Linux IIO Development

• Thread Index

• Re: [PATCH v2 4/6] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH v3 6/6] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH v3 5/6] iio: Comment that the LSM303D also has the Magnetometer DRDY
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH v3 3/6] iio: st_sensors: Add lsm303d support to the LSM9DS0 IMU driver
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH v3 4/6] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH v3 0/6] iio: st_sensors: Add lsm303d support
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH v3 1/6] iio: accel: st_accel: Add LSM303D
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH v3 2/6] iio: magnetometer: st_accel: Add LSM303D
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• Re: [PULL] IIO: 2nd set of features for the 6.4 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PULL] IIO: 2nd set of features for the 6.4 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/6] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/6] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: core: add IIO_VAL_INT_MICRO
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: adc: ad7192: Fix null pointer dereference on probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ad7192: Fix internal/external clock selection
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: accel: bma400: Simplify an error message
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 5/8] dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio:adc: add max14001 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings:iio:adc: add max14001 bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: tmag5273: Fix runtime PM leak on measurement error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings:iio:adc: add max14001 bindings
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings:iio:adc: add max14001 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH] iio: ad4130: Make sure clock provider gets removed
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 1/1] dt-bindings: iio: pressure: Support Honeywell mprls0025pa sensor
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 0/1] Support Honeywell mprls0025pa pressure sensor
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH 6/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 4/8] leds: qcom-lpg: Add support for PMI632 LPG
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation
  • From: Fabrizio Lamarque <fl.scratchpad@xxxxxxxxx>
• [PATCH 2/2] iio:adc: add max14001 support
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings:iio:adc: add max14001 bindings
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH v2] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
  • From: Masahiro Honda <honda@xxxxxxxxxxxxx>
• Re: [PATCH] iio: tmag5273: Fix runtime PM leak on measurement error
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: adi-axi-adc issues and how to properly support this designs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 6/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 5/8] dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: pressure: Support Honeywell mpr sensors
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: pressure: Support Honeywell mpr sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH] iio: tmag5273: Fix runtime PM leak on measurement error
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH] iio: tmag5273: Fix runtime PM leak on measurement error
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/8] leds: qcom-lpg: Add support for PMI632 LPG
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 6/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 3/8] dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 5/8] dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 7/8] arm64: dts: qcom: Add PMI632 PMIC
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 1/8] dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 4/8] leds: qcom-lpg: Add support for PMI632 LPG
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2] counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation
  • From: Fabrizio Lamarque <fl.scratchpad@xxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation
  • From: Fabrizio Lamarque <fl.scratchpad@xxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: Reset TIM_TISEL and TIM_SMCR to their default value
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation
  • From: Fabrizio Lamarque <fl.scratchpad@xxxxxxxxx>
• Re: [PATCH v4 8/9] iio: adc: palmas: add support for iio threshold events
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ad7192: Fix internal/external clock selection
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 1/3] iio: adc: ad7192: Fix null pointer dereference on probe
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH 3/3] iio: adc: ad7192: Clarify binding documentation
  • From: Fabrizio Lamarque <fl.scratchpad@xxxxxxxxx>
• [PATCH 2/3] iio: adc: ad7192: Fix internal/external clock selection
  • From: Fabrizio Lamarque <fl.scratchpad@xxxxxxxxx>
• [PATCH v2 1/3] iio: adc: ad7192: Fix null pointer dereference on probe
  • From: Fabrizio Lamarque <fl.scratchpad@xxxxxxxxx>
• [PATCH v2 0/3] iio: adc: ad7192: Functional fixes
  • From: Fabrizio Lamarque <fl.scratchpad@xxxxxxxxx>
• Re: [PATCH v2 6/6] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 01/11] dmaengine: Add API function dmaengine_prep_slave_dma_array()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: core: add IIO_VAL_INT_MICRO
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] Support for Avago APDS9306 Ambient Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v2 5/6] iio: Comment that the LSM303D also has the Magnetometer DRDY
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH v2 6/6] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH v2 0/6] iio: st_sensors: Add lsm303d support
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH v2 4/6] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH v2 3/6] iio: st_sensors: Add lsm303d support to the LSM9DS0 IMU driver
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH v2 2/6] iio: magnetometer: st_accel: Add LSM303D
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH v2 1/6] iio: accel: st_accel: Add LSM303D
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.14] iio: adc: palmas_gpadc: fix NULL dereference on rmmod
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 1/2] iio: adc: palmas_gpadc: fix NULL dereference on rmmod
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 1/3] iio: adc: palmas_gpadc: fix NULL dereference on rmmod
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 2/4] iio: adc: palmas_gpadc: fix NULL dereference on rmmod
