Linux IIO Development

• Thread Index

• [PATCH] tools: iio: Correctly add make dependency for iio_utils
  • From: Laura Abbott <labbott@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: max31856: add support for runtime-configuring the thermocouple type
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH 2/3] iio: max31856: add support for configuring the HW averaging
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH 1/3] iio: max31856: add option for setting mains filter rejection frequency
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH 5/7 v4] mfd: ab8500: augment DT bindings
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] mfd: ab8500: Fix up the GPADC binding example
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] mfd: ab8500: Fix up the GPADC binding example
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 5/7 v4] mfd: ab8500: augment DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 5/7 v4] mfd: ab8500: augment DT bindings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: (bma400) add driver for the BMA400
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v4 2/2] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: accel: bma400: add bindings
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v3 0/2] iio: add driver for Bosch BMA400 accelerometer
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: (bma400) add driver for the BMA400
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH] iio:adc:mcp320x: Tidy up endian types in type cast.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:adc:at91-sama5d2: Replace 0 with NULL when clearing some pointers.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/3] Simplify count_read/count_write/signal_read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/7 v4] AB8500 GPADC MFD to IIO conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/7 v4] mfd: ab8500: augment DT bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/7 v4] hwmon: ab8500: convert to IIO ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/6] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: adc: Add DT docs for AD7292
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: fix no data on MPU6050
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: sps30: Explicity truncate constant by masking
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: fix no data on MPU6050
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: ad9834: add a check for devm_clk_get
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Defer probe on POR read
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: max31856: add support for runtime-configuring the thermocouple type
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: max31856: add support for configuring the HW averaging
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: max31856: add option for setting mains filter rejection frequency
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [RFC/PATCHv2 2/2] counter: introduce support for Intel QEP Encoder
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [RFC/PATCHv2 2/2] counter: introduce support for Intel QEP Encoder
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] iio: adc: cpcap-adc: Fix missing IRQF_ONESHOT as only threaded handler.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] staging: iio: ad9834: add a check for devm_clk_get
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] iio: imu: inv_mpu6050: fix no data on MPU6050
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH] staging: iio: ad9834: add a check for devm_clk_get
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH 3/3] iio: max31856: add support for runtime-configuring the thermocouple type
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH 2/3] iio: max31856: add support for configuring the HW averaging
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH 1/3] iio: max31856: add option for setting mains filter rejection frequency
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: imu: add fxos8700 imu binding
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: bmp280 endian tidy ups
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: gyro: mpu3050: Explicity make a 'poison' value big endian
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: adc: max9611: Defer probe on POR read
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• Re: [PATCH] mfd: twl: endian fixups in i2c write and read wrappers.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] iio: light: adux1020: Drop an unwanted semicolon.
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: adc: Add DT docs for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v2 1/2] iio: adc: Add driver support for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v2 0/2] iio: adc: Add driver support for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH][RFC] iio: core: add a class hierarchy on iio device lock
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 12/13] dt-bindings: iio: imu: st_lsm6dsx: document missing wakeup-source property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: light: adux1020: Drop an unwanted semicolon.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: iio: adc: exynos: Use defines instead of clock numbers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: rtc: s3c: Include generic dt-schema bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: rtc: s3c: Use defines instead of clock numbers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: samsung: Indent examples with four spaces
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Add driver support for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: jic23@xxxxxxxxxx
• Re: [PATCH v2] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: (bma400) add driver for the BMA400
