The following changes since commit cbebe5d05dd7fe2fdd13cff7c4a62f22109f1f95:
staging: erofs: match alignment with open parentheses (2019-02-19 15:18:49 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.2a
for you to fetch changes up to 5e79cef581ffcf277c8d10c6373ec7a1be79c5c9:
iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion (2019-03-31 12:07:17 +0100)
----------------------------------------------------------------
First set of new device support, features and fixes for IIO in the 5.2 cycle.
Note includes, an immutable branch from MFD to bring in the stmpe code
to which some fixes were later made.
Staging graduations
* ad7780
- Move this ADC driver out of staging. Included adding some new features
along the way (see below). Also added DT bindings.
New device support
* adis16480
- Support the ADIS16495 and ADIS16497 IMU devices making
heavy use of refactoring of various aspects of the driver in precursor
patches.
* lsm6dsx
- Support for the ASM330LHH 6-axis (accelerometer + gyro) sensor.
- Support for the LSM6DS0X
* matbotix mb1232
- New driver for this ultrasound ranging device family. Including bindings.
- Supports mb1202, mb1212, mb1222, mb1232, mb1242, mb7040 and mb7137.
* max31856
- New driver for this thermocouple temperature sensor.
* meson saradc
- Support the Meson-G12A (ID addition only).
* stmpe-adc
- New driver supporting generic ADC alongside touchscreen support which
previously existed. Includes DT bindings.
* vcnl4000
- Support for the vcln4040 proximity and light sensor, including adding
DT bindings for this and parts previously supported.
Features
* core
- Allow reading of mount matrices from ACPI in addition to DT.
- Common binding for theromcouple types.
* ad5933
- Add ABI docs as there are a few 'unsual' elements about this
device - perhaps because it's our only impedance analyser.
* ad7780
- Add gain and filter gpio support + readback of current gain and filter.
* adis16480
- Allow selection fo the dataready pin to be used.
- Device tree ID table and binding documentation.
- Support external clock modes, including new bindings.
* bma180
- Mount matrix support.
* bmc150
- Mount matrix support.
* bmg160
- Mount matrix support.
- DT id table and bindings doc.
* bmp280
- Put calibration data into the entropy pool.
* hmc5843
- Mount matrix support.
* itg3200
- Mount matrix support.
* kxcjk1013
- Device tree id table, and binding docs.
* lpc32xx
- Add scale when regulator specified including DT docs for regulator.
* pms7003
- Add device IDs for all supported parts to driver and binding.
* stm32-dfsdm
- Enable hw consumer support, scan mode control and a complex set of
triggered buffer modes.
- Power management.
* stm32-lptimer-counter
- power management.
- Document the pinctrl sleep state binding.
* ti-ads7950
- GPIO pin support.
Cleanups, minor fixes
* core
- Use bitmap_zalloc to make it explicit that is what we are doing.
- Tidy up all the Kconfig files (which had slowly gotten messy)
- Fix a forwards definition missing issue in iio/driver.h
* ad sigma delta core
- Improve handling of SPI bus locking vs CS assertion. This has been
wrong a long time so not rushing this in.
* ad5064
- Mlock to local lock.
* ad5933 (staging cleanup)
- Multiline comment fixes.
- Include ordering.
- SPDX.
- Tidy up Kconfig help which was a bit missleading.
- Change some non standard attributes to ABI defined ones.
* ad7124
- White space fix.
* ad7192
- White space.
- Use DT clock binding.
- Improve error reporting.
- Platform data to DT conversion.
- Use read_avail callback, mostly to avoid the endless series of
patches from new contributors trying to falsely put spaces around
the negative sign.
* ad7280a
- Add brackets to macros to avoid potential precedence isseus.
- Add temp vars for event codes to reduce indent and improved readability.
- Clean out som CamelCase notation.
- White space.
* ad7606
- Fix broken file naming in MAINTAINERS.
* ad7766
- White space fixes.
* ad7780
- Missing switch defaults to supress warnings and harden the code slightly.
- Set pattern masks more directly.
- Add ID values and masks for all supported chips.
- SPDX + add Renato as a copyright holder as he has done a lot of work on
this driver.
- Add brackets to macros to avoid potential precedence issues.
