The following changes since commit 0bb80ecc33a8fb5a682236443c1e740d5c917d1d: Linux 6.6-rc1 (2023-09-10 16:28:41 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-6.6a for you to fetch changes up to fd39d9668f2ce9f4b05ad55e8c8d80c098073e0b: iio: pressure: ms5611: ms5611_prom_is_valid false negative bug (2023-10-05 18:06:46 +0100) ---------------------------------------------------------------- 1st set of IIO fixes for 6.6 Note last minute rebase to fix up a stale Fixes tag. All patches have been in Linux-next for some time. adi,ad3552r - Fix swapped device IDs for the two parts that are supported. adi,ad7192 - Use the right reference voltage source. adi,ad7292 - Fix additionalProperties to be false, not true. adi,ad74413 - Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER adi,admv1013 - Fix up some corner cases for the mixer vgate register value. bosch,bmp280 - Fix a null pointer dereference caused by a wrong boolean operator. bosch,bno055 - Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER freescale,imx8eqxp - Fix some wrong register addresses. google,cros_ec - Fix a use after free if very badly timed buffer disable occurs by holding the device in buffered mode. infineon,dps310 - Expand a timeout so we don't hit it on working parts. meas,m5611 - Allow for a ROM CRC of 0 as it is a valid value and there are devices out there where it happens. murata,irsd200 - Make sure the buffer used to build up the scan is large enough to take the timestamp. rohm,bu27010 binding - Add a missing required vdd-supply vishay,vcnl4000 - Don't power down chip in wrong place. ---------------------------------------------------------------- Alexander Zangerl (1): iio: pressure: ms5611: ms5611_prom_is_valid false negative bug Alisa-Dariana Roman (1): iio: adc: ad7192: Correct reference voltage Antoniu Miclaus (2): iio: admv1013: add mixer_vgate corner cases iio: addac: Kconfig: update ad74413r selections GONG, Ruiqi (1): iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler Jonathan Cameron (1): iio: imu: bno055: Fix missing Kconfig dependencies Krzysztof Kozlowski (1): dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example Lakshmi Yadlapati (1): iio: pressure: dps310: Adjust Timeout Settings Marcelo Schmitt (1): iio: dac: ad3552r: Correct device IDs Mårten Lindahl (1): iio: light: vcnl4000: Don't power on/off chip in config Phil Elwell (1): iio: pressure: bmp280: Fix NULL pointer exception Philipp Rossak (1): iio: adc: imx8qxp: Fix address for command buffer registers Rob Herring (1): dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes Tzung-Bi Shih (1): iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data() .../devicetree/bindings/iio/adc/adi,ad7292.yaml | 2 +- .../bindings/iio/light/rohm,bu27010.yaml | 1 + drivers/iio/adc/ad7192.c | 29 +++++++++++++++++++--- drivers/iio/adc/imx8qxp-adc.c | 4 +-- drivers/iio/addac/Kconfig | 2 ++ .../common/cros_ec_sensors/cros_ec_sensors_core.c | 6 ++++- drivers/iio/dac/ad3552r.c | 4 +-- drivers/iio/frequency/admv1013.c | 4 +-- drivers/iio/imu/bno055/Kconfig | 2 ++ drivers/iio/light/vcnl4000.c | 1 - drivers/iio/pressure/bmp280-core.c | 2 +- drivers/iio/pressure/dps310.c | 8 +++--- drivers/iio/pressure/ms5611_core.c | 2 +- drivers/iio/proximity/irsd200.c | 6 ++--- 14 files changed, 51 insertions(+), 22 deletions(-)