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Applied "spi: spi-falcon: extend warning to `delay` as well" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-axi: extend support for the `delay` field" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spidev: use new `delay` field for spi transfers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: implement SW control for CS times" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: change format for `spi_set_cs_timing()` function" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: core,atmel: convert `word_delay_usecs` -> `word_delay` for spi_device" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: use `spi_transfer_delay_exec` helper" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-espi: convert transfer delay to `spi_delay` format" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sprd: convert transfer word delay to spi_delay struct" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra20-sflash: use to new `spi_transfer_delay_exec`" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: orion: use new `word_delay` field for SPI transfers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spidev: use new `word_delay` field for spi transfers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-loopback-test: use new `delay` field" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: introduce spi_delay struct as "value + unit" & spi_delay_exec()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: move `cs_change_delay` backwards compat logic outside switch" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: make `cs_change_delay` the first user of the `spi_delay` logic" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm63xx: extend error condition to `delay` as well" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 04/19] spi: sprd: convert transfer word delay to spi_delay struct
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: (bma400) add driver for the BMA400 (fwd)
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: accel: bma400: add bindings
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: xilinix-xadc: use devm_platform_ioremap_resource
  • From: Sven Van Asbroeck <thesven73@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: imu: add fxos8700 imu binding
  • From: Robert Jones <rjones@xxxxxxxxxxxxx>
• [PATCH v4 2/2] iio: imu: Add support for the FXOS8700 IMU
  • From: Robert Jones <rjones@xxxxxxxxxxxxx>
• [PATCH v4 0/2] iio: imu: add support for FXOS8700
  • From: Robert Jones <rjones@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: imu: Add support for the FXOS8700 IMU
  • From: Bobby Jones <rjones@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: accel: bma400: add bindings
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: accel: bma400: add bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: (bma400) add driver for the BMA400
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH][RFC] iio: core: add a class hierarchy on iio device lock
  • From: Olivier MOYSAN <olivier.moysan@xxxxxx>
• Re: [PATCH v4 8/8] dt-bindings: Add max12xx SPI ADC series as trivial devices
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 7/8] dt-bindings: Add 1027/1029/1031 SPI ADCs as trivial devices
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: imu: add fxos8700 imu binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Add driver support for AD7292
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: Add DT docs for AD7292
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] iio:adc:stmpe-adc: Cleanup endian type of local variable
  • From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
• Re: [PATCH] iio:adc:at91-sama5d2: Replace 0 with NULL when clearing some pointers.
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: exynos: Drop a stray semicolon
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: exynos: use devm_platform_ioremap_resource
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: meson_saradc: use devm_platform_ioremap_resource
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: temp: maxim thermocouple: Drop unneeded semi colon.
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH] iio: temp: maxim thermocouple: Drop unneeded semi colon.
  • From: jic23@xxxxxxxxxx
• Re: [PATCH] iio: proximity: pulsedlight v2: Tidy up an endian issue
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH] iio: light: adux1020: Drop an unwanted semicolon.
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: dac: vf610: Use devm_platform_ioremap_resource
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: dac: lpc18xx: Use devm_platform_ioremap_resource
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: chemical: sgp30: drop excess semicolon
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: adc: xilinix-xadc: use devm_platform_ioremap_resource
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: adc: vf610: use devm_platform_ioremap_resource
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: adc: tsl4030: Use false / true instead of 0 / 1 with booleans
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: adc: cpcap-adc: Fix missing IRQF_ONESHOT as only threaded handler.
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: adc: spear_adc: Use devm_platform_ioremap_resource
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: adc: rcar-gyroadc: use devm_platform_ioremap_resource
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: adc: npcm: use devm_platform_ioremap_resource
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: adc: meson_saradc: use devm_platform_ioremap_resource
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: adc: lpc18xx: use devm_platform_ioremap_resource
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: adc: ingenic: Use devm_platform_ioremap_resource
  • From: jic23@xxxxxxxxxx
• [PATCH 2/2] dt-bindings: iio: adc: Add DT docs for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH 1/2] iio: adc: Add driver support for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH 0/2] iio: adc: Add driver support for AD7292
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH 2/2] iio: adc: exynos: use devm_platform_ioremap_resource
  • From: jic23@xxxxxxxxxx
• [PATCH 1/2] iio: adc: exynos: Drop a stray semicolon
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: adc: cc10001: use devm_platform_ioremap_resource
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: adc: bcm_iproc_adc: drop a stray semicolon
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: adc: mt6577_auxdac: use devm_platform_ioremap_resource
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: adc: aspeed: use devm_platform_ioremap_resource
  • From: jic23@xxxxxxxxxx
• Re: [PATCH] iio:adc:mcp320x: Tidy up endian types in type cast.