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 4/8] iio: adc: palmas_gpadc: fix NULL dereference on rmmod
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 06/17] iio: adc: palmas_gpadc: fix NULL dereference on rmmod
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.2 06/20] iio: adc: palmas_gpadc: fix NULL dereference on rmmod
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] iio: Comment that the LSM303D also has the Magnetometer DRDY
  • From: mail@xxxxxxxxxxxxx
• [PATCH] iio: magnetometer: st_accel: Add LSM303D
  • From: mail@xxxxxxxxxxxxx
• [PATCH] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver
  • From: mail@xxxxxxxxxxxxx
• [PATCH] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer
  • From: mail@xxxxxxxxxxxxx
• [PATCH] iio: st_sensors: Add lsm303d support to the LSM9DS0 IMU driver
  • From: mail@xxxxxxxxxxxxx
• [PATCH] iio: st_sensors: Add lsm303d support
  • From: mail@xxxxxxxxxxxxx
• [PATCH] iio: accel: st_accel: Add LSM303D
  • From: mail@xxxxxxxxxxxxx
• Re: [RFC PATCH 0/2] Support for Avago APDS9306 Ambient Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: mt6370: Fix ibus and ibat scaling value of some specific vendor ID chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: core: add IIO_VAL_INT_MICRO
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/9] iio: adc: palmas_gpadc: add iio events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: palmas: Take probe fully device managed.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 01/11] dmaengine: Add API function dmaengine_prep_slave_dma_array()
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH] counter: stm32-timer-cnt: Reset TIM_TISEL and TIM_SMCR to their default value
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v7 3/5] iio: adc: max77541: Add ADI MAX77541 ADC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v7 4/5] dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH 3/3] iio: bu27034: Fix integration time units
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 2/3] iio: gts: fix units of available integration times
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 1/3] iio: core: add IIO_VAL_INT_MICRO
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 0/3] iio: Fix integration time units for iio-gts
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v7 3/5] iio: adc: max77541: Add ADI MAX77541 ADC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v7 1/5] dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• Re: [PATCH v7 4/5] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: adc: mt6370: Fix ibus and ibat scaling value of some specific vendor ID chips
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH v7 0/5] Add MAX77541/MAX77540 PMIC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v7 2/5] regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• RE: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: add documentation for iio_chan_info_enum
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH 1/2] dt-bindings: Document APDS9306 Light Sensor bindings
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PULL] IIO: 1st set of new device support, features and cleanup for 6.4
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] dt-bindings: Document APDS9306 Light Sensor bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH 0/2] Support for Avago APDS9306 Ambient Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] dt-bindings: Document APDS9306 Light Sensor bindings
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PULL] IIO: 1st set of new device support, features and cleanup for 6.4
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: lsm6dsx: Add ACPI mount matrix retrieval
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RESEND PATCH 5.15 v3 5/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [RESEND PATCH 5.10 v3 4/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [RESEND PATCH 5.4 v3 3/5] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [RESEND PATCH 4.19 v3 2/5] iio: counter: 104-quad-8: Fix race condition between FLAG and CNTR reads
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [RESEND PATCH 4.14 v3 1/5] iio: counter: 104-quad-8: Fix race condition between FLAG and CNTR reads
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v3 3/3] counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v3 3/3] counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] counter: 104-quad-8: Migrate to the regmap API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v3 3/3] counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] Support for Avago APDS9306 Ambient Light Sensor
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] dt-bindings: Document APDS9306 Light Sensor bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: ROHM BU27008 RGB sensor
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: add documentation for iio_chan_info_enum
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PULL] IIO fixes for 6.3 set 2
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 3/5] dt-bindings: thermal: Use generic ADC node name in examples
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: ROHM BU27008 RGB sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH 2/2] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [RFC PATCH 1/2] dt-bindings: Document APDS9306 Light Sensor bindings
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [RFC PATCH 0/2] Support for Avago APDS9306 Ambient Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v4 5/5] dt-bindings: iio: adc: Require generic `channel` name for channel nodes
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v4 4/5] dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v4 2/5] arm64: dts: qcom: Use labels with generic node names for ADC channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v4 3/5] dt-bindings: thermal: Use generic ADC node name in examples
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v4 0/5] dts: qcom: Use labels with generic node names for ADC channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v4 1/5] ARM: dts: qcom: Use labels with generic node names for ADC channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: lsm6dsx: Support SMO8B30 ACPI ID for LSM6DS3TR-C
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: imx93: fix a signedness bug in imx93_adc_read_raw()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] IIO fixes for 6.3 set 2
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: ROHM BU27008 RGB sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] counter: 104-quad-8: Migrate to the regmap API
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v3 1/3] counter: 104-quad-8: Utilize bitfield access macros
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v3 0/3] Refactor 104-quad-8 to match device operations
