This change replaces indio_dev's mlock with the drivers own lock. In
each case the lock is needed to protect the driver's own state.
Signed-off-by: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
---
drivers/iio/adc/max1363.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index 5c2cc61b666e..b9557f957f3c 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -169,6 +169,7 @@ struct max1363_state {
const struct max1363_mode *current_mode;
u32 requestedmask;
struct regulator *reg;
+ struct mutex lock;
/* Using monitor modes and buffer at the same time is
currently not supported */
@@ -364,7 +365,7 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,
struct max1363_state *st = iio_priv(indio_dev);
struct i2c_client *client = st->client;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&st->lock);
/*
* If monitor mode is enabled, the method for reading a single
* channel will have to be rather different and has not yet
@@ -405,7 +406,7 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,
}
*val = data;
error_ret:
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
return ret;
}
@@ -705,9 +706,9 @@ static ssize_t max1363_monitor_store_freq(struct device *dev,
if (!found)
return -EINVAL;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&st->mlock);
st->monitor_speed = i;
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->mlock);
return 0;
}
@@ -810,12 +811,12 @@ static int max1363_read_event_config(struct iio_dev *indio_dev,
int val;
int number = chan->channel;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&st->mlock);
if (dir == IIO_EV_DIR_FALLING)
val = (1 << number) & st->mask_low;
else
val = (1 << number) & st->mask_high;
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->mlock);
return val;
}
--
2.23.0.385.gbc12974a89
