Re: [linux-sunxi] Re: [PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 19, 2019 at 8:37 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
>
> On Tue, Mar 19, 2019 at 12:30:25PM +0000, Måns Rullgård wrote:
> > Philipp Rossak <embed3d@xxxxxxxxx> writes:
> >
> > > Allwiner H3 and A83T SoCs have a thermal sensor, which is a large refactored
> > > version of the old Allwinner "GPADC" (although it have already only
> > > thermal part left in A33).
> > >
> > > This patch tried to add support for the sensor in H3 and A83T based on
> > >
> > > This Patchtseries was in the beginning based on Icenowy Zengs v4 patchseries [1]. Since we decided to merge the mfd driver into the GPADC this changed. So only one patch could be reused.
> > >
> > > Patches that adds support for H5, A64, A80 and H6 SoCs are allready prepared,
> > > and will be upstreamed if this patchseries is applied and the testing is done.
> > >
> > > Sorry for delaying this.
> > >
> > > Regards,
> > > Philipp
> > >
> > > changes since v2:
> > >     * mfd driver is now merged into the gpadc driver
> > >     * complete rework
> > >
> > > changes since v1:
> > >     * collecting all acks
> > >     * rewording commits/fix typos
> > >     * move code in place where it is used
> > >     * fix naming conventions of defines
> > >     * clarify commits
> > >     * update documentation to cover the new nvmem calibraion
> > >     * change nvmem calibration
> > >
> > > Icenowy Zheng (1):
> > >   iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain
> > >     A33
> > >
> > > Philipp Rossak (29):
> > >   mfd: Makefile: Remove build option for MFD:sun4i-gpadc
> > >   mfd: Kconfig: Remove MFD_SUN4I_GPADC config option
> > >   iio: adc: Remove ID table
> > >   iio: adc: Kconfig: Update Kconfig to new build options
> > >   iio: adc: move SUN4I_GPADC_CHANNEL define to header file
> > >   iio: adc: remove ofnode options
> > >   iio: adc: remove mfd_probe & sunwi_irq_init function
> > >   iio: adc: remove hwmon structure
> > >   iio: adc: Threat A33 as thermal sensor and remove non thermal sun4i
> > >     channel
> > >   iio: adc: rework irq and adc_channel handling
> > >   iio: adc: add new compatibles
> > >   mfd: Remove old mfd driver & Move sun4i-gpadc.h to iio/adc/
> > >   arm: config: Enable SUN4I_GPADC in defconfig
> > >   dt-bindings: update the Allwinner GPADC device tree binding for H3 &
> > >     A83T
> > >   iio: adc: sun4i-gpadc-iio: rework: readout temp_data
> > >   iio: adc: sun4i-gpadc-iio: rework: support clocks and reset
> > >   iio: adc: sun4i-gpadc-iio: rework: support multiple sensors
> > >   iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data
> > >   iio: adc: sun4i-gpadc-iio: rework: device specific suspend & resume
> > >   iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
> > >   iio: adc: sun4i-gpadc-iio: add support for A83T thermal sensor
> > >   ARM: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5
> > >   ARM: dts: sun8i: h3: add support for the thermal sensor in H3
> > >   ARM: dts: sun8i: h3: add thermal zone to H3
> > >   ARM: dts: sun8i: h3: enable H3 sid controller
> > >   ARM: dts: sun8i: h3: use calibration for ths
> > >   ARM: dts: sun8i: a83t: add support for the thermal sensor in A83T
> > >   ARM: dts: sun8i: a83t: add thermal zone to A83T
> > >   ARM: sun8i: a83t: full range OPP tables and CPUfreq
> > >
> > >  .../devicetree/bindings/iio/adc/sun4i-gpadc.txt    |  41 +-
> > >  arch/arm/boot/dts/sun8i-a83t.dtsi                  | 143 +++++
> > >  arch/arm/boot/dts/sun8i-h3.dtsi                    |  52 ++
> > >  arch/arm/boot/dts/sunxi-h3-h5.dtsi                 |  10 +
> > >  arch/arm/configs/sunxi_defconfig                   |   1 +
> > >  drivers/iio/adc/Kconfig                            |  11 +-
> > >  drivers/iio/adc/sun4i-gpadc-iio.c                  | 617 +++++++++++++--------
> > >  drivers/mfd/Kconfig                                |  17 -
> > >  drivers/mfd/Makefile                               |   1 -
> > >  drivers/mfd/sun4i-gpadc.c                          | 181 ------
> > >  include/linux/{mfd => iio/adc}/sun4i-gpadc.h       |  47 +-
> > >  11 files changed, 681 insertions(+), 440 deletions(-)
> > >  delete mode 100644 drivers/mfd/sun4i-gpadc.c
> > >  rename include/linux/{mfd => iio/adc}/sun4i-gpadc.h (72%)
> >
> > What became of these patches?  I can't seem to find any follow-ups.  Was
> > the approach abandoned in favour of something else?
>
> It didn't, I don't think we ever got any follow-up to that series so
> that's the main reason it's been held back.

IIRC it was blocked by a disagreement on how to handle the calibration data
in the SID. Hopefully this is now resolved.

ChenYu



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux