Linux IIO Development

• Thread Index

• Re: [PATCH v2 3/3] iio: adc: new driver to support Linear technology's ltc2496
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc: ltc2497: split protocol independent part in a separate module
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc: ltc2497: split protocol independent part in a separate module
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/3] iio: adc: add support for ltc2496
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: adc: Add dt-schema for AD7292
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: temperature: ltc2983: fix u32 read into a unsigned long long
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 -next] iio: st_accel: Fix unused variable warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v2 8/9] RFC/RFT: iio: maxim_thermocouple: add thermocouple_type sysfs attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v2 7/9] iio: max31856: add support for runtime-configuring the thermocouple type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v2 6/9] Documentation: ABI: document IIO thermocouple_type file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v2 4/9] RFC: iio: core: add char type for sysfs attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v2 1/9] iio: max31856: add option for setting mains filter rejection frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: add support for AD5940
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: add support for AD5940
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: add driver support for AD5940
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 01/17] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 14/18] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 13/18] iio: expose iio_device_set_clock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 09/18] platform: chrome: sensorhub: Add FIFO support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 02/18] platform: cros_ec: Add cros_ec_sensor_hub driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: add parallax ping sensors
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH 2/2] iio: imu: inv_mpu6050: add support of MPU9150 magnetometer
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 0/2] Add MPU9150 magnetometer support
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 1/2] iio: imu: inv_mpu6050: delete not existing MPU9150 spi support
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v5 3/4] dt-binding: iio: Add documentation for AD7091R5
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v5 2/4] iio: adc: ad7091r5: Add scale and external VREF support
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v5 1/4] iio: adc: Add support for AD7091R5 ADC
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v5 4/4] MAINTAINERS: add entry for AD7091R5 driver
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PATCH v4 2/4] iio: adc: ad7091r5: Add scale and external VREF support
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH v4 4/4] MAINTAINERS: add entry for AD7091R5 driver
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v4 3/4] dt-binding: iio: Add documentation for AD7091R5
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v4 2/4] iio: adc: ad7091r5: Add scale and external VREF support
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v4 1/4] iio: adc: Add support for AD7091R5 ADC
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v5 05/18] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 04/18] platform: chrome: cros-ec: record event timestamp in the hard irq
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 06/18] platform: chrome: cros_ec: handle MKBP more events flag
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 08/18] Revert "Input: cros_ec_keyb: mask out extra flags in event_type"
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 12/18] iio: cros_ec: Move function description to .c file
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 11/18] platform: chrome: sensorhub: Add median filter
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 15/18] iio: cros_ec: Remove pm function
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 14/18] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 18/18] iio: cros_ec: Use Hertz as unit for sampling frequency
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 16/18] iio: cros_ec: Expose hwfifo_timeout
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 17/18] iio: cros_ec: Report hwfifo_watermark_max
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 13/18] iio: expose iio_device_set_clock
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 09/18] platform: chrome: sensorhub: Add FIFO support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 10/18] platform: chrome: sensorhub: Add code to spread timestmap
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 07/18] Revert "Input: cros_ec_keyb - add back missing mask for event_type"
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 03/18] platform/mfd:iio: cros_ec: Register sensor through sensorhub
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 02/18] platform: cros_ec: Add cros_ec_sensor_hub driver
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 01/18] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 00/18] cros_ec: Add sensorhub driver and FIFO processing
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 4/4] MAINTAINERS: add maintainer for ping iio sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 3/4] iio: ping: add parallax ping sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: add parallax ping sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: add vendor prefix parallax
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 0/4] iio: add driver for ping))) and laserping sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• RE: [PATCH 1/3] iio: pressure: Add driver for DLH pressure sensors
  • From: "Denis, Tomislav AVL DiTEST" <Tomislav.Denis@xxxxxxx>
• Re: [v2 9/9] dt-bindings: iio: maxim_thermocouple: document new 'compatible' strings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 13/17] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: mfd: Convert stm32 timers bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: add support for AD5940
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH 1/3] iio: pressure: Add driver for DLH pressure sensors
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 3/3] bindings: iio: pressure: Add dlh-i2c documentation
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: add driver support for AD5940
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: add support for AD5940
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: add support for AD5940
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [RFC PATCH v2 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] iio: adc: ltc2497: split protocol independent part in a separate module
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] iio: adc: add support for ltc2496
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] iio: adc: new driver to support Linear technology's ltc2496
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 3/3] bindings: iio: pressure: Add dlh-i2c documentation
  • From: <tomislav.denis@xxxxxxx>
• [PATCH 2/3] dt-bindings: Add asc vendor
  • From: <tomislav.denis@xxxxxxx>
• [PATCH 0/3] Add support for DLH pressure sensors
  • From: <tomislav.denis@xxxxxxx>
• [PATCH 1/3] iio: pressure: Add driver for DLH pressure sensors
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v3] dt-bindings: mfd: Convert stm32 timers bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH] iio: adc: ad7124: Enable internal reference
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Fix too short conversion time delay
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Make enum relations more future proof