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v3 3/3] counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v3 2/3] counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH] counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: adi-axi-adc issues and how to properly support this designs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v2 0/3] Improve kernel docs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad4310: Replace devm_clk_register() with devm_clk_hw_register()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] doc: Make sysfs-bus-iio doc more exact
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 4/5] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3] iio: adc: mt6370: Fix ibus and ibat scaling value of some specific vendor ID chips
  • From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
• Re: [RESEND PATCH v2 0/3] Improve kernel docs
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: dac: mcp4922: add vdd-supply property
  • From: Michael Welling <mwelling@xxxxxxxx>
• Re: [PATCH] iio: ad4310: Replace devm_clk_register() with devm_clk_hw_register()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• RE: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: [PATCH v2 3/3] doc: Make sysfs-bus-iio doc more exact
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v4 9/9] iio: adc: palmas: don't alter event config on suspend/resume
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v4 8/9] iio: adc: palmas: add support for iio threshold events
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v4 7/9] iio: adc: palmas: always reset events on unload
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v4 6/9] iio: adc: palmas: move eventX_enable into palmas_adc_event
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v4 5/9] iio: adc: palmas: use iio_event_direction for threshold polarity
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v4 4/9] iio: adc: palmas: replace "wakeup" with "event"
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v4 3/9] iio: adc: palmas: remove adc_wakeupX_data
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v4 2/9] iio: adc: palmas: Take probe fully device managed.
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v4 1/9] iio: adc: palmas_gpadc: fix NULL dereference on rmmod
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v4 0/9] iio: adc: palmas_gpadc: add iio events
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v3 3/7] iio: adc: palmas: use iio_event_direction for threshold polarity
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v3 2/7] iio: adc: palmas: replace "wakeup" with "event"
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v3 1/7] iio: adc: palmas: remove adc_wakeupX_data
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• Re: [PATCH v3 6/7] iio: adc: palmas: add support for iio threshold events
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Honeywell mpr pressure sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 4/5] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: max597x: Add support for max597x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] ad7192 driver: fixed unexpected internal clock fallback when no mclk clock is defined.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] ad7192 driver: fix null pointer dereference in probe when populating adc input ranges
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] doc: Make sysfs-bus-iio doc more exact
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: add documentation for iio_chan_info_enum
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: Add some kerneldoc for channel types
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v2 0/3] Improve kernel docs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: tsl2772: fix reading proximity-diodes from device tree
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for TI OPT4001 light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: set varaiable max5522_channels storage-class-specifier to static
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Document TI OPT4001 light sensor bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: dac: mcp4922: get and enable vdd regulator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: dac: mcp4922: get and enable vdd regulator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: dac: mcp4922: add support for mcp48xx series chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: dac: mcp4922: add support for mcp48xx series chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: mt6370: Fix ibus and ibat scaling value of some specific vendor ID chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 7/7] iio: adc: palmas: don't alter event config on suspend/resume
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/7] iio: adc: palmas: add support for iio threshold events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/7] iio: adc: palmas: remove adc_wakeupX_data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/6] iio: addac: stx104: Fix race condition for stx104_write_raw()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/6] Migrate STX104 to the regmap API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: pressure: Support Honeywell mpr sensors
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: pressure: Support Honeywell mpr sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Honeywell mpr pressure sensor
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: iio: dac: add mcp4822
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 00/10] Remove acpi.h implicit include of of.h
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH v5 5/6] iio: addac: stx104: Migrate to the regmap API
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v5 3/6] iio: addac: stx104: Use define rather than hardcoded limit for write val
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v5 6/6] iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v5 4/6] iio: addac: stx104: Improve indentation in stx104_write_raw()
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v5 2/6] iio: addac: stx104: Fix race condition when converting analog-to-digital
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v5 1/6] iio: addac: stx104: Fix race condition for stx104_write_raw()
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v5 0/6] Migrate STX104 to the regmap API
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2 04/10] serial: 8250_tegra: Add explicit include for of.h
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH v2] iio: adc: mt6370: Fix ibus and ibat scaling value of some specific vendor ID chips
  • From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
• [PATCH v3 7/7] iio: adc: palmas: don't alter event config on suspend/resume
