This change moves the logic to check if the current channel is the touchscreen channel to a separate helper. This reduces some code duplication, but the main intent is to re-use this in the next patches. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> --- This patchset continues discussion: https://lore.kernel.org/linux-iio/20191023082508.17583-1-alexandru.ardelean@xxxxxxxxxx/ Apologies for the delay. Changelog v1 -> v2: * added patch 'iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch() helper' * renamed at91_adc_buffer_postenable() -> at91_adc_buffer_preenable() - at91_adc_buffer_postenable() - now just calls iio_triggered_buffer_postenable() if the channel isn't the touchscreen channel * renamed at91_adc_buffer_predisable() -> at91_adc_buffer_postdisable() - at91_adc_buffer_predisable() - now just calls iio_triggered_buffer_predisable() if the channel isn't the touchscreen channel drivers/iio/adc/at91-sama5d2_adc.c | 31 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 16 deletions(-) diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c index a5c7771227d5..f2a74c47c768 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -873,18 +873,24 @@ static int at91_adc_dma_start(struct iio_dev *indio_dev) return 0; } +static bool at91_adc_current_chan_is_touch(struct iio_dev *indio_dev) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + + return !!bitmap_subset(indio_dev->active_scan_mask, + &st->touch_st.channels_bitmask, + AT91_SAMA5D2_MAX_CHAN_IDX + 1); +} + static int at91_adc_buffer_postenable(struct iio_dev *indio_dev) { int ret; struct at91_adc_state *st = iio_priv(indio_dev); /* check if we are enabling triggered buffer or the touchscreen */ - if (bitmap_subset(indio_dev->active_scan_mask, - &st->touch_st.channels_bitmask, - AT91_SAMA5D2_MAX_CHAN_IDX + 1)) { - /* touchscreen enabling */ + if (at91_adc_current_chan_is_touch(indio_dev)) return at91_adc_configure_touch(st, true); - } + /* if we are not in triggered mode, we cannot enable the buffer. */ if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES)) return -EINVAL; @@ -906,12 +912,9 @@ static int at91_adc_buffer_predisable(struct iio_dev *indio_dev) u8 bit; /* check if we are disabling triggered buffer or the touchscreen */ - if (bitmap_subset(indio_dev->active_scan_mask, - &st->touch_st.channels_bitmask, - AT91_SAMA5D2_MAX_CHAN_IDX + 1)) { - /* touchscreen disable */ + if (at91_adc_current_chan_is_touch(indio_dev)) return at91_adc_configure_touch(st, false); - } + /* if we are not in triggered mode, nothing to do here */ if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES)) return -EINVAL; @@ -1886,14 +1889,10 @@ static __maybe_unused int at91_adc_resume(struct device *dev) return 0; /* check if we are enabling triggered buffer or the touchscreen */ - if (bitmap_subset(indio_dev->active_scan_mask, - &st->touch_st.channels_bitmask, - AT91_SAMA5D2_MAX_CHAN_IDX + 1)) { - /* touchscreen enabling */ + if (at91_adc_current_chan_is_touch(indio_dev)) return at91_adc_configure_touch(st, true); - } else { + else return at91_adc_configure_trigger(st->trig, true); - } /* not needed but more explicit */ return 0; -- 2.20.1
