The iio_triggered_buffer_{predisable,postenable} functions attach/detach
poll functions.
In most cases the iio_triggered_buffer_postenable() should be called first
to attach the poll function, and then the driver can init the data to be
triggered.
In this case it's the other way around: the DMA code should be initialized
before the attaching the poll function and the reverse should be done when
un-initializing.
To make things easier when removing the iio_triggered_buffer_postenable() &
iio_triggered_buffer_predisable() functions from the IIO core API, the DMA
code has been moved into preenable() for init, and postdisable() for
uninit.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
---
drivers/iio/adc/at91-sama5d2_adc.c | 32 ++++++++++++++++++++----------
1 file changed, 22 insertions(+), 10 deletions(-)
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index f2a74c47c768..2e01073d401d 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -882,7 +882,7 @@ static bool at91_adc_current_chan_is_touch(struct iio_dev *indio_dev)
AT91_SAMA5D2_MAX_CHAN_IDX + 1);
}
-static int at91_adc_buffer_postenable(struct iio_dev *indio_dev)
+static int at91_adc_buffer_preenable(struct iio_dev *indio_dev)
{
int ret;
struct at91_adc_state *st = iio_priv(indio_dev);
@@ -902,13 +902,20 @@ static int at91_adc_buffer_postenable(struct iio_dev *indio_dev)
return ret;
}
+ return 0;
+}
+
+static int at91_adc_buffer_postenable(struct iio_dev *indio_dev)
+{
+ if (at91_adc_current_chan_is_touch(indio_dev))
+ return 0;
+
return iio_triggered_buffer_postenable(indio_dev);
}
-static int at91_adc_buffer_predisable(struct iio_dev *indio_dev)
+static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev)
{
struct at91_adc_state *st = iio_priv(indio_dev);
- int ret;
u8 bit;
/* check if we are disabling triggered buffer or the touchscreen */
@@ -919,13 +926,8 @@ static int at91_adc_buffer_predisable(struct iio_dev *indio_dev)
if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES))
return -EINVAL;
- /* continue with the triggered buffer */
- ret = iio_triggered_buffer_predisable(indio_dev);
- if (ret < 0)
- dev_err(&indio_dev->dev, "buffer predisable failed\n");
-
if (!st->dma_st.dma_chan)
- return ret;
+ return 0;
/* if we are using DMA we must clear registers and end DMA */
dmaengine_terminate_sync(st->dma_st.dma_chan);
@@ -952,10 +954,20 @@ static int at91_adc_buffer_predisable(struct iio_dev *indio_dev)
/* read overflow register to clear possible overflow status */
at91_adc_readl(st, AT91_SAMA5D2_OVER);
- return ret;
+ return 0;
+}
+
+static int at91_adc_buffer_predisable(struct iio_dev *indio_dev)
+{
+ if (at91_adc_current_chan_is_touch(indio_dev))
+ return 0;
+
+ return iio_triggered_buffer_predisable(indio_dev);
}
static const struct iio_buffer_setup_ops at91_buffer_setup_ops = {
+ .preenable = &at91_adc_buffer_preenable,
+ .postdisable = &at91_adc_buffer_postdisable,
.postenable = &at91_adc_buffer_postenable,
.predisable = &at91_adc_buffer_predisable,
};
--
2.20.1