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH] iio: proximity: pulsedlight v2: Tidy up an endian issue
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: pressure: bmp280 endian tidy ups
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: gyro: mpu3050: Explicity make a 'poison' value big endian
  • From: jic23@xxxxxxxxxx
• [PATCH] iio: chemical: sps30: Explicity truncate constant by masking
  • From: jic23@xxxxxxxxxx
• [PATCH] iio:adc:ti-adc084s021: Endian casting tidy ups.
  • From: jic23@xxxxxxxxxx
• [PATCH] mfd: twl: endian fixups in i2c write and read wrappers.
  • From: jic23@xxxxxxxxxx
• [PATCH] iio:adc:stmpe-adc: Cleanup endian type of local variable
  • From: jic23@xxxxxxxxxx
• [PATCH] iio:adc:mcp320x: Tidy up endian types in type cast.
  • From: jic23@xxxxxxxxxx
• Re: [PULL v3] First set of iio new device support etc for the 5.5 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] iio:adc:at91-sama5d2: Replace 0 with NULL when clearing some pointers.
  • From: jic23@xxxxxxxxxx
• Note IIO togreg branch rebased.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL v3] First set of iio new device support etc for the 5.5 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL v2] First set of iio new device support etc for the 5.5 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL v2] First set of iio new device support etc for the 5.5 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: (bma400) add driver for the BMA400
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v3 2/2] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: accel: bma400: add bindings
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v3 0/2] iio: add driver for Bosch BMA400 accelerometer
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PULL v2] First set of iio new device support etc for the 5.5 cycle
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [RFC] iio: adis: Fix build warnings due to disagreement on whether ret can be > 0
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: (bma400) add driver for the BMA400
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC] iio: adis: Fix build warnings due to disagreement on whether ret can be > 0
  • From: jic23@xxxxxxxxxx
• Re: [PULL v2] First set of iio new device support etc for the 5.5 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PULL v2] First set of iio new device support etc for the 5.5 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL v2] First set of iio new device support etc for the 5.5 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] First set of IIO new device support etc for the 5.5 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/3] Simplify count_read/count_write/signal_read
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds0 device bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] add support to STM LSM6DS0 6-axis Mems sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DS0
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: fix gyro gain definitions for LSM9DS1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/3] Simplify count_read/count_write/signal_read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/7] iio: adc: max1027: Add debugfs register read support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: imu: Add support for the FXOS8700 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: dac: ad7303: replace mlock with own lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: gyro: adis16260: replace mlock with ADIS lib's state_lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/10] iio: imu: adis: add unlocked read/write function versions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: pressure: bmp280: use devm action and remove labels from probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: srf04: fix wrong limitation in distance measuring
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] add support to STM LSM6DS0 6-axis Mems sensor
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 00/13] various st_lsm6dsx fixes and missing bits
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: maxbotix,mb1232.yaml: transform to yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: add odr calibration feature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: adis16480: make sure provided frequency is positive
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: enable drdy-mask if available
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: stm32: add power management support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] add support to STM LSM6DS0 6-axis Mems sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 13/13] iio: imu: st_lsm6dsx: enable wake-up event for LSM6DSO
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 11/13] iio: imu: st_lsm6dsx: add missing kernel documenation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/13] various st_lsm6dsx fixes and missing bits
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH 10/13] iio: imu: st_lsm6dsx: add wakeup_source in st_sensors_platform_data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/13] iio: imu: st_lsm6dsx: fix checkpatch warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/13] iio: imu: st_lsm6dsx: grab conf mutex in st_lsm6dsx_write_event_config
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/13] iio: imu: st_lsm6dsx: rely on st_lsm6dsx_update_bits_locked configuring events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/13] iio: imu: st_lsm6dsx: always check enable_reg in st_lsm6dsx_event_setup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/13] various st_lsm6dsx fixes and missing bits
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/13] iio: imu: st_lsm6dsx: move bdu/boot and reset register info in hw_settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/13] iio: imu: st_lsm6dsx: do not access active-low/open-drain regs if not supported
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/13] iio: imu: st_lsm6dsx: move irq related definitions in irq_config
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/13] iio: imu: st_lsm6dsx: use st_lsm6dsx_read_locked in st_lsm6dsx_report_motion_event