* ad7923
- White space fixes.
- Use BIT macro to improve readability.
- Add brackets to macros to avoid potential precedence issues.
- Tidy up a null comparisom.
* ad9523
- Fix a typo in naming of variables.
* adis16400
- Combine trigger file into main code as no advantage in separate files.
Rename core file to just adis16400.
- Squash the header into the c file now there is only one file.
- Generalize burst mode to support new variants.
* ak8975
- Local variable to improve readability around mount matrix support.
* as3935
- Avoid potential race by ensuring remove does exact opposite of
probe rather than a slightly different order.
* cross_ec
- Drop some unnecessary includes.
- Fix some warning and the slightly 'unusual' code.
- Add some docs for non obvious function.
- SPDX
* hmc5843
- Potential unhandled error case.
* iio trigger core
- Print an error if there is no available irq due to max consumers per
trigger being set to low.
* iio loop trigger
- Drop an unlikely on IS_ERR as IS_ERR already has the annotation.
* ingenic-adc
- Drop a redundant dev_err call as devm_ioremap_resource reports the same
internally.
* lmp91000
- Drop some unncessary parentheses and white space tidy up.
- Invert and if statement to improve readability.
- Fix a wrong error message.
* lpc32xx
- Header sorting + drop some unused ones.
* mma8542
- Mark a switch fallthrough.
* mpu6050
- Add a local variable to improve code readability around mount matrix
support.
* mxs-lradc-adc
- Handle devm_iio_trigger_alloc failure.
* sps30
- Fix up a kernel version in the ABI docs.
* srf04
- DT binding doc converted to yaml.
* ssp_sensors
- Supress a clang build warning due to lack of visibility of conditional
within a iio_push_to_buffers_with_timestamp. (reasonable false warning!)
* st_accel
- Drop pointless less than 0 comparisom of unsigned int.
* stm32-dfsdm
- Improve accuracy of spi_master_frequency calculation.
- Improve calculation fo sampling frequency.
- Rework various internals to simplify adding triggered buffer support.
- Claim direct mode to avoid racing around read_raw and being in buffered
mode.
* stmpe
- Some tidy ups from the mfd tree (immutable branch)
- Fix a clang false positive warning.
* ti-ads7950
- Use local lock rather than using the core mlock when not locking around
the device mode.
* vcnl4000
- Use word writes instead of byte writes. It seems byte writes are fine
for some parts (undocument) but not others that the driver will shortly
support.
Other
* mailmap
- Add email address change for Sean Nyekjaer. Update in relevant drivers
----------------------------------------------------------------
Alexandru Ardelean (5):
iio: imu: adis16400: move trigger handler into adis16400_core
iio: imu: adis: generalize burst mode support
iio: imu: adis16400: move burst logic to ADIS lib
iio: imu: adis16400: rename adis16400_core.c -> adi16400.c
iio: imu: adis16400: move adis16400.h into adis16400.c
Anderson Reis (3):
iio:potentiostat:lmp91000: reduce line width and remove blank line
iio:potentiostat:lmp91000: invert if statement
iio:potentiostat:lmp91000: change dev_err message
Andreas Klinger (5):
dt-bindings: Add vendor prefix for MaxBotix
dt-bindings: maxbotix,mb1232: Add MaxBotix i2c ultrasonic rangers
mb1232.c: add distance iio sensor with i2c
MAINTAINERS: add maintainer for maxbotix ultrasonic driver
devantech-srf04.yaml: transform DT binding to YAML
Andy Shevchenko (3):
iio: Allow to read mount matrix from ACPI
iio: buffer: Switch to bitmap_zalloc()
iio: Make possible to include driver.h first
Angus Ainslie (Purism) (5):
iio: light: vcnl4000 use word writes instead of byte writes
iio: light: vcnl4000 add devicetree hooks
dt-bindings: iio: light: add vcnl4000 devicetree bindings
iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor
dt-bindings: iio: light: add vcnl4040 devicetree bindings
Bárbara Fernandes (4):
iio:adc:ad7923: Align broken line to parenthesis
iio:adc:ad7923: Use BIT macro instead of bitshift
iio:adc:ad7923: Put macro argument between ()'s
iio:adc:ad7923: Rewrite comparison to NULL
Camylla Gonçalves Cantanheide (1):
iio: adc: ad7766: Change alignment to match paranthesis
Chengguang Xu (1):
iio: remove redundant unlikely annotation
Colin Ian King (2):
iio: st_accel: remove redundant unsigned less than zero check
iio: adc: ad7124 fix indentation issue, remove extra tab
Cristian Sicilia (4):
staging: iio: adc: ad7280a: Avoid precedence issues in macro
staging: iio: adc: ad7280a: Adding temp var to improve readability
staging: iio: adc: ad7280a: Remove CamelCase notation
staging: iio: adc: ad7280a: Tab alignment
Enric Balletbo i Serra (1):
iio: cros_ec: Switch to SPDX identifier.