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v3 6/7] iio: adc: palmas: add support for iio threshold events
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v3 2/7] iio: adc: palmas: replace "wakeup" with "event"
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v3 5/7] iio: adc: palmas: always reset events on unload
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v3 4/7] iio: adc: palmas: move eventX_enable into palmas_adc_event
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v3 3/7] iio: adc: palmas: use iio_event_direction for threshold polarity
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v3 1/7] iio: adc: palmas: remove adc_wakeupX_data
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v2 08/10] tpm: atmel: Add explicit include for of.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 02/10] staging: iio: resolver: ad2s1210: Add explicit include for of.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 09/10] fpga: lattice-sysconfig-spi: Add explicit include for of.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 03/10] net: rfkill-gpio: Add explicit include for of.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 07/10] virtio-mmio: Add explicit include for of.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 01/10] iio: adc: ad7292: Add explicit include for of.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 04/10] serial: 8250_tegra: Add explicit include for of.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 10/10] ACPI: Replace irqdomain.h include with struct declarations
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 05/10] ata: pata_macio: Add explicit include of irqdomain.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 06/10] pata: ixp4xx: Add explicit include for of.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 00/10] Remove acpi.h implicit include of of.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 5/5] ACPI: Replace irqdomain.h include with struct declarations
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 5/5] ACPI: Replace irqdomain.h include with struct declarations
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 3/5] iio: addac: stx104: Improve indentation in stx104_write_raw()
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH 5/5] ACPI: Replace irqdomain.h include with struct declarations
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: dac: mcp4922: get and enable vdd regulator
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: dac: mcp4922: add support for mcp48xx series chips
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: iio: dac: add mcp4822
  • From: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>
• Re: [PATCH v15 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v15 5/6] MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v15 3/6] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: iio: dac: add mcp4822
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/4] iio: dac: mcp4922: add support for mcp48xx series chips
  • From: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>
• [PATCH 2/4] iio: dac: mcp4922: get and enable vdd regulator
  • From: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>
• [PATCH 1/4] dt-bindings: iio: dac: mcp4922: add vdd-supply property
  • From: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>
• [PATCH 3/4] dt-bindings: iio: dac: add mcp4822
  • From: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>
• [PATCH 0/4] Add MCP48XX bindings and driver support
  • From: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 5/5] iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/5] iio: addac: stx104: Improve indentation in stx104_write_raw()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: light: tsl2772: fix reading proximity-diodes from device tree
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Document TI OPT4001 light sensor bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v4 4/5] iio: addac: stx104: Migrate to the regmap API
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v4 5/5] iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v4 3/5] iio: addac: stx104: Improve indentation in stx104_write_raw()
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v4 0/5] Migrate STX104 to the regmap API
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v4 1/5] iio: addac: stx104: Fix race condition for stx104_write_raw()
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v4 2/5] iio: addac: stx104: Fix race condition when converting analog-to-digital
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• RE: [PATCH v6 2/5] regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: [PATCH v3 07/11] iio: core: Add new DMABUF interface infrastructure
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: light: tsl2772: fix reading proximity-diodes from device tree
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [RESEND PATCH v2 3/3] doc: Make sysfs-bus-iio doc more exact
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RESEND PATCH v2 2/3] iio: add documentation for iio_chan_info_enum
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RESEND PATCH v2 0/3] Improve kernel docs
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• ROHM BU27008 RGB sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH] iio: light: tsl2772: fix reading proximity-diodes from device tree
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH v2 1/7] iio: adc: palmas: remove adc_wakeupX_data
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [PATCH 2/2] iio: light: Add support for TI OPT4001 light sensor
  • From: Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@xxxxxxxx>
• [PATCH 0/2] Support for Texas Instruments OPT4001 Ambient Light Sensor
  • From: Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@xxxxxxxx>
• [PATCH 1/2] dt-bindings: Document TI OPT4001 light sensor bindings
  • From: Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@xxxxxxxx>
• Re: [PATCH v3 01/11] dmaengine: Add API function dmaengine_prep_slave_dma_array()
  • From: Christian König <christian.koenig@xxxxxxx>
• Re: [PATCH v3 07/11] iio: core: Add new DMABUF interface infrastructure
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: adc: ad7192: Change "shorted" channels to differential
  • From: Fabrizio Lamarque <fl.scratchpad@xxxxxxxxx>
• Re: [PATCH v3 07/11] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/11] iio: new DMABUF based API, v3
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 01/11] dmaengine: Add API function dmaengine_prep_slave_dma_array()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 07/11] iio: core: Add new DMABUF interface infrastructure
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/2] ad7192 driver: fixed unexpected internal clock fallback when no mclk clock is defined.