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: adis16400: fix compiler warnings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for ADUX1020 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: imu: adis: add a note better explaining state_lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: adis16400: fix compiler warnings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: imu: adis: add doc-string for `adis` struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/8] iio: adc: max1027: Make it optional to use interrupts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 8/8] dt-bindings: Add max12xx SPI ADC series as trivial devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/8] dt-bindings: iio: adc: max1027: Mark interrupts as optional
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/8] iio: adc: max1027: Prepare the introduction of different resolutions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/8] iio: adc: max1027: Add debugfs register read support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/8] iio: adc: max1027: Introduce 12-bit devices support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/8] iio: adc: max1027: Reset the device at probe time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL v2] First set of iio new device support etc for the 5.5 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] First set of IIO new device support etc for the 5.5 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: temperature: Add support for LTC2983
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] First set of IIO new device support etc for the 5.5 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: Add support for ADUX1020 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: light: Add binding for ADUX1020
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: explicitly define odr table size
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: explicitly define odr table size
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: (bma400) add driver for the BMA400
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Clean-up regulator '-supply' schemas
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: accel: bma400: add bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: (bma400) add driver for the BMA400
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] First set of IIO new device support etc for the 5.5 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][RFC] iio: core: add a class hierarchy on iio device lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: (bma400) add driver for the BMA400
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: (bma400) add driver for the BMA400
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: accel: bma400: add bindings
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v2 0/2] iio: add driver for Bosch BMA400 accelerometer
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: imu: add fxos8700 imu binding
  • From: Bobby Jones <rjones@xxxxxxxxxxxxx>
• Re: [PATCH 4/7 v4] hwmon: ab8500: convert to IIO ADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] dt-bindings: Clean-up regulator '-supply' schemas
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 2/2] iio: light: Add support for ADUX1020 sensor
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: light: Add binding for ADUX1020
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v3 0/2] Add support for ADUX1020 sensor
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: light: Add binding for ADUX1020
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH][RFC] iio: core: add a class hierarchy on iio device lock
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• [PATCH v4 5/8] iio: adc: max1027: Introduce 12-bit devices support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v4 7/8] dt-bindings: Add 1027/1029/1031 SPI ADCs as trivial devices
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v4 8/8] dt-bindings: Add max12xx SPI ADC series as trivial devices
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v4 6/8] dt-bindings: iio: adc: max1027: Mark interrupts as optional
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v4 4/8] iio: adc: max1027: Prepare the introduction of different resolutions
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v4 3/8] iio: adc: max1027: Reset the device at probe time
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v4 2/8] iio: adc: max1027: Make it optional to use interrupts
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v4 0/8] Introduce max12xx ADC support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v4 1/8] iio: adc: max1027: Add debugfs register read support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: imu: add fxos8700 imu binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 5/7 v4] mfd: ab8500: augment DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/7 v4] hwmon: ab8500: convert to IIO ADC
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v4 1/2] iio: temperature: Add support for LTC2983
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 7/7 v4] mfd: Switch the AB8500 GPADC to IIO
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 6/7 v4] iio: adc: New driver for the AB8500 GPADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 5/7 v4] mfd: ab8500: augment DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 4/7 v4] hwmon: ab8500: convert to IIO ADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/7 v4] power: supply: ab8500_fg: convert to IIO ADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/7 v4] power: supply: ab8500_charger: convert to IIO ADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/7 v4] power: supply: ab8500_btemp: convert to IIO ADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/7 v4] AB8500 GPADC MFD to IIO conversion
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 5/7 v3] mfd: ab8500: augment DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 8/8] dt-bindings: Add max12xx SPI ADC series as trivial devices
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: maxbotix,mb1232.yaml: transform to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 8/8] dt-bindings: Add max12xx SPI ADC series as trivial devices
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 5/7 v3] mfd: ab8500: augment DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 2/2] iio: imu: Add support for the FXOS8700 IMU
  • From: Robert Jones <rjones@xxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: imu: add fxos8700 imu binding
  • From: Robert Jones <rjones@xxxxxxxxxxxxx>
• [PATCH v3 0/2] iio: imu: add support for FXOS8700
  • From: Robert Jones <rjones@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: samsung: Indent examples with four spaces
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: add fxos8700 imu binding
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PULL] 1st set of IIO fixes for the 5.4 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: imu: add fxos8700 imu binding
  • From: Robert Jones <rjones@xxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: imu: Add support for the FXOS8700 IMU
  • From: Robert Jones <rjones@xxxxxxxxxxxxx>
• [PATCH v2 0/2] iio: imu: add support for FXOS8700
  • From: Robert Jones <rjones@xxxxxxxxxxxxx>
• [PULL] 1st set of IIO fixes for the 5.4 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: dac: stm32: add power management support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for ADUX1020 sensor
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for ADUX1020 sensor
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for ADUX1020 sensor
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: (bma400) add driver for the BMA400
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v2] iio: imu: adis16480: make sure provided frequency is positive
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: core: Add optional symbolic label to device attributes
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Add binding for ADUX1020
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add support for ADUX1020 sensor
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: enable drdy-mask if available
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: temperature: Add support for LTC2983
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH 02/10] iio: imu: adis: add unlocked read/write function versions
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: imu: adis16400: fix compiler warnings
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 02/10] iio: imu: adis: add unlocked read/write function versions
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2] iio: gyro: adis16260: replace mlock with ADIS lib's state_lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/3] iio: imu: adis: update `adis_data` struct doc-string
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/3] iio: imu: adis: add a note better explaining state_lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/3] iio: imu: adis: add doc-string for `adis` struct
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: core: Add optional symbolic label to device attributes
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/10] iio: imu: adis: add unlocked read/write function versions
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for ADUX1020 sensor
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 02/10] iio: imu: adis: add unlocked read/write function versions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: core: Add optional symbolic label to device attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: explicitly define odr table size
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: maxbotix,mb1232.yaml: transform to yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH v3] dt-bindings: iio: maxbotix,mb1232.yaml: transform to yaml
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: maxbotix,mb1232.yaml: transform to yaml
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• [PATCH v2 2/2] iio: light: Add support for ADUX1020 sensor
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: light: Add binding for ADUX1020
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 0/2] Add support for ADUX1020 sensor
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] iio: imu: adis16480: clean up a condition
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: add odr calibration feature
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: add odr calibration feature
  • From: Mario Tesi <mario.tesi@xxxxxx>
• [PATCH v3 0/8] Introduce max12xx ADC support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 1/8] iio: adc: max1027: Add debugfs register read support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 2/8] iio: adc: max1027: Make it optional to use interrupts
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 3/8] iio: adc: max1027: Reset the device at probe time
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 6/8] dt-bindings: iio: adc: max1027: Mark interrupts as optional
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 7/8] dt-bindings: Add 1027/1029/1031 SPI ADCs as trivial devices
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 8/8] dt-bindings: Add max12xx SPI ADC series as trivial devices
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 4/8] iio: adc: max1027: Prepare the introduction of different resolutions
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 5/8] iio: adc: max1027: Introduce 12-bit devices support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Add binding for ADUX1020
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: rtc: s3c: Include generic dt-schema bindings
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: rtc: s3c: Use defines instead of clock numbers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: samsung: Indent examples with four spaces
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: maxbotix,mb1232.yaml: transform to yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Add binding for ADUX1020
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: temperature: Add support for LTC2983
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: temperature: Add support for LTC2983