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH] iio: buffer-dmaengine: Use dma_request_chan() directly for channel request
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: mfd: Convert stm32 timers bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/4] dt-binding: iio: Add documentation for AD7091R5
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: add support for AD5940
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v4 09/17] platform: chrome: sensorhub: Add FIFO support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v4 05/17] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: Add ADM1177 Hot Swap Controller and Digital Power Monitor driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Fix too short conversion time delay
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Fix too short conversion time delay
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: adc: Add dt-schema for AD7292
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: adc: Add dt-schema for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: add vendor prefix parallax
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: add parallax ping sensors
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PULL] 3rd set of new device support, cleanups etc for IIO in the 5.5 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] iio: ping: add parallax ping sensors
  • From: Michal Vokáč <michal.vokac@xxxxxxxxx>
• [PATCH] iio: adc: max9611: Make enum relations more future proof
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Fix too short conversion time delay
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v3 1/3] i2c: use void pointers for supplying data for reads and writes
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Fix too short conversion time delay
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Defer probe on POR read
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Fix too short conversion time delay
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• [PATCH] iio: buffer-dmaengine: Use dma_request_chan() directly for channel request
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] iio: adc: max9611: Fix too short conversion time delay
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH] iio: dac: ad7303: use regulator get optional to check for ext supply
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• RE: [PATCH 1/3] iio: Add ADM1177 Hot Swap Controller and Digital Power Monitor driver
  • From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
• [PATCH v3 1/3] i2c: use void pointers for supplying data for reads and writes
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v3 0/3] Use void pointers instead of char in I2C transfer APIs
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: adc: Add dt-schema for AD7292
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] i2c: use void pointers for supplying data for reads and writes
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 1/3] iio: Add ADM1177 Hot Swap Controller and Digital Power Monitor driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: Add ADM1177 Hot Swap Controller and Digital Power Monitor driver
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• [PATCH 3/3] MAINTAINERS: add entry for ADM1177 driver
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 2/3] dt-binding: iio: Add documentation for ADM1177
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 1/3] iio: Add ADM1177 Hot Swap Controller and Digital Power Monitor driver
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: ad7949: fix channels mixups
  • From: Couret Charles-Antoine <charles-antoine.couret@xxxxxxxxxxxxx>
• Re: Testing branch lacking fix patch
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Testing branch lacking fix patch
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2] i2c: use void pointers for supplying data for reads and writes
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2] i2c: use void pointers for supplying data for reads and writes
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: new driver to support Linear technology's ltc2496
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ltc2497: split channel definition in a separate module
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 1/1] counter: cros_ec: Add synchronization sensor
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2] i2c: use void pointers for supplying data for reads and writes
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [v2 3/9] iio: max31856: add support for configuring the HW averaging
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [v2 1/9] iio: max31856: add option for setting mains filter rejection frequency
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH 3/3] iio: adc: new driver to support Linear technology's ltc2496
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/3] iio: adc: ltc2497: split channel definition in a separate module
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PULL] 3rd set of new device support, cleanups etc for IIO in the 5.5 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 3rd set of new device support, cleanups etc for IIO in the 5.5 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 08/17] Revert "Input: cros_ec_keyb: mask out extra flags in event_type"
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4 07/17] Revert "Input: cros_ec_keyb - add back missing mask for event_type"
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [v2 9/9] dt-bindings: iio: maxim_thermocouple: document new 'compatible' strings
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v2 8/9] RFC/RFT: iio: maxim_thermocouple: add thermocouple_type sysfs attribute
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v2 7/9] iio: max31856: add support for runtime-configuring the thermocouple type
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v2 6/9] Documentation: ABI: document IIO thermocouple_type file
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v2 5/9] iio: core: add thermocouple_type standard attribute
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v2 4/9] RFC: iio: core: add char type for sysfs attributes
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v2 3/9] iio: max31856: add support for configuring the HW averaging
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v2 2/9] Documentation: ABI: document IIO in_temp_filter_notch_center_frequency file
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v2 1/9] iio: max31856: add option for setting mains filter rejection frequency
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v2 0/9] iio: max31856: provide more configuration options
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH v4 02/17] platform: cros_ec: Add cros_ec_sensor_hub driver
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/1] counter: cros_ec: Add synchronization sensor
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v4 01/17] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 03/17] platform/mfd:iio: cros_ec: Register sensor through sensorhub
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 14/17] iio: cros_ec: Remove pm function
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v4 12/17] iio: cros_ec: Move function description to .c file
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v4 06/17] platform: chrome: cros_ec: handle MKBP more events flag
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v4 05/17] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v4 04/17] platform: chrome: cros-ec: record event timestamp in the hard irq
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v4 03/17] platform/mfd:iio: cros_ec: Register sensor through sensorhub
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v4 02/17] platform: cros_ec: Add cros_ec_sensor_hub driver
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH] iio:adc:ti-adc084s021: Endian casting tidy ups.
