Re: [PATCH v3 2/3] iio: imu: mpu6050: add level shifter flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 27 Sep 2023 19:08:31 +0000
Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx> wrote:

> Hello,
> 
> looks good for me.
> 
> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@xxxxxxx>

Applied patches 1 and 2 to the togreg branch of iio.git which I will
initially push out as testing to let 0-day poke at it,

Thanks,

Jonathan

> 
> Thanks,
> JB
> 
> 
> From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> Sent: Wednesday, September 27, 2023 19:32
> To: jic23@xxxxxxxxxx <jic23@xxxxxxxxxx>; lars@xxxxxxxxxx <lars@xxxxxxxxxx>; robh+dt@xxxxxxxxxx <robh+dt@xxxxxxxxxx>; krzysztof.kozlowski+dt@xxxxxxxxxx <krzysztof.kozlowski+dt@xxxxxxxxxx>; conor+dt@xxxxxxxxxx <conor+dt@xxxxxxxxxx>; bcousson@xxxxxxxxxxxx <bcousson@xxxxxxxxxxxx>; tony@xxxxxxxxxxx <tony@xxxxxxxxxxx>; andreas@xxxxxxxxxxxx <andreas@xxxxxxxxxxxx>; chenhuiz@xxxxxxxx <chenhuiz@xxxxxxxx>; Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>; andy.shevchenko@xxxxxxxxx <andy.shevchenko@xxxxxxxxx>; linux-iio@xxxxxxxxxxxxxxx <linux-iio@xxxxxxxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx <devicetree@xxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx <linux-kernel@xxxxxxxxxxxxxxx>; linux-omap@xxxxxxxxxxxxxxx <linux-omap@xxxxxxxxxxxxxxx>
> Subject: [PATCH v3 2/3] iio: imu: mpu6050: add level shifter flag 
>  
> Some boards fail in magnetometer probe if level shifter flag is not set, definition was found in the vendor Linux kernel v3. 0. Signed-off-by: Andreas Kemnade <andreas@ kemnade. info> Reviewed-by: Andy Shevchenko <andy. shevchenko@ gmail. com> 
> ZjQcmQRYFpfptBannerStart
> This Message Is From an External Sender 
> This message came from outside your organization. 
>  
> ZjQcmQRYFpfptBannerEnd
> Some boards fail in magnetometer probe if level shifter flag is not set,
> definition was found in the vendor Linux kernel v3.0.
> 
> Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> ---
>  drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c  | 13 +++++++++++++
>  drivers/iio/imu/inv_mpu6050/inv_mpu_core.c |  3 +++
>  drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h  |  1 +
>  3 files changed, 17 insertions(+)
> 
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
> index 7327e5723f961..8a7f2911905af 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
> @@ -71,6 +71,19 @@ int inv_mpu_aux_init(const struct inv_mpu6050_state *st)
>  	unsigned int val;
>  	int ret;
>  
> +	/*
> +	 * Code based on the vendor Linux kernel v3.0,
> +	 * the exact meaning is unknown.
> +	 */
> +	if (st->chip_type == INV_MPU9150) {
> +		unsigned int mask = BIT(7);
> +
> +		val = st->level_shifter ? mask : 0;
> +		ret = regmap_update_bits(st->map, 0x1, mask, val);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	/* configure i2c master */
>  	val = INV_MPU6050_BITS_I2C_MST_CLK_400KHZ |
>  			INV_MPU6050_BIT_WAIT_FOR_ES;
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> index 29f906c884bd8..3fbeef1a70186 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> @@ -17,6 +17,7 @@
>  #include <linux/regulator/consumer.h>
>  #include <linux/pm.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/property.h>
>  
>  #include <linux/iio/common/inv_sensors_timestamp.h>
>  #include <linux/iio/iio.h>
> @@ -1495,6 +1496,8 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
>  	st->irq = irq;
>  	st->map = regmap;
>  
> +	st->level_shifter = device_property_read_bool(dev,
> +						      "invensense,level-shifter");
>  	pdata = dev_get_platdata(dev);
>  	if (!pdata) {
>  		result = iio_read_mount_matrix(dev, &st->orientation);
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> index ed5a96e78df05..7eba1439c8093 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> @@ -203,6 +203,7 @@ struct inv_mpu6050_state {
>  	s32 magn_raw_to_gauss[3];
>  	struct iio_mount_matrix magn_orient;
>  	unsigned int suspended_sensors;
> +	bool level_shifter;
>  	u8 *data;
>  };
>  





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux