On Sat, 7 Mar 2020 11:15:58 +0530 Rohit Sarkar <rohitsarkar5398@xxxxxxxxx> wrote: > Replace usage indio_dev's mlock with either local lock or > iio_device_claim_direct_mode. > > Signed-off-by: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx> If sending patches for which there is already a version on the list which hasn't been commented on please do 2 things. 1) Reply to the previous patch email to highlight what was wrong - stops me missing the updated version and picking up the old one. 2) change log below the --- > --- > drivers/iio/adc/max1363.c | 24 +++++++++++++++--------- > 1 file changed, 15 insertions(+), 9 deletions(-) > > diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c > index 5c2cc61b666e..d26f68d23250 100644 > --- a/drivers/iio/adc/max1363.c > +++ b/drivers/iio/adc/max1363.c > @@ -150,6 +150,7 @@ struct max1363_chip_info { > * @current_mode: the scan mode of this chip > * @requestedmask: a valid requested set of channels > * @reg: supply regulator > + * @lock lock to ensure state is consistent > * @monitor_on: whether monitor mode is enabled > * @monitor_speed: parameter corresponding to device monitor speed setting > * @mask_high: bitmask for enabled high thresholds > @@ -169,6 +170,7 @@ struct max1363_state { > const struct max1363_mode *current_mode; > u32 requestedmask; > struct regulator *reg; > + struct mutex lock; > > /* Using monitor modes and buffer at the same time is > currently not supported */ > @@ -364,7 +366,9 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, > struct max1363_state *st = iio_priv(indio_dev); > struct i2c_client *client = st->client; > > - mutex_lock(&indio_dev->mlock); > + ret = iio_device_claim_direct_mode(indio_dev); > + if (ret < 0) > + goto error_ret; > /* > * If monitor mode is enabled, the method for reading a single > * channel will have to be rather different and has not yet > @@ -372,7 +376,7 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, > * > * Also, cannot read directly if buffered capture enabled. > */ > - if (st->monitor_on || iio_buffer_enabled(indio_dev)) { > + if (st->monitor_on) { > ret = -EBUSY; > goto error_ret; > } > @@ -404,8 +408,9 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, > data = rxbuf[0]; > } > *val = data; > + > error_ret: > - mutex_unlock(&indio_dev->mlock); > + iio_device_release_direct_mode(indio_dev); > return ret; > > } > @@ -705,9 +710,9 @@ static ssize_t max1363_monitor_store_freq(struct device *dev, > if (!found) > return -EINVAL; > > - mutex_lock(&indio_dev->mlock); > + mutex_lock(&st->lock); > st->monitor_speed = i; > - mutex_unlock(&indio_dev->mlock); > + mutex_unlock(&st->lock); > > return 0; > } > @@ -810,12 +815,12 @@ static int max1363_read_event_config(struct iio_dev *indio_dev, > int val; > int number = chan->channel; > > - mutex_lock(&indio_dev->mlock); > + mutex_lock(&st->lock); > if (dir == IIO_EV_DIR_FALLING) > val = (1 << number) & st->mask_low; > else > val = (1 << number) & st->mask_high; > - mutex_unlock(&indio_dev->mlock); > + mutex_unlock(&st->lock); > > return val; > } > @@ -962,7 +967,7 @@ static int max1363_write_event_config(struct iio_dev *indio_dev, > u16 unifiedmask; > int number = chan->channel; > > - mutex_lock(&indio_dev->mlock); > + iio_device_claim_direct_mode(indio_dev); > unifiedmask = st->mask_low | st->mask_high; > if (dir == IIO_EV_DIR_FALLING) { > > @@ -989,7 +994,7 @@ static int max1363_write_event_config(struct iio_dev *indio_dev, > > max1363_monitor_mode_update(st, !!(st->mask_high | st->mask_low)); > error_ret: > - mutex_unlock(&indio_dev->mlock); > + iio_device_release_direct_mode(indio_dev); > > return ret; > } > @@ -1587,6 +1592,7 @@ static int max1363_probe(struct i2c_client *client, > > st = iio_priv(indio_dev); > > + mutex_init(&st->lock); > st->reg = devm_regulator_get(&client->dev, "vcc"); > if (IS_ERR(st->reg)) { > ret = PTR_ERR(st->reg);