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v4 08/17] Revert "Input: cros_ec_keyb: mask out extra flags in event_type"
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v4 07/17] Revert "Input: cros_ec_keyb - add back missing mask for event_type"
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v2 -next] iio: st_accel: Fix unused variable warning
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Defer probe on POR read
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: ad7280: Add spaces around math operator
  • From: Pedro Ortega <portega.kernel@xxxxxxx>
• Re: [PATCH] iio: adc: max9611: Defer probe on POR read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] tools: iio: Correctly add make dependency for iio_utils
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: add ping sensors to kernel configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: ping: add parallax ping sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: add parallax ping sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: add driver support for AD5940
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: add support for AD5940
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: Add driver support for AD7292
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: adc: Add dt-schema for AD7292
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: mfd: Convert stm32 timers bindings to json-schema
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: adc: ad7091r5: Add scale and external VREF support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: adc: Add support for AD7091R5 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: mpu6050: Add support for vdd-supply regulator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imo: mpu6050: add vdd-supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imo: mpu6050: add vdd-supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: cros_ec_baro: set info_mask_shared_by_all_available field
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5446: Add support for new AD5600 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] counter: cros_ec: Add synchronization sensor
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] staging: iio: adc: ad7280: Add spaces around math operator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 17/17] iio: cros_ec: Use Hertz as unit for sampling frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 16/17] iio: cros_ec: Report hwfifo_watermark_max
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 15/17] iio: cros_ec: Expose hwfifo_timeout
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 14/17] iio: cros_ec: Remove pm function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 13/17] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 12/17] iio: cros_ec: Move function description to .c file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 11/17] platform: chrome: sensorhub: Add median filter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 10/17] platform: chrome: sensorhub: Add code to spread timestmap
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 09/17] platform: chrome: sensorhub: Add FIFO support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 04/17] platform: chrome: cros-ec: record event timestamp in the hard irq
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 06/17] platform: chrome: cros_ec: handle MKBP more events flag
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 05/17] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 03/17] platform/mfd:iio: cros_ec: Register sensor through sensorhub
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 02/17] platform: cros_ec: Add cros_ec_sensor_hub driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: temperature: ltc2983: fix u32 read into a unsigned long long
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: dac: Migrate LTC1660 documentation to yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7606: fix reading unnecessary data from device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/3] iio: documentation: light: Add veml6030 sysfs documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/3] iio: light: add driver for veml6030 ambient light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/3] dt-bindings: iio: light: add veml6030 ALS bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: st_lsm6dsx: express odr in mHZ
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: st_lsm6dsx: express odr in mHZ
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] staging: iio: adc: ad7280: Add spaces around math operator
  • From: Pedro Ortega <portega.kernel@xxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: st_lsm6dsx: express odr in mHZ
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: imu: st_lsm6dsx: explicitly define odr table size
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: timer: Convert stm32 IIO trigger bindings to json-schema
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: stm32: allow to tune analog clock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: stm32-adc: add max clock rate property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: vf610: Use devm_platform_ioremap_resource
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: lpc18xx: Use devm_platform_ioremap_resource
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: vf610: use devm_platform_ioremap_resource
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: spear_adc: Use devm_platform_ioremap_resource
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: rcar-gyroadc: use devm_platform_ioremap_resource
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: npcm: use devm_platform_ioremap_resource
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: lpc18xx: use devm_platform_ioremap_resource
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ingenic: Use devm_platform_ioremap_resource
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: cc10001: use devm_platform_ioremap_resource
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: bcm_iproc_adc: drop a stray semicolon
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mt6577_auxdac: use devm_platform_ioremap_resource
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: aspeed: use devm_platform_ioremap_resource
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:adc:ti-adc084s021: Endian casting tidy ups.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: ad7949: fix channels mixups
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: core: Fix fractional format generation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] iio: st_accel: Fix unused variable warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 01/17] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• [PATCH v4 2/2] iio: adc: Add driver support for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: adc: Add dt-schema for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v4 0/2] iio: adc: Add support for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH 3/3] MAINTAINERS: add maintainer for AD5940
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH 2/3] iio: adc: add driver support for AD5940
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: adc: add support for AD5940
  • From: Song Qiang <songqiang1304521@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imo: mpu6050: add vdd-supply
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.9 02/64] iio: dac: mcp4922: fix error handling in mcp4922_write_raw
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 01/44] iio: dac: mcp4922: fix error handling in mcp4922_write_raw
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 004/103] iio: dac: mcp4922: fix error handling in mcp4922_write_raw
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 001/103] iio: adc: max9611: explicitly cast gain_selectors
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 004/205] iio: dac: mcp4922: fix error handling in mcp4922_write_raw
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 001/205] iio: adc: max9611: explicitly cast gain_selectors
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: adc: Add support for AD7091R5 ADC
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: dac: Migrate LTC1660 documentation to yaml