Enrico Weigelt, metux IT consult (1):
drivers: iio: Kconfig: pedantic cleanup
Fabrice Gasnier (12):
dt-bindings: iio: stm32-lptimer-counter: document pinctrl sleep state
iio: counter: stm32-lptimer: Add power management support
iio: adc: stm32-dfsdm: make spi_master_freq more accurate
iio: adc: stm32-dfsdm: continuous mode depends on current mode
iio: adc: stm32-dfsdm: move dma enable from start_conv() to start_dma()
iio: adc: stm32-dfsdm: move dma slave config to start routine
iio: adc: stm32-dfsdm: enable hw consumer
iio: adc: stm32-dfsdm: add support for scan mode
iio: adc: stm32-dfsdm: add support for buffer modes
iio: adc: stm32-dfsdm: claim direct mode for raw read and settings
iio: adc: stm32-dfsdm: improve sampling frequency accuracy
iio: adc: stm32-dfsdm: add PM support
Gregory CLEMENT (4):
iio: adc: lpc32xx: Sort headers
iio: adc: lpc32xx: Cleanup headers
iio: adc: lpc32xx: Add scale feature
dt-bindings: iio: adc: lpc32xx-adc: Document vref-supply
Guenter Roeck (1):
iio: cros_ec: Drop unnecessary include files
Gustavo A. R. Silva (2):
iio: mma8452: mark expected switch fall-through
iio: cros_ec_accel_legacy: Refactor code in cros_ec_accel_legacy_probe
Gwendal Grignou (1):
iio: cros_ec: Add kernel-doc for cros_ec_sensors_read_lpc
H. Nikolaus Schaller (10):
iio: accel: bmc150: add mount matrix support
iio: accel: bma180: add mount matrix support
iio: gyro: bmg160: add mount matrix support
iio: gyro: itg3200: add mount matrix support
iio: magnetometer: bmc150: add mount matrix support
iio: magnetometer: hmc5843: add mount matrix support
iio: mpu6050: improve code readability
iio: ak8975: improve code readability
iio: gyro: bmg160: add device tree compatibility table
dt-bindings: iio: add Bosch BMG160 gyroscope sensor
Jonathan Cameron (1):
iio:dac:ad5064 mlock cleanup - move to a local lock.