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/7] iio: adc: max1027: Make it optional to use interrupts
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [BUG] iio: imu: st_lsm6dsx: read error when resuming from suspend
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [BUG] iio: imu: st_lsm6dsx: read error when resuming from suspend
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [BUG] iio: imu: st_lsm6dsx: read error when resuming from suspend
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Add binding for ADUX1020
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 01/10] iio: imu: adis: rename txrx_lock -> state_lock
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH 2/2] iio: light: Add support for ADUX1020 sensor
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: light: Add binding for ADUX1020
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 0/2] Add support for ADUX1020 sensor
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 7/7] dt-bindings: iio: adc: max1027: Document max12xx series compatibles
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2 4/7] iio: adc: max1027: Prepare the introduction of different resolutions
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] iio: adc: max1027: Make it optional to use interrupts
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2 1/7] iio: adc: max1027: Add debugfs register read support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds0 device bindings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DS0
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/2] add support to STM LSM6DS0 6-axis Mems sensor
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: imu: adis16480: clean up a condition
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] iio: adc: add support for Intel ADC
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: fix gyro gain definitions for LSM9DS1
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: temperature: Add support for LTC2983
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• [PATCH v2] iio: dac: ad7303: replace mlock with own lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 12/13] dt-bindings: iio: imu: st_lsm6dsx: document missing wakeup-source property
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 11/13] iio: imu: st_lsm6dsx: add missing kernel documenation
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH] iio: gyro: adis16260: remove indio_dev mlock
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 06/13] iio: imu: st_lsm6dsx: always check enable_reg in st_lsm6dsx_event_setup
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 03/13] iio: imu: st_lsm6dsx: move irq related definitions in irq_config
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 01/13] iio: imu: st_lsm6dsx: use st_lsm6dsx_read_locked in st_lsm6dsx_report_motion_event
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH] counter: stm32: clean up indentation issue
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] iio: gyro: adis16130: remove mlock usage
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2] iio: pressure: bmp280: use devm action and remove labels from probe
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v5 3/3] counter: Fix typo in action_get description
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v5 2/3] docs: driver-api: generic-counter: Update Count and Signal data types
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v5 1/3] counter: Simplify the count_read and count_write callbacks
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v5 0/3] Simplify count_read/count_write/signal_read
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v4 2/2] docs: driver-api: generic-counter: Update Count and Signal data types
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v4 2/2] docs: driver-api: generic-counter: Update Count and Signal data types
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] counter: Simplify the count_read and count_write callbacks
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: imu: adis16480: clean up a condition
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v4 1/2] counter: Simplify the count_read and count_write callbacks
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v4 2/2] docs: driver-api: generic-counter: Update Count and Signal data types
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v4 0/2] Simplify count_read/count_write/signal_read
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2] iio: srf04: fix wrong limitation in distance measuring
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2] dt-bindings: iio: maxbotix,mb1232.yaml: transform to yaml
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 13/13] iio: imu: st_lsm6dsx: enable wake-up event for LSM6DSO
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 12/13] dt-bindings: iio: imu: st_lsm6dsx: document missing wakeup-source property
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 11/13] iio: imu: st_lsm6dsx: add missing kernel documenation
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 10/13] iio: imu: st_lsm6dsx: add wakeup_source in st_sensors_platform_data
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 09/13] iio: imu: st_lsm6dsx: fix checkpatch warning
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 08/13] iio: imu: st_lsm6dsx: grab conf mutex in st_lsm6dsx_write_event_config
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 07/13] iio: imu: st_lsm6dsx: rely on st_lsm6dsx_update_bits_locked configuring events
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 06/13] iio: imu: st_lsm6dsx: always check enable_reg in st_lsm6dsx_event_setup
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 05/13] iio: imu: st_lsm6dsx: move bdu/boot and reset register info in hw_settings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 04/13] iio: imu: st_lsm6dsx: do not access active-low/open-drain regs if not supported
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 03/13] iio: imu: st_lsm6dsx: move irq related definitions in irq_config
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 02/13] iio: imu: st_lsm6dsx: add sanity check for read_fifo pointer