  • From: Fabrizio Lamarque <fl.scratchpad@xxxxxxxxx>
• Re: [PATCH] iio: light: tsl2772: fix reading proximity-diodes from device tree
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/2] ad7192 driver: fix null pointer dereference in probe when populating adc input ranges
  • From: Fabrizio Lamarque <fl.scratchpad@xxxxxxxxx>
• Re: [PATCH] iio: dac: set varaiable max5522_channels storage-class-specifier to static
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH] iio: dac: set varaiable max5522_channels storage-class-specifier to static
  • From: Tom Rix <trix@xxxxxxxxxx>
• [PATCH] iio: light: tsl2772: fix reading proximity-diodes from device tree
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH v3 11/11] Documentation: iio: Document high-speed DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: Creating a driver for MAX31827 temperature switch
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: accel: bmi088: Correctly compute the address of the struct spi_device
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 1/7] iio: adc: palmas: remove adc_wakeupX_data
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 11/11] Documentation: iio: Document high-speed DMABUF based API
  • From: Jonathan Corbet <corbet@xxxxxxx>
• [PATCH v3 11/11] Documentation: iio: Document high-speed DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 10/11] iio: buffer-dmaengine: Support new DMABUF based userspace API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 09/11] iio: buffer-dma: Enable support for DMABUFs
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 08/11] iio: buffer-dma: split iio_dma_buffer_fileio_free() function
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 07/11] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 06/11] iio: buffer-dmaengine: Enable write support
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 05/11] iio: buffer-dmaengine: Support specifying buffer direction
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 04/11] iio: buffer-dma: Enable buffer write support
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 03/11] iio: buffer-dma: Get rid of outgoing queue
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 02/11] dmaengine: dma-axi-dmac: Implement device_prep_slave_dma_array
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 01/11] dmaengine: Add API function dmaengine_prep_slave_dma_array()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 00/11] iio: new DMABUF based API, v3
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 21/22] arch: arm64: dts: qcom: pm8150: support SID greater that 9
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 00/22] arm64: dts: qcom: remove duplication in PMIC declarations
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 21/22] arch: arm64: dts: qcom: pm8150: support SID greater that 9
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 21/22] arch: arm64: dts: qcom: pm8150: support SID greater that 9
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• RE: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: [PATCH v2 00/22] arm64: dts: qcom: remove duplication in PMIC declarations
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 09/22] arm64: dts: qcom: pmk8350: allow overriding the label
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 00/22] arm64: dts: qcom: remove duplication in PMIC declarations
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 21/22] arch: arm64: dts: qcom: pm8150: support SID greater that 9
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 10/22] arm64: dts: qcom: pmk8350: use interrupts-extended for IRQ specification
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 09/22] arm64: dts: qcom: pmk8350: allow overriding the label
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 08/22] arm64: dts: qcom: pmk8350: rename PMK8350_SID to PMIC_SID
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 07/22] arm64: dts: qcom: pmk8350: port sdam_6 device from sc8280xp-pmics
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 04/22] arm64: dts: qcom: sc8280xp-pmics: correct interrupt routing for pm8280_2_temp_alarm
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 02/22] arm64: dts: qcom: pm8350b: fix thermal zone node name
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 03/22] arm64: dts: qcom: sc8280xp-pmics: use pmk8350 specifics for pon device
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 02/22] arm64: dts: qcom: pm8350b: fix thermal zone node name
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 01/22] arm64: dts: qcom: pm8350: fix thermal zone node name
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 02/22] arm64: dts: qcom: pm8350b: fix thermal zone node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Linux-stm32] [PATCH 3/3] iio: adc: stm32-adc: skip adc-channels setup if none is present
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v2 02/22] arm64: dts: qcom: pm8350b: fix thermal zone node name
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] staging: iio: resolver: ads1210: fix config mode
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 03/22] arm64: dts: qcom: sc8280xp-pmics: use pmk8350 specifics for pon device
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: Creating a driver for MAX31827 temperature switch
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Creating a driver for MAX31827 temperature switch
  • From: Armin Wolf <W_Armin@xxxxxx>
• Creating a driver for MAX31827 temperature switch
  • From: Daniel Matyas <daniel.matyas23@xxxxxxxxx>
• [PATCH v2] iio: accel: bmi088: Correctly compute the address of the struct spi_device
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] iio: accel: bmi088: Correctly compute the address of the struct spi_device
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: addac: stx104: Migrate to the regmap API
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: max597x: Add support for max597x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 6/7] iio: adc: palmas: add support for iio threshold events
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v2 7/7] iio: adc: palmas: don't alter event config on suspend/resume
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v2 5/7] iio: adc: palmas: always reset events on unload
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v2 4/7] iio: adc: palmas: move eventX_enable into palmas_adc_event
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v2 2/7] iio: adc: palmas: replace "wakeup" with "event"
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v2 3/7] iio: adc: palmas: use iio_event_direction for threshold polarity
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v2 1/7] iio: adc: palmas: remove adc_wakeupX_data
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• [PATCH v2 0/7] iio: adc: palmas_gpadc: add iio events
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: addac: stx104: Migrate to the regmap API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: palmas_gpadc: add support for iio threshold events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 09/22] arm64: dts: qcom: pmk8350: allow overriding the label
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 03/22] arm64: dts: qcom: sc8280xp-pmics: use pmk8350 specifics for pon device