Justin Chen (2):
iio: adc: ti-ads7950: Fix improper use of mlock
iio: adc: ti-ads7950: add GPIO support
Kangjie Lu (2):
iio: adc: fix a potential NULL pointer dereference
iio: hmc5843: fix potential NULL pointer dereferences
Lars-Peter Clausen (2):
iio: frequency: ad9523: Fix typo in ad9523_platform_data
iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion
Linus Walleij (1):
iio: pressure: bmp280: BMP280 calibration to entropy
Lorenzo Bianconi (4):
iio: imu: st_lsm6dsx: add support to ASM330LHH
dt-bindings: iio: imu: st_lsm6dsx: add asm330lhh device bindings
iio: imu: st_lsm6dsx: add support to LSM6DSOX
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsox device bindings
Lucas Oshiro (1):
iio:potentiostat:lmp91000: remove unnecessary parentheses
Marcelo Schmitt (6):
staging: iio: ad5933: change multi-line comment style
staging: iio: ad5933: organize includes
staging: iio: ad5933: add SPDX identifier
staging: iio: ad5933: change help rule message
staging: iio: ad5933: add ABI documentation
staging: iio: ad5933: change attributes to match ABI
Mathieu Othacehe (1):
iio: trigger: Print an error if there is no available irq
Mircea Caprioru (5):
staging: iio: adc: ad7192: Fix identation
staging: iio: adc: ad7192: Use DT clock binding
staging: iio: adc: ad7192: Report error directly in ad7192_setup
staging: iio: adc: ad7192: Convert platform data to DT properties
staging: iio: adc: ad7192: Use read_avail for available attributes
Nathan Chancellor (2):
iio: common: ssp_sensors: Initialize calculated_time in ssp_common_process_data
iio: adc: stmpe-adc: Shuffle an if statement around in stmpe_adc_isr
Neil Armstrong (2):
dt-bindings: iio: adc: document the Meson G12A support
iio: adc: meson-saradc: add support for Meson G12A
Paresh Chaudhary (2):
iio:temperature:max31856:Add device tree bind info
iio:temperature: Add MAX31856 thermocouple support
Patrick Havelange (1):
dt-bindings: iio/temperature: Add thermocouple types (and doc)
Philippe Schenker (3):
dt-bindings: stmpe: Reformatting parameter list and use tabs only
mfd: stmpe: Move ADC related defines to MFD header
Input: stmpe-ts: preparations for STMPE ADC driver
Renato Lui Geh (11):
staging: iio: ad7780: add gain & filter gpio support
staging: iio: ad7780: add missing switch default case
staging: iio: ad7780: add gain reading to ad778x
staging: iio: ad7780: add filter reading to ad778x
staging: iio: ad7780: set pattern values and masks directly
staging:iio:ad7780: add chip ID values and mask
staging: iio: ad7780: move regulator to after GPIO init
staging: iio: ad7780: add SPDX identifier
staging: iio: ad7780: add new copyright holder
staging: iio: ad7780: moving ad7780 out of staging
staging: iio: ad7780: add device tree binding
Robert Yang (3):
dt-bindings: Add vendor prefix for Kionix, Inc.
dt-bindings: iio: accel: kxcjk1013: Add device tree binding documentation
iio: accel: kxcjk1013: Add device tree support
Sean Nyekjaer (3):
mailmap: Update email for Sean Nyekjaer
iio: adc: ti-ads8688: Update the module author email address
iio: dac: ti-dac5571: Update the module author email address
Stefan Agner (3):
mfd: stmpe: Preparations for STMPE ADC driver
iio: adc: add STMPE ADC driver using IIO framework
iio: adc: add STMPE ADC devicetree bindings
Stefan Popa (10):
iio: imu: adis16480: Add support for configurable drdy indicator
iio: imu: adis16480: Add OF device ID table
iio: imu: adis16480: Treat temperature scale in a generic way
iio: imu: adis16480: Calculate the sampling frequency in a generic way
iio: imu: adis16480: Deal with filter freq in a generic way
iio: imu: adis16480: Add support for ADIS1649x family of devices
