This patch adds entries in the syfs docs of ADXL372. Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx> Signed-off-by: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx> --- .../ABI/testing/sysfs-bus-iio-accel-adxl372 | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372 diff --git a/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372 b/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372 new file mode 100644 index 000000000000..709376b54bec --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372 @@ -0,0 +1,30 @@ +What: /sys/bus/iio/devices/iio:deviceX/buffer_peak_mode_enable +KernelVersion: +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + This attribute allows to configure the FIFO to store sample + sets of impact event peak (x, y, z). As a precondition, all + three channels (x, y, z) need to be enabled. + Writing 1, peak fifo mode will be enabled, if cleared and + all three channels are enabled, sample sets of concurrent + 3-axis data will be stored in the FIFO. + +What: /sys/bus/iio/devices/iio:deviceX/activity_detect_event +KernelVersion: +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + adxl372 works in loop mode. It will loop between activity + and inactivity detection mode. The thresh_rising sysfs files + found in events/ need to be configured in order to define when + the device will mark a sensed acceleration over a period of + time as activity. + +What: /sys/bus/iio/devices/iio:deviceX/inactivity_detect_event +KernelVersion: +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + adxl372 works in loop mode. It will loop between activity + and inactivity detection mode. The thresh_falling sysfs files + found in events/ need to be configured in order to define when + the device will mark a sensed acceleration over a period of + time as inactivity. -- 2.20.1