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 03/22] arm64: dts: qcom: sc8280xp-pmics: use pmk8350 specifics for pon device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 02/22] arm64: dts: qcom: pm8350b: fix thermal zone node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 02/22] arm64: dts: qcom: pm8350b: fix thermal zone node name
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 03/22] arm64: dts: qcom: sc8280xp-pmics: use pmk8350 specifics for pon device
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 03/22] arm64: dts: qcom: sc8280xp-pmics: use pmk8350 specifics for pon device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 00/22] arm64: dts: qcom: remove duplication in PMIC declarations
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 21/22] arch: arm64: dts: qcom: pm8150: support SID greater that 9
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 20/22] arm64: dts: qcom: pm8150: convert to use dynamic SID/LABEL
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 09/22] arm64: dts: qcom: pmk8350: allow overriding the label
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 03/22] arm64: dts: qcom: sc8280xp-pmics: use pmk8350 specifics for pon device
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Honeywell mpr pressure sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 22/22] arm64: dts: qcom sa8540p-pmics: switch to pm8150.dtsi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 20/22] arm64: dts: qcom: pm8150: convert to use dynamic SID/LABEL
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 19/22] arm64: dts: qcom: sc8280xp*: use pmr735a.dtsi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 18/22] arm64: dts: qcom: sc8280xp*: use pm8350c.dtsi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 21/22] arch: arm64: dts: qcom: pm8150: support SID greater that 9
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 17/22] arm64: dts: qcom: pm8350c: use interrupts-extended for IRQ specification
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 14/22] arm64: dts: qcom: sc8280xp*: use pm8350.dtsi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 16/22] arm64: dts: qcom: pm8350c: allow overriding SID and label
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 13/22] arm64: dts: qcom: pm8350: use interrupts-extended for IRQ specification
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 15/22] arm64: dts: qcom: pm8350c: move thermal zone declaration to the top
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 11/22] arm64: dts: qcom: sc8280xp*: use pmk8350.dtsi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 12/22] arm64: dts: qcom: pm8350: allow overriding SID and label
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 07/22] arm64: dts: qcom: pmk8350: port sdam_6 device from sc8280xp-pmics
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 10/22] arm64: dts: qcom: pmk8350: use interrupts-extended for IRQ specification
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 08/22] arm64: dts: qcom: pmk8350: rename PMK8350_SID to PMIC_SID
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 09/22] arm64: dts: qcom: pmk8350: allow overriding the label
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 05/22] dt-bindings: iio: qcom,spmi-adc7-pmk8350.h: include sid into defines
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 06/22] arm64: dts: qcom: pmk8350: rename pon label
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 04/22] arm64: dts: qcom: sc8280xp-pmics: correct interrupt routing for pm8280_2_temp_alarm
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 03/22] arm64: dts: qcom: sc8280xp-pmics: use pmk8350 specifics for pon device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 02/22] arm64: dts: qcom: pm8350b: fix thermal zone node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 01/22] arm64: dts: qcom: pm8350: fix thermal zone node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 00/22] arm64: dts: qcom: remove duplication in PMIC declarations
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] MAINTAINERS: Add Honeywell mpr sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iio: tsl2772: remove unused prox_diode_mask variable
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: palmas_gpadc: remove palmas_adc_wakeup_property
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: palmas_gpadc: add support for iio threshold events
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Honeywell mpr pressure sensor
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: palmas_gpadc: add support for iio threshold events
  • From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
• Re: [PATCH v7 2/5] MAINTAINERS: Add IIO gain-time-scale helpers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Honeywell mpr pressure sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [Linux-stm32] [PATCH 1/3] iio: adc: stm32-adc: warn if dt uses legacy channel config
  • From: Sean Nyekjær <sean@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5755: Add missing fwnode_handle_put()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: pressure: Support Honeywell mpr sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: pressure: Support Honeywell mpr sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: st-sensors: Fix repeated text
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: iio: qcom,spmi-adc7-pmk8350.h: include sid into defines
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] iio: adc: at91-sama5d2_adc: fix an error code in at91_adc_allocate_trigger()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: iio: qcom,spmi-adc7-pmk8350.h: include sid into defines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7192: Change "shorted" channels to differential
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] ad7192 driver: fixed unexpected internal clock fallback when no mclk clock is defined.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] ad7192 driver: fix null pointer dereference in probe when populating adc input ranges
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: resolver: ads1210: fix config mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: addac: stx104: Migrate to the regmap API
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH] iio: tsl2772: remove unused prox_diode_mask variable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [Linux-stm32] [PATCH 1/3] iio: adc: stm32-adc: warn if dt uses legacy channel config
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: addac: stx104: Migrate to the regmap API
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: addac: stx104: Migrate to the regmap API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: addac: stx104: Migrate to the regmap API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: addac: stx104: Migrate to the regmap API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: max597x: Add support for max597x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1100: fix error code in probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Honeywell mpr pressure sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: pressure: Support Honeywell mpr sensors
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/3] Support Honeywell mpr pressure sensor
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/3] MAINTAINERS: Add Honeywell mpr sensor
