On Sat, 16 Mar 2019 12:07:32 -0300 Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx> wrote: > Add an ABI documentation for the ad5933 driver. > > Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx> Some stray whitespace in here. I cleaned it up. Thanks, Jonathan > --- > .../sysfs-bus-iio-impedance-analyzer-ad5933 | 35 +++++++++++++++++++ > .../sysfs-bus-iio-impedance-analyzer-ad5933 | 30 ---------------- > 2 files changed, 35 insertions(+), 30 deletions(-) > create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933 > delete mode 100644 drivers/staging/iio/Documentation/sysfs-bus-iio-impedance-analyzer-ad5933 > > diff --git a/Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933 b/Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933 > new file mode 100644 > index 000000000000..a50aada68e1e > --- /dev/null > +++ b/Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933 > @@ -0,0 +1,35 @@ > +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_start > +Date: March 2019 > +KernelVersion: 3.1.0 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Frequency sweep start frequency in Hz. > + > +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_increment > +Date: March 2019 > +KernelVersion: 3.1.0 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Frequency increment in Hz (step size) between consecutive > + frequency points along the sweep. > + > +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_points > +Date: March 2019 > +KernelVersion: 3.1.0 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Number of frequency points (steps) in the frequency sweep. > + This value, in conjunction with the > + out_altvoltageY_frequency_start and the > + out_altvoltageY_frequency_increment, determines the frequency > + sweep range for the sweep operation. > + > +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_settling_cycles > +Date: March 2019 > +KernelVersion: 3.1.0 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Number of output excitation cycles (settling time cycles) > + that are allowed to pass through the unknown impedance, > + after each frequency increment, and before the ADC is triggered > + to perform a conversion sequence of the response signal. > diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-impedance-analyzer-ad5933 b/drivers/staging/iio/Documentation/sysfs-bus-iio-impedance-analyzer-ad5933 > deleted file mode 100644 > index 79c7e88c64cd..000000000000 > --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-impedance-analyzer-ad5933 > +++ /dev/null > @@ -1,30 +0,0 @@ > -What: /sys/bus/iio/devices/iio:deviceX/outY_freq_start > -KernelVersion: 3.1.0 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - Frequency sweep start frequency in Hz. > - > -What: /sys/bus/iio/devices/iio:deviceX/outY_freq_increment > -KernelVersion: 3.1.0 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - Frequency increment in Hz (step size) between consecutive > - frequency points along the sweep. > - > -What: /sys/bus/iio/devices/iio:deviceX/outY_freq_points > -KernelVersion: 3.1.0 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - Number of frequency points (steps) in the frequency sweep. > - This value, in conjunction with the outY_freq_start and the > - outY_freq_increment, determines the frequency sweep range > - for the sweep operation. > - > -What: /sys/bus/iio/devices/iio:deviceX/outY_settling_cycles > -KernelVersion: 3.1.0 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - Number of output excitation cycles (settling time cycles) > - that are allowed to pass through the unknown impedance, > - after each frequency increment, and before the ADC is triggered > - to perform a conversion sequence of the response signal.