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3] dt-bindings: iio: dac: Migrate LTC1660 documentation to yaml
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v2] dt-bindings: mfd: Convert stm32 timers bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH v2 2/2] iio: imu: mpu6050: Add support for vdd-supply regulator
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: imo: mpu6050: add vdd-supply
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: mpu6050: Add support for vdd-supply regulator
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add driver support for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v3 4/4] MAINTAINERS: add entry for AD7091R5 driver
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v3 2/4] iio: adc: ad7091r5: Add scale and external VREF support
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v3 3/4] dt-binding: iio: Add documentation for AD7091R5
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v3 1/4] iio: adc: Add support for AD7091R5 ADC
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: imo: mpu6050: add vdd-supply
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: core: Fix fractional format generation
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: mpu6050: Add support for vdd-supply regulator
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH 5/5] MAINTAINERS: add maintainer for ping iio sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: add vendor prefix parallax
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 4/5] iio: add ping sensors to kernel configuration
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 3/5] iio: ping: add parallax ping sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 2/5] dt-bindings: add parallax ping sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 0/5] iio: add driver for ping))) and laserping sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: dac: Migrate LTC1660 documentation to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: timer: Convert stm32 IIO trigger bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: mfd: Convert stm32 timers bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: mpu6050: Add support for vdd-supply regulator
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v4 09/17] platform: chrome: sensorhub: Add FIFO support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: mpu6050: Add support for vdd-supply regulator
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: counter: Convert stm32 counter bindings to json-schema
  • From: Benjamin GAIGNARD <benjamin.gaignard@xxxxxx>
• Re: [PATCH 4/4] dt-bindings: mfd: Convert stm32 timers bindings to json-schema
  • From: Benjamin GAIGNARD <benjamin.gaignard@xxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: timer: Convert stm32 IIO trigger bindings to json-schema
  • From: Benjamin GAIGNARD <benjamin.gaignard@xxxxxx>
• [PATCH 1/2] dt-bindings: iio: imo: mpu6050: add vdd-supply
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 2/2] iio: imu: mpu6050: Add support for vdd-supply regulator
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2] iio: cros_ec_baro: set info_mask_shared_by_all_available field
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH] iio: cros_ec_baro: set info_mask_shared_by_all_available field
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] iio: temperature: ltc2983: fix u32 read into a unsigned long long
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• [PATCH v2] dt-bindings: iio: dac: Migrate LTC1660 documentation to yaml
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v2] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH] iio: dac: ad5446: Add support for new AD5600 DAC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: counter: Convert stm32 counter bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: mfd: Convert stm32 timers bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: counter: Convert stm32 counter bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: timer: Convert stm32 IIO trigger bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: stm32-adc: add max clock rate property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v4 04/17] platform: chrome: cros-ec: record event timestamp in the hard irq
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 03/17] platform/mfd:iio: cros_ec: Register sensor through sensorhub
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 06/17] platform: chrome: cros_ec: handle MKBP more events flag
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 07/17] Revert "Input: cros_ec_keyb - add back missing mask for event_type"
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 08/17] Revert "Input: cros_ec_keyb: mask out extra flags in event_type"
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 13/17] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 14/17] iio: cros_ec: Remove pm function
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 17/17] iio: cros_ec: Use Hertz as unit for sampling frequency
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 16/17] iio: cros_ec: Report hwfifo_watermark_max
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 15/17] iio: cros_ec: Expose hwfifo_timeout
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 11/17] platform: chrome: sensorhub: Add median filter
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 12/17] iio: cros_ec: Move function description to .c file
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 10/17] platform: chrome: sensorhub: Add code to spread timestmap
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 09/17] platform: chrome: sensorhub: Add FIFO support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 05/17] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 02/17] platform: cros_ec: Add cros_ec_sensor_hub driver
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 01/17] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 00/17] cros_ec: Add sensorhub driver and FIFO processing
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: Add dt-schema for AD7292
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: temperature: ltc2983: fix u32 read into a unsigned long long
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: timer: Convert stm32 IIO trigger bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: dac: Migrate LTC1660 documentation to yaml
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: dac: Migrate LTC1660 documentation to yaml
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: dac: Migrate LTC1660 documentation to yaml
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v6 3/3] iio: documentation: light: Add veml6030 sysfs documentation
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• [PATCH v6 2/3] dt-bindings: iio: light: add veml6030 ALS bindings
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• [PATCH v6 1/3] iio: light: add driver for veml6030 ambient light sensor
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• Re: [PATCH] iio: adc: lpc18xx: use devm_platform_ioremap_resource
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: adc: vf610: use devm_platform_ioremap_resource
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: dac: vf610: Use devm_platform_ioremap_resource
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: adc: spear_adc: Use devm_platform_ioremap_resource
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: adc: rcar-gyroadc: use devm_platform_ioremap_resource
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: adc: npcm: use devm_platform_ioremap_resource
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: dac: lpc18xx: Use devm_platform_ioremap_resource
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ingenic: Use devm_platform_ioremap_resource
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: adc: cc10001: use devm_platform_ioremap_resource
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: adc: bcm_iproc_adc: drop a stray semicolon
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mt6577_auxdac: use devm_platform_ioremap_resource
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: adc: aspeed: use devm_platform_ioremap_resource
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio:adc:ti-adc084s021: Endian casting tidy ups.