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 2/3] iio: pressure: Honeywell mpr pressure sensor
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: pressure: Support Honeywell mpr sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 0/3] Support Honeywell mpr pressure sensor
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• adi-axi-adc issues and how to properly support this designs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v7 5/5] MAINTAINERS: Add ROHM BU27034
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 4/5] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 3/5] dt-bindings: iio: light: Support ROHM BU27034
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 2/5] MAINTAINERS: Add IIO gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 1/5] iio: light: Add gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 0/5] Support ROHM BU27034 ALS sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v6 2/7] iio: light: Add gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/2] ad7192 driver: fix null pointer dereference in probe when populating adc input ranges
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: adc: ad7192: Change "shorted" channels to differential
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 0/5] Remove acpi.h implicit include of of.h
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v6 6/7] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v6 3/7] kunit: Add kunit wrappers for (root) device creation
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH v6 2/7] iio: light: Add gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [Linux-stm32] [PATCH 1/3] iio: adc: stm32-adc: warn if dt uses legacy channel config
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: mt6370: Fix ibus and ibat scaling value of some specific vendor ID chips
  • From: Dan Carpenter <error27@xxxxxxxxx>
• [PATCH v15 5/6] MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v15 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v15 3/6] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7192: Change "shorted" channels to differential
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH] iio: adc: ad7192: Change "shorted" channels to differential
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] serial: 8250_tegra: Add explicit include for of.h
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: AD7192 driver mess
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/5] staging: iio: resolver: ad2s1210: Add explicit include for of.h
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: adc: ad7292: Add explicit include for of.h
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] ad7192 driver: fixed unexpected internal clock fallback when no mclk clock is defined.
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: iio: qcom,spmi-adc7-pmk8350.h: include sid into defines
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 0/5] Remove acpi.h implicit include of of.h
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] iio: adc: ad7292: Add explicit include for of.h
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• RE: [PATCH 0/5] Remove acpi.h implicit include of of.h
  • From: "Keller, Jacob E" <jacob.e.keller@xxxxxxxxx>
• Re: [PATCH 3/5] net: rfkill-gpio: Add explicit include for of.h
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ad7192 driver: fixed unexpected internal clock fallback when no mclk clock is defined.
  • From: Fabrizio Lamarque <fl.scratchpad@xxxxxxxxx>
• [PATCH 3/5] net: rfkill-gpio: Add explicit include for of.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/5] staging: iio: resolver: ad2s1210: Add explicit include for of.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 5/5] ACPI: Replace irqdomain.h include with struct declarations
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 4/5] serial: 8250_tegra: Add explicit include for of.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/5] iio: adc: ad7292: Add explicit include for of.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 0/5] Remove acpi.h implicit include of of.h
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH 2/2] ad7192 driver: fixed unexpected internal clock fallback when no mclk clock is defined.
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] ad7192 driver: fix null pointer dereference in probe when populating adc input ranges
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: use main pmk8350.dtsi for sc8280xp platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/6] arm64: dts: qcom: pm8350: include SID into labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• AD7192 driver mess
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: st-sensors: Fix repeated text
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: st-sensors: Fix repeated text
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: st-sensors: Fix repeated text
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH] iio: adc: at91-sama5d2_adc: fix an error code in at91_adc_allocate_trigger()
  • From: Dan Carpenter <error27@xxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: use main pmk8350.dtsi for sc8280xp platform
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/6] arm64: dts: qcom: pm8350: include SID into labels
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: use main pmk8350.dtsi for sc8280xp platform
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: use main pmk8350.dtsi for sc8280xp platform
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/6] arm64: dts: qcom: pmk8350: rename pon label
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: iio: qcom,spmi-adc7-pmk8350.h: include sid into defines
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 5/6] arm64: dts: qcom: sc8280xp*: use pm8350.dtsi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 6/6] arm64: dts: qcom: sc8280xp*: use pm8350c.dtsi and pmr735a.dtsi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 4/6] arm64: dts: qcom: pm8350: include SID into labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/6] arm64: dts: qcom: pmk8350: rename pon label
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/6] arm64: dts: qcom: use main pmk8350.dtsi for sc8280xp platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/6] dt-bindings: iio: qcom,spmi-adc7-pmk8350.h: include sid into defines
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/6] arm64: dts: qcom: sc8280xp: remove duplication in PMIC declarations
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• RE: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 3/7] kunit: Add kunit wrappers for (root) device creation
  • From: David Gow <davidgow@xxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 3/7] kunit: Add kunit wrappers for (root) device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/7] kunit: Add kunit wrappers for (root) device creation
  • From: David Gow <davidgow@xxxxxxxxxx>
• Re: [PULL] IIO fixes for 6.3 - set 1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
  • From: Masahiro Honda <honda@xxxxxxxxxxxxx>
• [PATCH v3 1/2] iio: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• RE: [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: [PATCH v6 6/7] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] ad7192 driver: fixed unexpected internal clock fallback when no mclk clock is defined.