iio: imu: adis16480: Add docs for ADIS16480 IMU
iio: imu: adis16480: Add support for external clock
dt-bindings: iio: imu: adis16480: Document external clock
MAINTAINERS: Fix the link to ad7606 dt-bindings
Sven Van Asbroeck (1):
iio: proximity: as3935: fix use-after-free on device remove
Tomasz Duszynski (3):
iio: chemical: pms7003: extend supported sensors list
dt-bindings: iio: chemical: pms7003: extend supported sensors list
iio: chemical: sps30: fix attribute kernel version
Vladimir Petrigo (1):
iio: adc: ad7780: Add parentheses to macros
Wei Yongjun (1):
iio: adc: ingenic: remove redundant dev_err call in ingenic_adc_probe()
.mailmap | 1 +
.../sysfs-bus-iio-impedance-analyzer-ad5933 | 19 +-
Documentation/ABI/testing/sysfs-bus-iio-sps30 | 2 +-
.../ABI/testing/sysfs-bus-iio-temperature-max31856 | 24 +
.../bindings/iio/accel/kionix,kxcjk1013.txt | 17 +
.../devicetree/bindings/iio/adc/adi,ad7780.txt | 48 ++
.../bindings/iio/adc/amlogic,meson-saradc.txt | 1 +
.../devicetree/bindings/iio/adc/lpc32xx-adc.txt | 5 +
.../devicetree/bindings/iio/adc/stmpe-adc.txt | 21 +
.../bindings/iio/chemical/plantower,pms7003.txt | 8 +-
.../bindings/iio/counter/stm32-lptimer-cnt.txt | 8 +-
.../devicetree/bindings/iio/gyroscope/bmg160.txt | 20 +
.../devicetree/bindings/iio/imu/adi,adis16480.txt | 85 +++
.../devicetree/bindings/iio/imu/st_lsm6dsx.txt | 2 +
.../devicetree/bindings/iio/light/vcnl4000.txt | 24 +
.../bindings/iio/proximity/devantech-srf04.txt | 28 -
.../bindings/iio/proximity/devantech-srf04.yaml | 59 ++
.../bindings/iio/proximity/maxbotix,mb1232.txt | 29 +
.../bindings/iio/temperature/max31856.txt | 24 +
.../iio/temperature/temperature-bindings.txt | 7 +
.../bindings/input/touchscreen/stmpe.txt | 116 +++-
Documentation/devicetree/bindings/mfd/stmpe.txt | 28 +-
.../devicetree/bindings/vendor-prefixes.txt | 2 +
MAINTAINERS | 10 +-
drivers/iio/Kconfig | 24 +-
drivers/iio/accel/Kconfig | 48 +-
drivers/iio/accel/bma180.c | 18 +-
drivers/iio/accel/bmc150-accel-core.c | 21 +
drivers/iio/accel/cros_ec_accel_legacy.c | 40 +-
drivers/iio/accel/kxcjk-1013.c | 10 +
drivers/iio/accel/kxsd9.c | 4 +-
drivers/iio/accel/mma8452.c | 2 +-
drivers/iio/accel/st_accel_core.c | 2 +-
drivers/iio/adc/Kconfig | 39 +-
drivers/iio/adc/Makefile | 2 +
drivers/iio/adc/ad7124.c | 2 +-
drivers/iio/adc/ad7766.c | 22 +-
drivers/{staging => }/iio/adc/ad7780.c | 179 ++++--
drivers/iio/adc/ad7923.c | 24 +-
drivers/iio/adc/ad_sigma_delta.c | 16 +-
drivers/iio/adc/ingenic-adc.c | 4 +-
drivers/iio/adc/lpc32xx_adc.c | 60 +-
drivers/iio/adc/meson_saradc.c | 8 +
drivers/iio/adc/mxs-lradc-adc.c | 2 +
drivers/iio/adc/stm32-dfsdm-adc.c | 628 ++++++++++++++++-----
drivers/iio/adc/stm32-dfsdm-core.c | 180 +++++-
drivers/iio/adc/stmpe-adc.c | 362 ++++++++++++
drivers/iio/adc/ti-ads7950.c | 219 ++++++-
drivers/iio/adc/ti-ads8688.c | 2 +-
drivers/iio/buffer/industrialio-buffer-cb.c | 10 +-
drivers/iio/chemical/Kconfig | 12 +-
drivers/iio/chemical/pms7003.c | 5 +
.../iio/common/cros_ec_sensors/cros_ec_sensors.c | 12 +-
.../common/cros_ec_sensors/cros_ec_sensors_core.c | 22 +-
drivers/iio/common/ms_sensors/Kconfig | 2 +-
drivers/iio/common/ssp_sensors/ssp_iio.c | 2 +-
drivers/iio/counter/stm32-lptimer-cnt.c | 55 ++
drivers/iio/dac/ad5064.c | 15 +-
drivers/iio/dac/ti-dac5571.c | 2 +-
drivers/iio/frequency/ad9523.c | 16 +-
drivers/iio/gyro/bmg160_core.c | 21 +
drivers/iio/gyro/bmg160_i2c.c | 9 +
drivers/iio/gyro/itg3200_core.c | 20 +
drivers/iio/gyro/mpu3050-core.c | 3 +-
drivers/iio/humidity/Kconfig | 20 +-
drivers/iio/imu/Makefile | 2 -
drivers/iio/imu/{adis16400_core.c => adis16400.c} | 232 +++++++-
