/2] dt-bindings: iio: dac: Add docs for AD5758 DAC
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v3 1/2] iio: dac: Add AD5758 support
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH v2] iio: humidity: hts221: Fix sensor reads after resume
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• [PATCH v2] iio: humidity: hts221: Fix sensor reads after resume
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] iio: accel: adxl345: add sampling frequency support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: light: introduce si1133
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: isl29501: Add support for the ISL29501 ToF sensor.
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: Mostly question of whether we should support floating point values from hardware (was Re: isl29501 and multiple calibration registers)
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v2 2/2] iio: light: isl29501: Add support for the ISL29501 ToF sensor.
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v2 1/2] iio: Add channel for Phase
  • From: Mathieu Othacehe <m.othacehe@xxxxxxxxx>
• [PATCH v2] iio: light: introduce si1133
  • From: Maxime Roussin-Bélanger <maxime.roussinbelanger@xxxxxxxxx>
• Re: [PATCH v2 10/10] i2c: remove i2c_lock_adapter and use i2c_lock_bus directly
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v2 01/10] tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)
  • From: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/10] tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)
  • From: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/10] tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)
  • From: Alexander Steffen <Alexander.Steffen@xxxxxxxxxxxx>
• Re: [PATCH v2 10/10] i2c: remove i2c_lock_adapter and use i2c_lock_bus directly
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2 00/10] Split i2c_lock_adapter into i2c_lock_root and i2c_lock_segment
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PULL] First set of new device support, features and cleanup for IIO in the 4.19 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] First set of IIO fixes for the 4.18 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PULL] First set of new device support, features and cleanup for IIO in the 4.19 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] First set of IIO fixes for the 4.18 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] staging:iio:impedance-analyzer:ad5933: Macro replacement Cleanups.
  • From: Karim Eshapa <karim.eshapa@xxxxxxxxx>
• [PATCH v4 3/4] iio: accel: adxl345: add calibration offset support
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 4/4] iio: accel: adxl345: add sampling frequency support
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 2/4] iio: accel: adxl345: convert address field usage in iio_chan_spec
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 1/4] iio: accel: adxl345: add link to datasheet
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 0/4] iio: accel: adxl345: add calibration offset and sampling frequency support
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v2 4/4] iio: hx711: warning in dt binding example doc
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 3/4] iio: hx711: add maintainer for driver
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 2/4] iio: hx711: add delay until DOUT is ready
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 1/4] iio: hx711: add data-ready-delay-ns property in DT
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 0/4] iio: hx711: add data-ready-delay
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v2 01/10] tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)
  • From: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>
• Re: [RFC 3/3] iio: imu: bme680: Add ACPI support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2] iio: ad9523: Fix displayed phase
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH V2] iio: ad9523: replace core mlock with local lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: ad9523: replace core mlock with local lock
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [RFC 3/3] iio: imu: bme680: Add ACPI support
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH] iio: ad9523: replace core mlock with local lock
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: ad9523: Fix displayed phase
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: ad9523: replace core mlock with local lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] staging:iio:impedance-analyzer:ad5933: Macro replacment Cleanups.
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add Spreadtrum SC27XX PMICs ADC support
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add Spreadtrum SC27XX PMICs ADC support
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [PATCH] staging:iio:impedance-analyzer:ad5933: Macro replacment Cleanups.
  • From: Karim Eshapa <karim.eshapa@xxxxxxxxx>
• [PATCH] iio: adc: ina2xx: avoid kthread_stop() with stale task_struct
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH v3 2/4] iio: accel: adxl345: use scan_index for accessing accel registers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: at91-sama5d2_adc: add support for oversampling resolution
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4.18 REGRESSION fix] iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:buffer: fix iio_dma_buffer_set_length() prototype mismatch
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: hx711: add data-ready-delay-ns property in DT
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add Spreadtrum SC27XX PMICs ADC support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: use timespec64 based interfaces for iio_get_time_ns()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: accel: adxl345: use scan_index for accessing accel registers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] staging:iio:accel:adis16240: sign extend function replace hard code duplication
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add Spreadtrum SC27XX PMICs ADC support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: hx711: add data-ready-delay-ns property in DT
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: Add Spreadtrum SC27XX PMICs ADC controller documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: buffer: fix the function signature to match implementation
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] iio: adc: Remove depends on HAS_DMA in case of platform dependency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: hx711: add delay until DOUT is ready
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: hx711: add data-ready-delay-ns property in DT
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: introduce si1133
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add Spreadtrum SC27XX PMICs ADC support
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [PATCH 3/3] iio: hx711: add maintainer for driver
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 2/3] iio: hx711: add delay until DOUT is ready
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 1/3] iio: hx711: add data-ready-delay-ns property in DT
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 0/3] iio: hx711: add data-ready-delay
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH] iio: light: introduce si1133
  • From: Maxime Roussin-Bélanger <maxime.roussinbelanger@xxxxxxxxx>
• Re: [PATCH 2/2] iio: light: isl29501: Add support for the ISL29501 ToF sensor.
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: Add channel for Phase
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v7 00/10] Introduce the Counter subsystem
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v7 08/10] counter: stm32-lptimer: add counter device
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v7 06/10] counter: Add STM32 Timer quadrature encoder
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v7 05/10] counter: 104-quad-8: Documentation: Add Generic Counter sysfs documentation
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v7 04/10] counter: 104-quad-8: Add Generic Counter interface support
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v7 03/10] docs: Add Generic Counter interface documentation
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>