Hi Jonathan,
On sam., mars 16 2019, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> On Fri, 15 Mar 2019 16:11:50 +0100
> Gregory CLEMENT <gregory.clement@xxxxxxxxxxx> wrote:
>
>> This adds device tree bindings for the TI ADS8344 A/DC chips.
>>
>> Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
> Looks good to me, though io-channel-cells only needs to be 1 if
> you have consumers... Otherwise, it shouldn't be there at all..
OK I will remove it then.
Thanks,
Gregory
>
> Jonathan
>
>> ---
>> .../bindings/iio/adc/ti-ads8344.txt | 21 +++++++++++++++++++
>> 1 file changed, 21 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
>> new file mode 100644
>> index 000000000000..6576c4fed7b7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
>> @@ -0,0 +1,21 @@
>> +* Texas Instruments ADS8344 A/DC chip
>> +
>> +Required properties:
>> + - compatible: Must be "ti,ads8344"
>> + - #io-channel-cells: Must be 1 as per ../iio-bindings.txt
>> + - reg: SPI chip select number for the device
>> + - vref-supply: phandle to a regulator node that supplies the
>> + reference voltage
>> +
>> +Recommended properties:
>> + - spi-max-frequency: Definition as per
>> + Documentation/devicetree/bindings/spi/spi-bus.txt
>> +
>> +Example:
>> +adc@0 {
>> + compatible = "ti,ads8344";
>> + reg = <0>;
>> + #io-channel-cells = <1>;
>> + vref-supply = <&refin_supply>;
>> + spi-max-frequency = <10000000>;
>> +};
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