drivers/iio/imu/adis16400.h | 215 -------
drivers/iio/imu/adis16400_buffer.c | 101 ----
drivers/iio/imu/adis16480.c | 435 +++++++++++++-
drivers/iio/imu/adis_buffer.c | 40 ++
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 10 +-
drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 8 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 42 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 10 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 10 +
drivers/iio/industrialio-buffer.c | 24 +-
drivers/iio/industrialio-core.c | 46 +-
drivers/iio/industrialio-trigger.c | 5 +-
drivers/iio/light/Kconfig | 274 ++++-----
drivers/iio/light/cros_ec_light_prox.c | 12 +-
drivers/iio/light/vcnl4000.c | 77 ++-
drivers/iio/magnetometer/ak8974.c | 5 +-
drivers/iio/magnetometer/ak8975.c | 13 +-
drivers/iio/magnetometer/bmc150_magn.c | 21 +
drivers/iio/magnetometer/hmc5843.h | 1 +
drivers/iio/magnetometer/hmc5843_core.c | 20 +-
drivers/iio/magnetometer/hmc5843_i2c.c | 7 +-
drivers/iio/magnetometer/hmc5843_spi.c | 7 +-
drivers/iio/potentiometer/Kconfig | 34 +-
drivers/iio/potentiostat/lmp91000.c | 14 +-
drivers/iio/pressure/bmp280-core.c | 6 +
drivers/iio/pressure/cros_ec_baro.c | 11 +-
drivers/iio/proximity/Kconfig | 12 +
drivers/iio/proximity/Makefile | 1 +
drivers/iio/proximity/as3935.c | 50 +-
drivers/iio/proximity/mb1232.c | 272 +++++++++
drivers/iio/temperature/Kconfig | 24 +-
drivers/iio/temperature/Makefile | 1 +
drivers/iio/temperature/max31856.c | 353 ++++++++++++
drivers/iio/trigger/iio-trig-loop.c | 2 +-
drivers/input/touchscreen/stmpe-ts.c | 66 +--
drivers/mfd/Kconfig | 3 +-
drivers/mfd/stmpe.c | 68 +++
drivers/staging/iio/adc/Kconfig | 13 -
drivers/staging/iio/adc/Makefile | 1 -
drivers/staging/iio/adc/ad7192.c | 233 +++++---
drivers/staging/iio/adc/ad7192.h | 9 -
drivers/staging/iio/adc/ad7280a.c | 109 ++--
drivers/staging/iio/impedance-analyzer/Kconfig | 2 +-
drivers/staging/iio/impedance-analyzer/ad5933.c | 54 +-
include/dt-bindings/iio/temperature/thermocouple.h | 16 +
include/linux/iio/adc/ad_sigma_delta.h | 1 +
include/linux/iio/driver.h | 1 +
include/linux/iio/frequency/ad9523.h | 8 +-
include/linux/iio/gyro/itg3200.h | 1 +
include/linux/iio/iio.h | 4 +-
include/linux/iio/imu/adis.h | 14 +
include/linux/mfd/stmpe.h | 21 +
121 files changed, 4397 insertions(+), 1362 deletions(-)
rename {drivers/staging/iio/Documentation => Documentation/ABI/testing}/sysfs-bus-iio-impedance-analyzer-ad5933 (56%)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856
create mode 100644 Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
create mode 100644 Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
create mode 100644 Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt
create mode 100644 Documentation/devicetree/bindings/iio/light/vcnl4000.txt
delete mode 100644 Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt
create mode 100644 Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
create mode 100644 Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt
create mode 100644 Documentation/devicetree/bindings/iio/temperature/max31856.txt
create mode 100644 Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt
rename drivers/{staging => }/iio/adc/ad7780.c (63%)
create mode 100644 drivers/iio/adc/stmpe-adc.c
rename drivers/iio/imu/{adis16400_core.c => adis16400.c} (77%)
delete mode 100644 drivers/iio/imu/adis16400.h
delete mode 100644 drivers/iio/imu/adis16400_buffer.c
create mode 100644 drivers/iio/proximity/mb1232.c
create mode 100644 drivers/iio/temperature/max31856.c
create mode 100644 include/dt-bindings/iio/temperature/thermocouple.h