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: ad7949: fix channels mixups
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH 0/1] Add support for TI HDC200x humidity and temperature sensors
  • From: Eugene Zaikonnikov <eugene.zaikonnikov@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: max31856: add option for setting mains filter rejection frequency
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [PATCH] iio: adc: ad7606: fix reading unnecessary data from device
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: adis16460: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 08/10] iio: imu: adis16480: assign bias value only if operation succeeded
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 02/10] iio: imu: adis16400: check ret val for non-zero vs less-than-zero
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH -next] iio: st_accel: Fix unused variable warning
  • From: Yuehaibing <yuehaibing@xxxxxxxxxx>
• [PATCH v2 2/2] iio: imu: st_lsm6dsx: express odr in mHZ
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 1/2] iio: imu: st_lsm6dsx: explicitly define odr table size
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 0/2] support rational ODRs in st_lsm6dsx
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: st_lsm6dsx: express odr in HZ / 10
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• iio: Request for review. Warning fix patches.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 03/18] platform: cros_ec: Add cros_ec_sensor_hub driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 02/18] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 01/18] platform: chrome: Put docs with the code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: stm32: allow to tune analog clock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/1] Add support for TI HDC200x humidity and temperature sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adis16480: Add debugfs_reg_access entry
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adis16480: Fix scales factors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add driver support for AD7292
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: adis16460: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC] iio: srf04: add parallax ping sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: timer: Convert stm32 IIO trigger bindings to json-schema
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] iio: st_accel: Fix unused variable warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 10/10] iio: imu: adis: assign value only if return code zero in read funcs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/10] iio: imu: adis: assign read val in debugfs hook only if op successful
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/10] iio: imu: adis16480: assign bias value only if operation succeeded
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/10] iio: imu: adis16480: prefer `unsigned int` over `unsigned`
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/10] iio: imu: adis16480: fix indentation of return statement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/10] iio: imu: adis: check ret val for non-zero vs less-than-zero
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/10] iio: imu: adis16480: check ret val for non-zero vs less-than-zero
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/10] iio: imu: adis16460: check ret val for non-zero vs less-than-zero
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/10] iio: imu: adis16400: check ret val for non-zero vs less-than-zero
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/10] iio: gyro: adis16136: check ret val for non-zero vs less-than-zero
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: st_lsm6dsx: express odr in HZ / 10
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] iio: st_accel: Fix unused variable warning
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: fix ODR check in st_lsm6dsx_write_raw
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dln2-adc: fix iio_triggered_buffer_postenable() position
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: pressure: bmp280: use devm action and remove labels from probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: max31856: add option for setting mains filter rejection frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] iio: st_accel: Fix unused variable warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] iio: st_accel: Fix unused variable warning
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: Add driver support for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: adc: Add dt-schema for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v3 0/2] iio: adc: Add support for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH -next] iio: st_accel: Fix unused variable warning
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH 00/10] iio: adis: cleanups and fixes
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 01/10] iio: gyro: adis16136: check ret val for non-zero vs less-than-zero
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 10/10] iio: imu: adis: assign value only if return code zero in read funcs
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 02/10] iio: imu: adis16400: check ret val for non-zero vs less-than-zero
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 03/10] iio: imu: adis16460: check ret val for non-zero vs less-than-zero
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 07/10] iio: imu: adis16480: prefer `unsigned int` over `unsigned`
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 09/10] iio: imu: adis: assign read val in debugfs hook only if op successful
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 04/10] iio: imu: adis16480: check ret val for non-zero vs less-than-zero
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 08/10] iio: imu: adis16480: assign bias value only if operation succeeded
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 06/10] iio: imu: adis16480: fix indentation of return statement
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 05/10] iio: imu: adis: check ret val for non-zero vs less-than-zero
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: imu: adis: assign value only if return code zero in read funcs
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PULL] 2nd set of IIO + counter new device support, features etc for the 5.5 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/18] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/8] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/8] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Rodrigo Carvalho <rodrigorsdc@xxxxxxxxx>
• [PULL] 2nd set of IIO + counter new device support, features etc for the 5.5 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/8] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PULL] 2nd set of IIO fixes for the 5.4 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] support rational ODRs in st_lsm6dsx
  • From: Mario TESI <mario.tesi@xxxxxx>
• Re: [PATCH 2/8] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 2/4] dt-bindings: iio: timer: Convert stm32 IIO trigger bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 0/4] Convert STM32 Timer mdf bindings to yaml
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 1/4] dt-bindings: counter: Convert stm32 counter bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 4/4] dt-bindings: mfd: Convert stm32 timers bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 3/4] dt-bindings: pwm: Convert stm32 pwm bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [RFC] iio: srf04: add parallax ping sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [RFC PATCH] iio: adc: ad7091r5: ad7091r_remove() can be static
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/4] iio: adc: ad7091r5: Add scale and external VREF support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] iio: pressure: bmp280: use devm action and remove labels from probe
