This patch will ensure compatibility with the new revision of the AD5758
dac converter. The modifications consist of removing the fault_prot_switch
function since this option is no longer available, and enabling the
ENABLE_PPC_BUFFERS bit in ADC_CONFIG register before setting the PPC
current mode.
Signed-off-by: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
---
drivers/iio/dac/ad5758.c | 55 +++++++++++++---------------------------
1 file changed, 18 insertions(+), 37 deletions(-)
diff --git a/drivers/iio/dac/ad5758.c b/drivers/iio/dac/ad5758.c
index 2bdf1b0aee06..a513c70faefa 100644
--- a/drivers/iio/dac/ad5758.c
+++ b/drivers/iio/dac/ad5758.c
@@ -72,8 +72,6 @@
#define AD5758_DCDC_CONFIG1_DCDC_VPROG_MODE(x) (((x) & 0x1F) << 0)
#define AD5758_DCDC_CONFIG1_DCDC_MODE_MSK GENMASK(6, 5)
#define AD5758_DCDC_CONFIG1_DCDC_MODE_MODE(x) (((x) & 0x3) << 5)
-#define AD5758_DCDC_CONFIG1_PROT_SW_EN_MSK BIT(7)
-#define AD5758_DCDC_CONFIG1_PROT_SW_EN_MODE(x) (((x) & 0x1) << 7)
/* AD5758_DCDC_CONFIG2 */
#define AD5758_DCDC_CONFIG2_ILIMIT_MSK GENMASK(3, 1)
@@ -84,6 +82,10 @@
/* AD5758_DIGITAL_DIAG_RESULTS */
#define AD5758_CAL_MEM_UNREFRESHED_MSK BIT(15)
+/* AD5758_ADC_CONFIG */
+#define AD5758_ADC_CONFIG_PPC_BUF_EN(x) (((x) & 0x1) << 11)
+#define AD5758_ADC_CONFIG_PPC_BUF_MSK BIT(11)
+
#define AD5758_WR_FLAG_MSK(x) (0x80 | ((x) & 0x1F))
#define AD5758_FULL_SCALE_MICRO 65535000000ULL
@@ -315,6 +317,18 @@ static int ad5758_set_dc_dc_conv_mode(struct ad5758_state *st,
{
int ret;
+ /*
+ * The ENABLE_PPC_BUFFERS bit must be set prior to enabling PPC current
+ * mode.
+ */
+ if (mode == AD5758_DCDC_MODE_PPC_CURRENT) {
+ ret = ad5758_spi_write_mask(st, AD5758_ADC_CONFIG,
+ AD5758_ADC_CONFIG_PPC_BUF_MSK,
+ AD5758_ADC_CONFIG_PPC_BUF_EN(1));
+ if (ret < 0)
+ return ret;
+ }
+
ret = ad5758_spi_write_mask(st, AD5758_DCDC_CONFIG1,
AD5758_DCDC_CONFIG1_DCDC_MODE_MSK,
AD5758_DCDC_CONFIG1_DCDC_MODE_MODE(mode));
@@ -444,23 +458,6 @@ static int ad5758_set_out_range(struct ad5758_state *st, int range)
AD5758_CAL_MEM_UNREFRESHED_MSK);
}
-static int ad5758_fault_prot_switch_en(struct ad5758_state *st, bool enable)
-{
- int ret;
-
- ret = ad5758_spi_write_mask(st, AD5758_DCDC_CONFIG1,
- AD5758_DCDC_CONFIG1_PROT_SW_EN_MSK,
- AD5758_DCDC_CONFIG1_PROT_SW_EN_MODE(enable));
- if (ret < 0)
- return ret;
- /*
- * Poll the BUSY_3WI bit in the DCDC_CONFIG2 register until it is 0.
- * This allows the 3-wire interface communication to complete.
- */
- return ad5758_wait_for_task_complete(st, AD5758_DCDC_CONFIG2,
- AD5758_DCDC_CONFIG2_BUSY_3WI_MSK);
-}
-
static int ad5758_internal_buffers_en(struct ad5758_state *st, bool enable)
{
int ret;
@@ -585,8 +582,8 @@ static ssize_t ad5758_write_powerdown(struct iio_dev *indio_dev,
{
struct ad5758_state *st = iio_priv(indio_dev);
bool pwr_down;
- unsigned int dcdc_config1_mode, dc_dc_mode, dac_config_mode, val;
- unsigned long int dcdc_config1_msk, dac_config_msk;
+ unsigned int dc_dc_mode, dac_config_mode, val;
+ unsigned long int dac_config_msk;
int ret;
ret = kstrtobool(buf, &pwr_down);
@@ -602,17 +599,6 @@ static ssize_t ad5758_write_powerdown(struct iio_dev *indio_dev,
val = 1;
}
- dcdc_config1_mode = AD5758_DCDC_CONFIG1_DCDC_MODE_MODE(dc_dc_mode) |
- AD5758_DCDC_CONFIG1_PROT_SW_EN_MODE(val);
- dcdc_config1_msk = AD5758_DCDC_CONFIG1_DCDC_MODE_MSK |
- AD5758_DCDC_CONFIG1_PROT_SW_EN_MSK;
-
- ret = ad5758_spi_write_mask(st, AD5758_DCDC_CONFIG1,
- dcdc_config1_msk,
- dcdc_config1_mode);
- if (ret < 0)
- goto err_unlock;
-
dac_config_mode = AD5758_DAC_CONFIG_OUT_EN_MODE(val) |
AD5758_DAC_CONFIG_INT_EN_MODE(val);
dac_config_msk = AD5758_DAC_CONFIG_OUT_EN_MSK |
@@ -841,11 +827,6 @@ static int ad5758_init(struct ad5758_state *st)
return ret;
}
- /* Enable the VIOUT fault protection switch (FPS is closed) */
- ret = ad5758_fault_prot_switch_en(st, 1);
- if (ret < 0)
- return ret;
-
/* Power up the DAC and internal (INT) amplifiers */
ret = ad5758_internal_buffers_en(st, 1);
if (ret < 0)
--
2.17.1
