On Fri, 15 Mar 2019 13:29:02 +0200
Mircea Caprioru <mircea.caprioru@xxxxxxxxxx> wrote:
> This patch replaces the platform data clock select member with DT clock
> binding. Through the DT the external clock binding is specified. If this is
> not provided then the device will use the internal clock source.
>
> With the external clock binding there is the option to use a clock or a
> crystal as the clock source. When an external crystal is used it is
> connected to MCLK1 and MCLK2 pins. If the external clock is used only MCLK2
> pin will be connected.
>
> Signed-off-by: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with it.
Note I reordered with earlier patch to avoid breaking bisectablity.
Thanks,
Jonathan
> ---
> drivers/staging/iio/adc/ad7192.c | 84 ++++++++++++++++++++++----------
> drivers/staging/iio/adc/ad7192.h | 2 -
> 2 files changed, 58 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
> index 27f962b8c4ef..5c54ce380fa5 100644
> --- a/drivers/staging/iio/adc/ad7192.c
> +++ b/drivers/staging/iio/adc/ad7192.c
> @@ -7,6 +7,7 @@
> */
>
> #include <linux/interrupt.h>
> +#include <linux/clk.h>
> #include <linux/device.h>
> #include <linux/kernel.h>
> #include <linux/slab.h>
> @@ -156,14 +157,16 @@
> struct ad7192_state {
> struct regulator *avdd;
> struct regulator *dvdd;
> + struct clk *mclk;
> u16 int_vref_mv;
> - u32 mclk;
> + u32 fclk;
> u32 f_order;
> u32 mode;
> u32 conf;
> u32 scale_avail[8][2];
> u8 gpocon;
> u8 devid;
> + u8 clock_sel;
> struct mutex lock; /* protect sensor state */
>
> struct ad_sigma_delta sd;
> @@ -226,6 +229,27 @@ static inline bool ad7192_valid_external_frequency(u32 freq)
> freq <= AD7192_EXT_FREQ_MHZ_MAX);
> }
>
> +static int ad7192_of_clock_select(struct ad7192_state *st)
> +{
> + struct device_node *np = st->sd.spi->dev.of_node;
> + unsigned int clock_sel;
> +
> + clock_sel = AD7192_CLK_INT;
> +
> + /* use internal clock */
> + if (PTR_ERR(st->mclk) == -ENOENT) {
> + if (of_property_read_bool(np, "adi,int-clock-output-enable"))
> + clock_sel = AD7192_CLK_INT_CO;
> + } else {
> + if (of_property_read_bool(np, "adi,clock-xtal"))
> + clock_sel = AD7192_CLK_EXT_MCLK1_2;
> + else
> + clock_sel = AD7192_CLK_EXT_MCLK2;
> + }
> +
> + return clock_sel;
> +}
> +
> static int ad7192_setup(struct ad7192_state *st,
> const struct ad7192_platform_data *pdata)
> {
> @@ -250,28 +274,8 @@ static int ad7192_setup(struct ad7192_state *st,
> dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n",
> id);
>
> - switch (pdata->clock_source_sel) {
> - case AD7192_CLK_INT:
> - case AD7192_CLK_INT_CO:
> - st->mclk = AD7192_INT_FREQ_MHZ;
> - break;
> - case AD7192_CLK_EXT_MCLK1_2:
> - case AD7192_CLK_EXT_MCLK2:
> - if (ad7192_valid_external_frequency(pdata->ext_clk_hz)) {
> - st->mclk = pdata->ext_clk_hz;
> - break;
> - }
> - dev_err(&st->sd.spi->dev, "Invalid frequency setting %u\n",
> - pdata->ext_clk_hz);
> - ret = -EINVAL;
> - goto out;
> - default:
> - ret = -EINVAL;
> - goto out;
> - }
> -
> st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) |
> - AD7192_MODE_CLKSRC(pdata->clock_source_sel) |
> + AD7192_MODE_CLKSRC(st->clock_sel) |
> AD7192_MODE_RATE(480);
>
> st->conf = AD7192_CONF_GAIN(0);
> @@ -496,7 +500,7 @@ static int ad7192_read_raw(struct iio_dev *indio_dev,
> *val -= 273 * ad7192_get_temp_scale(unipolar);
> return IIO_VAL_INT;
> case IIO_CHAN_INFO_SAMP_FREQ:
> - *val = st->mclk /
> + *val = st->fclk /
> (st->f_order * 1024 * AD7192_MODE_RATE(st->mode));
> return IIO_VAL_INT;
> }
> @@ -543,7 +547,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev,
> break;
> }
>
> - div = st->mclk / (val * st->f_order * 1024);
> + div = st->fclk / (val * st->f_order * 1024);
> if (div < 1 || div > 1023) {
> ret = -EINVAL;
> break;
> @@ -706,15 +710,42 @@ static int ad7192_probe(struct spi_device *spi)
> if (ret)
> goto error_disable_dvdd;
>
> + st->fclk = AD7192_INT_FREQ_MHZ;
> +
> + st->mclk = devm_clk_get(&st->sd.spi->dev, "mclk");
> + if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) {
> + ret = PTR_ERR(st->mclk);
> + goto error_remove_trigger;
> + }
> +
> + st->clock_sel = ad7192_of_clock_select(st);
> +
> + if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
> + st->clock_sel == AD7192_CLK_EXT_MCLK2) {
> + ret = clk_prepare_enable(st->mclk);
> + if (ret < 0)
> + goto error_remove_trigger;
> +
> + st->fclk = clk_get_rate(st->mclk);
> + if (!ad7192_valid_external_frequency(st->fclk)) {
> + ret = -EINVAL;
> + dev_err(&spi->dev,
> + "External clock frequency out of bounds\n");
> + goto error_disable_clk;
> + }
> + }
> +
> ret = ad7192_setup(st, pdata);
> if (ret)
> - goto error_remove_trigger;
> + goto error_disable_clk;
>
> ret = iio_device_register(indio_dev);
> if (ret < 0)
> - goto error_remove_trigger;
> + goto error_disable_clk;
> return 0;
>
> +error_disable_clk:
> + clk_disable_unprepare(st->mclk);
> error_remove_trigger:
> ad_sd_cleanup_buffer_and_trigger(indio_dev);
> error_disable_dvdd:
> @@ -731,6 +762,7 @@ static int ad7192_remove(struct spi_device *spi)
> struct ad7192_state *st = iio_priv(indio_dev);
>
> iio_device_unregister(indio_dev);
> + clk_disable_unprepare(st->mclk);
> ad_sd_cleanup_buffer_and_trigger(indio_dev);
>
> regulator_disable(st->dvdd);
> diff --git a/drivers/staging/iio/adc/ad7192.h b/drivers/staging/iio/adc/ad7192.h
> index 7433a43c2611..3be3ee269ed5 100644
> --- a/drivers/staging/iio/adc/ad7192.h
> +++ b/drivers/staging/iio/adc/ad7192.h
> @@ -33,8 +33,6 @@
>
> struct ad7192_platform_data {
> u16 vref_mv;
> - u8 clock_source_sel;
> - u32 ext_clk_hz;
> bool refin2_en;
> bool rej60_en;
> bool sinc3_en;