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PULL] 2nd set of IIO fixes for the 5.4 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/9] drivers/iio: Sign extend without triggering implementation-defined behavior
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: imu: adis: assign value only if return code zero in read funcs
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: adis16460: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
  • From: zhong jiang <zhongjiang@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: adis16460: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH 2/2] iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
  • From: zhong jiang <zhongjiang@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: adis16460: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
  • From: zhong jiang <zhongjiang@xxxxxxxxxx>
• [PATCH 0/2] iio: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
  • From: zhong jiang <zhongjiang@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adis16480: Add debugfs_reg_access entry
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH] iio: dln2-adc: fix iio_triggered_buffer_postenable() position
  • From: Jack Andersen <jackoalan@xxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: Add support for AD7091R5 ADC
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adis16480: Add debugfs_reg_access entry
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-binding: iio: Add documentation for AD7091R5
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 4/4] MAINTAINERS: add entry for AD7091R5 driver
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v2 3/4] dt-binding: iio: Add documentation for AD7091R5
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v2 2/4] iio: adc: ad7091r5: Add scale and external VREF support
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v2 1/4] iio: adc: Add support for AD7091R5 ADC
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v2 1/2] iio: adis16480: Fix scales factors
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 2/2] iio: adis16480: Add debugfs_reg_access entry
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 0/2] iio: adc: stm32: add max clock rate
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 2/2] iio: adc: stm32: allow to tune analog clock
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 1/2] dt-bindings: iio: stm32-adc: add max clock rate property
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH][RESEND] New driver for TLV493D-A1B6 I2C chip, input and hwmon class device.
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adis16480: Add debugfs_reg_access entry
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: max31856: add option for setting mains filter rejection frequency
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH] iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v3 03/18] platform: cros_ec: Add cros_ec_sensor_hub driver
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 04/18] platform/mfd:iio: cros_ec: Register sensor through sensorhub
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 11/18] platform: chrome: sensorhub: Add code to spread timestmap
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 13/18] iio: cros_ec: Move function description to .c file
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 15/18] iio: cros_ec: Remove pm function
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 16/18] iio: cros_ec: Expose hwfifo_timeout
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 18/18] iio: cros_ec: Use Hertz as unit for sampling frequency
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 14/18] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 05/18] platform: chrome: cros-ec: record event timestamp in the hard irq
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 17/18] iio: cros_ec: Report hwfifo_watermark_max
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 12/18] platform: chrome: sensorhub: Add median filter
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 10/18] platform: chrome: sensorhub: Add FIFO support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 09/18] Revert "Input: cros_ec_keyb: mask out extra flags in event_type"
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 08/18] Revert "Input: cros_ec_keyb - add back missing mask for event_type"
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 07/18] platform: chrome: cros_ec: handle MKBP more events flag
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 06/18] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 01/18] platform: chrome: Put docs with the code
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 02/18] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 00/18] cros_ec: Add sensorhub driver and FIFO processing
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 2/2] iio: imu: st_lsm6dsx: express odr in HZ / 10
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: st_lsm6dsx: explicitly define odr table size
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/2] support rational ODRs in st_lsm6dsx
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: fix ODR check in st_lsm6dsx_write_raw
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH] iio: dln2-adc: fix iio_triggered_buffer_postenable() position
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] tools: iio: Correctly add make dependency for iio_utils
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/3] iio: light: add driver for veml6030 ambient light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] iio: documentation: light: Add veml6030 sysfs documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSRX
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adis16480: Add debugfs_reg_access entry
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adis16480: Fix scales factors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: fix stopping dma
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st: Drop GPIO include
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: Add driver support for AD7292
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: light: add driver for veml6030 ambient light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: max31856: add option for setting mains filter rejection frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: accel: bma400: add bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: adc: stm32-adc: fix stopping dma
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 1/2] iio: adis16480: Fix scales factors
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 2/2] iio: adis16480: Add debugfs_reg_access entry
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v2 01/18] platform: chrome: Put docs with the code
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSRX
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/2] add support to STM LSM6DSRX 6-axis Mems sensor
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 5/8] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: mfd: iqs62x: Add bindings
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH 3/8] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: mfd: iqs62x: Add bindings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] iio: st: Drop GPIO include
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: max31856: add option for setting mains filter rejection frequency
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [PATCH] iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: dln2-adc: fix iio_triggered_buffer_postenable() position
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 5/8] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: adc: Add DT docs for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: mfd: iqs62x: Add bindings
