Hello, this is the third version of a small series adding the support for the Texas Instruments ADS8344 ADC chip. This chip has a 16-bit 8-Channel ADC and is access directly through SPI. I finally took time to address the last comments on the second version. Thanks! Gregory Changelog: v2->v3: - Add the reviewed-by tag from Rob on the binding - Fix the license inconsistency - Add a comment about the spinlock based on the exhaustive explanation given by Jonathan v1->v2: - Remove the mention to the #io-channel-cells in the first patch, as there is no consumer. - Remove scan_index and scan_type, they are not used. - Use defines for building the command and remove the comment. - Remove the goto and the label in the probe() function as the label was only use once. - Remove the "#ifdef CONFIG_OF", the driver already depends on OF. - Don't use of_match_ptr and rename ads8344_dt_id to ads8344_of_match. Gregory CLEMENT (2): dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips iio: adc: Add driver for the TI ADS8344 A/DC chips .../bindings/iio/adc/ti-ads8344.txt | 19 ++ drivers/iio/adc/Kconfig | 10 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ti-ads8344.c | 204 ++++++++++++++++++ 4 files changed, 234 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt create mode 100644 drivers/iio/adc/ti-ads8344.c -- 2.20.1
