Add an ABI documentation for the ad5933 driver. Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx> --- .../sysfs-bus-iio-impedance-analyzer-ad5933 | 35 +++++++++++++++++++ .../sysfs-bus-iio-impedance-analyzer-ad5933 | 30 ---------------- 2 files changed, 35 insertions(+), 30 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933 delete mode 100644 drivers/staging/iio/Documentation/sysfs-bus-iio-impedance-analyzer-ad5933 diff --git a/Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933 b/Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933 new file mode 100644 index 000000000000..a50aada68e1e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933 @@ -0,0 +1,35 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_start +Date: March 2019 +KernelVersion: 3.1.0 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Frequency sweep start frequency in Hz. + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_increment +Date: March 2019 +KernelVersion: 3.1.0 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Frequency increment in Hz (step size) between consecutive + frequency points along the sweep. + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_points +Date: March 2019 +KernelVersion: 3.1.0 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Number of frequency points (steps) in the frequency sweep. + This value, in conjunction with the + out_altvoltageY_frequency_start and the + out_altvoltageY_frequency_increment, determines the frequency + sweep range for the sweep operation. + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_settling_cycles +Date: March 2019 +KernelVersion: 3.1.0 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Number of output excitation cycles (settling time cycles) + that are allowed to pass through the unknown impedance, + after each frequency increment, and before the ADC is triggered + to perform a conversion sequence of the response signal. diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-impedance-analyzer-ad5933 b/drivers/staging/iio/Documentation/sysfs-bus-iio-impedance-analyzer-ad5933 deleted file mode 100644 index 79c7e88c64cd..000000000000 --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-impedance-analyzer-ad5933 +++ /dev/null @@ -1,30 +0,0 @@ -What: /sys/bus/iio/devices/iio:deviceX/outY_freq_start -KernelVersion: 3.1.0 -Contact: linux-iio@xxxxxxxxxxxxxxx -Description: - Frequency sweep start frequency in Hz. - -What: /sys/bus/iio/devices/iio:deviceX/outY_freq_increment -KernelVersion: 3.1.0 -Contact: linux-iio@xxxxxxxxxxxxxxx -Description: - Frequency increment in Hz (step size) between consecutive - frequency points along the sweep. - -What: /sys/bus/iio/devices/iio:deviceX/outY_freq_points -KernelVersion: 3.1.0 -Contact: linux-iio@xxxxxxxxxxxxxxx -Description: - Number of frequency points (steps) in the frequency sweep. - This value, in conjunction with the outY_freq_start and the - outY_freq_increment, determines the frequency sweep range - for the sweep operation. - -What: /sys/bus/iio/devices/iio:deviceX/outY_settling_cycles -KernelVersion: 3.1.0 -Contact: linux-iio@xxxxxxxxxxxxxxx -Description: - Number of output excitation cycles (settling time cycles) - that are allowed to pass through the unknown impedance, - after each frequency increment, and before the ADC is triggered - to perform a conversion sequence of the response signal. -- 2.20.1