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH 7/8] iio: proximity: Add support for Azoteq IQS622 proximity sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH 6/8] iio: light: Add support for Azoteq IQS621 ambient light sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH 5/8] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH 4/8] hwmon: Add support for Azoteq IQS620AT temperature sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH 3/8] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH 3/8] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 18/18] iio: cros_ec: Use Hertz as unit for sampling frequency
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: adc: Add DT docs for AD7292
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/3] dt-bindings: iio: light: add veml6030 ALS bindings
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: Add driver support for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v5 3/3] iio: documentation: light: Add veml6030 sysfs documentation
  • From: rishi gupta <gupt21@xxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: adc: Add DT docs for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v5 3/3] iio: documentation: light: Add veml6030 sysfs documentation
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• [PATCH v5 2/3] dt-bindings: iio: light: add veml6030 ALS bindings
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• [PATCH v5 1/3] iio: light: add driver for veml6030 ambient light sensor
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• Re: [PATCH] dt-bindings: mma8452: Re-word 'interrupt-names' description
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH v4 1/3] iio: light: add driver for veml6030 ambient light sensor
  • From: rishi gupta <gupt21@xxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc: hx711: optimize performance in read cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: temperature: Add support for LTC2983
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: fix kernel-doc warnings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][RFC] iio: core: add a class hierarchy on iio device lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: fix no data on MPU6050
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: sgp30: drop excess semicolon
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/8] iio: proximity: Add support for Azoteq IQS622 proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/8] iio: light: Add support for Azoteq IQS621 ambient light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/8] hwmon: Add support for Azoteq IQS620AT temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 8/8] iio: position: Add support for Azoteq IQS624/625 angle sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: mfd: iqs62x: Add bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: mma8452: Re-word 'interrupt-names' description
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 10/18] platform: chrome: sensorhub: Add FIFO support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: temperature: Add support for LTC2983
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: tsl4030: Use false / true instead of 0 / 1 with booleans
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: pressure: bmp280: use devm action and remove labels from probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/18] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 05/18] platform: chrome: cros-ec: record event timestamp in the hard irq
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: light: add driver for veml6030 ambient light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: documentation: light: Add veml6030 sysfs documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/18] platform/mfd:iio: cros_ec: Register sensor through sensorhub
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: max31856: add option for setting mains filter rejection frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: imu: add fxos8700 imu binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: imu: Add support for the FXOS8700 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: ad7949: fix channels mixups
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: mma8452: Re-word 'interrupt-names' description
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH v2 03/18] platform: cros_ec: Add cros_ec_sensor_hub driver
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 5/8] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 5/8] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 3/3] iio: documentation: light: Add veml6030 sysfs documentation
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• [PATCH v4 2/3] dt-bindings: iio: light: add veml6030 ALS bindings
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• [PATCH v4 1/3] iio: light: add driver for veml6030 ambient light sensor
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• [PATCH] dt-bindings: mma8452: Re-word 'interrupt-names' description
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 4/8] hwmon: Add support for Azoteq IQS620AT temperature sensor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 4/8] hwmon: Add support for Azoteq IQS620AT temperature sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v2 10/18] platform: chrome: sensorhub: Add FIFO support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: light: add veml6030 ALS bindings
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: imu: Add support for the FXOS8700 IMU
  • From: Bobby Jones <rjones@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: Add driver support for AD7292
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 18/18] iio: cros_ec: Use Hertz as unit for sampling frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 17/18] iio: cros_ec: Report hwfifo_watermark_max
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 16/18] iio: cros_ec: Expose hwfifo_timeout
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 15/18] iio: cros_ec: Remove pm function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 14/18] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 13/18] iio: cros_ec: Move function description to .c file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 10/18] platform: chrome: sensorhub: Add FIFO support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/18] platform: chrome: cros_ec: handle MKBP more events flag
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/18] platform/mfd:iio: cros_ec: Register sensor through sensorhub
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 03/18] platform: cros_ec: Add cros_ec_sensor_hub driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/18] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/8] hwmon: Add support for Azoteq IQS620AT temperature sensor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 01/18] platform: chrome: Put docs with the code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/18] cros_ec: Add sensorhub driver and FIFO processing*** SUBJECT HERE
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: (bma400) add driver for the BMA400
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/18] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] iio: adc: ad7091r5: Add scale and external VREF support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: Add support for AD7091R5 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/4] dt-binding: iio: Add documentation for AD7091R5
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 2/4] iio: adc: ad7091r5: Add scale and external VREF support
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 1/4] iio: adc: Add support for AD7091R5 ADC
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 4/4] MAINTAINERS: add entry for AD7091R5 driver
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [RESEND PATCH v2 0/3] Add driver for veml6030 ambient light sensor
  • From: rishi gupta <gupt21@xxxxxxxxx>
• [PATCH v3 3/3] iio: documentation: light: Add veml6030 sysfs documentation
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: iio: light: add veml6030 ALS bindings