  • From: Fabrizio Lamarque <fl.scratchpad@xxxxxxxxx>
• [PATCH 1/2] ad7192 driver: fix null pointer dereference in probe when populating adc input ranges
  • From: Fabrizio Lamarque <fl.scratchpad@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [PATCH] staging: iio: resolver: ads1210: fix config mode
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• Re: [PATCH] iio: tsl2772: remove unused prox_diode_mask variable
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/7] kunit: Add kunit wrappers for (root) device creation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 3/7] kunit: Add kunit wrappers for (root) device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH] iio: tsl2772: remove unused prox_diode_mask variable
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [PATCH v6 3/7] kunit: Add kunit wrappers for (root) device creation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: addac: stx104: Migrate to the regmap API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 0/7] Support ROHM BU27034 ALS sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 7/7] MAINTAINERS: Add ROHM BU27034
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 6/7] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 5/7] MAINTAINERS: Add IIO gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 4/7] iio: test: test gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 3/7] kunit: Add kunit wrappers for (root) device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 2/7] iio: light: Add gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 1/7] dt-bindings: iio: light: Support ROHM BU27034
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 0/7] Support ROHM BU27034 ALS sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH V2 4/8] dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH v2 2/3] counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 2/3] iio: adc: stm32-adc: skip adc-diff-channels setup if none is present
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 1/3] iio: adc: stm32-adc: warn if dt uses legacy channel config
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 3/3] iio: adc: stm32-adc: skip adc-channels setup if none is present
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
  • From: Masahiro Honda <honda@xxxxxxxxxxxxx>
• Re: [PATCH v5 7/8] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/8] iio: light: Add gain-time-scale helpers
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v3 1/2] iio: addac: stx104: Migrate to the regmap API
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v3 2/2] iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v3 0/2] Migrate STX104 to the regmap API
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2] iio: addac: stx104: Migrate to the regmap API
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PULL] IIO fixes for 6.3 - set 1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: palmas_gpadc: remove palmas_adc_wakeup_property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: palmas_gpadc: remove adc_wakeupX_data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: palmas_gpadc: add support for iio threshold events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: temperature: Add MCP9600 thermocouple EMF converter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 7/8] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mt6370: Fix ibus and ibat scaling value of some specific vendor ID chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: addac: stx104: Migrate to the regmap API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad4310: Replace devm_clk_register() with devm_clk_hw_register()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: ad4310: Replace devm_clk_register() with devm_clk_hw_register()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: max597x: Add support for max597x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: max597x: Add support for max597x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/4] serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/8] iio: light: Add gain-time-scale helpers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: accel: Add support for Kionix/ROHM KX132 accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: adding support for pac193x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: David Gow <davidgow@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: David Gow <davidgow@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mt6370: Fix ibus and ibat scaling value of some specific vendor ID chips
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/3] counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH] iio: adc: mt6370: Fix ibus and ibat scaling value of some specific vendor ID chips
  • From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v4] HID:hid-sensor-custom: Fix buffer overrun in device name
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH v2 2/3] counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: David Gow <davidgow@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: David Gow <davidgow@xxxxxxxxxx>
• Re: [PATCH v5 5/8] iio: test: test gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 3/3] counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2] iio: addac: stx104: Migrate to the regmap API
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v2 3/3] counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v2 2/3] counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v2 1/3] counter: 104-quad-8: Utilize bitfield access macros
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v2 0/3] Refactor 104-quad-8 to match device operations
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: max597x: Add support for max597x
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH v2 1/2] iio: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: temperature: Add MCP9600 thermocouple EMF converter
  • From: Andrew Hepp <andrew.hepp@xxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• [PATCH] iio: adc: ti-ads1100: fix error code in probe()
  • From: Dan Carpenter <error27@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: adding support for pac193x
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: max597x: Add support for max597x
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/2] iio: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5 0/8] Support ROHM BU27034 ALS sensor
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [bug report] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: David Gow <davidgow@xxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: max597x: Add support for max597x
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: max597x: Add support for max597x
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 1/2] iio: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] drivers: kunit: Generic helpers for test device creation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>