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• [PATCH v3 1/3] iio: light: add driver for veml6030 ambient light sensor
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• Re: [PATCH v2] iio: pressure: bmp280: use devm action and remove labels from probe
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] iio: chemical: sgp30: drop excess semicolon
  • From: Andreas Brauchli <a.brauchli@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/8] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 01/18] platform: chrome: Put docs with the code
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 00/18] cros_ec: Add sensorhub driver and FIFO processing*** SUBJECT HERE
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 02/18] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 08/18] Revert "Input: cros_ec_keyb - add back missing mask for event_type"
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 10/18] platform: chrome: sensorhub: Add FIFO support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 11/18] platform: chrome: sensorhub: Add code to spread timestmap
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 07/18] platform: chrome: cros_ec: handle MKBP more events flag
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 03/18] platform: cros_ec: Add cros_ec_sensor_hub driver
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 04/18] platform/mfd:iio: cros_ec: Register sensor through sensorhub
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 12/18] platform: chrome: sensorhub: Add median filter
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 18/18] iio: cros_ec: Use Hertz as unit for sampling frequency
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 17/18] iio: cros_ec: Report hwfifo_watermark_max
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 16/18] iio: cros_ec: Expose hwfifo_timeout
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 15/18] iio: cros_ec: Remove pm function
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 14/18] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 13/18] iio: cros_ec: Move function description to .c file
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 09/18] Revert "Input: cros_ec_keyb: mask out extra flags in event_type"
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 05/18] platform: chrome: cros-ec: record event timestamp in the hard irq
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 06/18] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 7/8] iio: proximity: Add support for Azoteq IQS622 proximity sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH 8/8] iio: position: Add support for Azoteq IQS624/625 angle sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH 6/8] iio: light: Add support for Azoteq IQS621 ambient light sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH 5/8] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH 4/8] hwmon: Add support for Azoteq IQS620AT temperature sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH 3/8] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH 2/8] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH 1/8] dt-bindings: mfd: iqs62x: Add bindings
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH 0/8] Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: adc: Add DT docs for AD7292
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: adc: tsl4030: Use false / true instead of 0 / 1 with booleans
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: adc: Add DT docs for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: (bma400) add driver for the BMA400
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 5.3 02/89] iio: fix center temperature of bmc150-accel-core
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 70/89] iio: accel: adxl372: Fix/remove limitation for FIFO samples
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 71/89] iio: accel: adxl372: Fix push to buffers lost samples
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 72/89] iio: accel: adxl372: Perform a reset at start up
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 69/89] iio: adc: hx711: fix bug in sampling of data
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 73/89] iio: imu: adis16400: release allocated memory on failure
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 75/89] iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 77/89] iio: light: add missing vcnl4040 of_compatible
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 74/89] iio: imu: adis16400: fix memory leak
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 79/89] iio: light: opt3001: fix mutex unlock race
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 76/89] iio: light: fix vcnl4000 devicetree hooks
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 050/100] iio: adc: meson_saradc: Fix memory allocation order
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 051/100] iio: fix center temperature of bmc150-accel-core
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 090/100] iio: imu: adis16400: release allocated memory on failure
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 089/100] iio: adc: hx711: fix bug in sampling of data
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 091/100] iio: adc: ad799x: fix probe error handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 092/100] iio: light: opt3001: fix mutex unlock race
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 19/56] iio: adc: meson_saradc: Fix memory allocation order
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 20/56] iio: fix center temperature of bmc150-accel-core
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 48/56] iio: adc: ad799x: fix probe error handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 49/56] iio: light: opt3001: fix mutex unlock race
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 09/29] iio: fix center temperature of bmc150-accel-core
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 23/29] iio: adc: ad799x: fix probe error handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 06/21] iio: fix center temperature of bmc150-accel-core
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 16/21] iio: adc: ad799x: fix probe error handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 17/21] iio: light: opt3001: fix mutex unlock race
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 24/29] iio: light: opt3001: fix mutex unlock race
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 78/89] iio: adc: ad799x: fix probe error handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 01/89] iio: adc: meson_saradc: Fix memory allocation order
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Clean-up regulator '-supply' schemas
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad9834: add a check for devm_clk_get
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: xilinix-xadc: use devm_platform_ioremap_resource
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: temp: maxim thermocouple: Drop unneeded semi colon.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: cpcap-adc: Fix missing IRQF_ONESHOT as only threaded handler.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: meson_saradc: use devm_platform_ioremap_resource
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: exynos: use devm_platform_ioremap_resource
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: exynos: Drop a stray semicolon
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: pulsedlight v2: Tidy up an endian issue
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: bmp280 endian tidy ups
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: gyro: mpu3050: Explicity make a 'poison' value big endian
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: sps30: Explicity truncate constant by masking
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:adc:stmpe-adc: Cleanup endian type of local variable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>