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 01/13] iio: imu: st_lsm6dsx: use st_lsm6dsx_read_locked in st_lsm6dsx_report_motion_event
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 00/13] various st_lsm6dsx fixes and missing bits
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 0/7 v3] AB8500 GPADC MFD to IIO conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/7 v3] mfd: ab8500: augment DT bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: temperature: Add support for LTC2983
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 7/7] dt-bindings: iio: adc: max1027: Document max12xx series compatibles
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/7] iio: adc: max1027: Introduce 12-bit devices support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/7] iio: adc: max1027: Prepare the introduction of different resolutions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/7] iio: adc: max1027: Make it optional to use interrupts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/7] iio: adc: max1027: Add debugfs register read support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: iio: adc: exynos: Use defines instead of clock numbers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: samsung: Indent examples with four spaces
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: ad7192: Fix Regulator Properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: pressure: bmp280: use devm action and remove labels from probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: pressure: bmp280: remove stray newline
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: pressure: bmp280: use devm_iio_device_register()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Adding "fault count" support to opt3001
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: sc27xx: Use devm_hwspin_lock_request_specific() to simplify code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 10/10] iio: imu: adis16480: use state lock for filter freq set
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/10] iio: gyro: adis16136: rework locks using ADIS library's state lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/10] iio: imu: adis16400: rework locks using ADIS library's state lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/10] iio: imu: adis: group single conversion under a single state lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/10] iio: imu: adis: protect initial startup routine with state lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/10] iio: imu: adis: create an unlocked version of adis_reset()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/10] iio: imu: adis: create an unlocked version of adis_check_status()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/10] iio: imu: adis[16480]: group RW into a single lock in adis_enable_irq()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/10] iio: imu: adis: add unlocked read/write function versions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/10] iio: imu: adis: rename txrx_lock -> state_lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/10] iio: imu: adis: rename txrx_lock -> state_lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: adis16480: clean up a condition
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: gyro: clean up indentation issue
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] counter: stm32: clean up indentation issue
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Simplify count_read/count_write/signal_read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: (bma400) add driver for the BMA400
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: max31856: add support for runtime-configuring the thermocouple type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: max31856: add support for configuring the HW averaging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: max31856: add option for setting mains filter rejection frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] counter: stm32: clean up indentation issue
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v3 0/2] Simplify count_read/count_write/signal_read
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] iio: Fix an undefied reference error in noa1305_probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 13/13] iio: cros_ec: Use Hertz as unit for sampling frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 12/13] iio: cros_ec: Report hwfifo_watermark_max
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 11/13] iio: cros_ec: Expose hwfifo_timeout
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 10/13] iio: cros_ec: Use triggered buffer only when EC does not support FIFO
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/13] platform: chrome: sensorhub: Add median filter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/13] platform: chrome: sensorhub: Add code to spread timestmap
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/13] platform: chrome: sensorhub: Add FIFO support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/13] platform: chrome: sensorhub: Add FIFO support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/13] platform: chrome: cros_ec: handle MKBP more events flag
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/13] platform: chrome: cros-ec: record event timestamp in the hard irq
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/13] platform/mfd:iio: cros_ec: Register sensor through sensorhub
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/13] cros_ec: Add sensorhub driver and FIFO processing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/13] platform: cros_ec: Add cros_ec_sensor_hub driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/13] platform: cros_ec: Add cros_ec_sensor_hub driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/13] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: opt3001: fix mutex unlock race
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: core: Add optional symbolic label to device attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-binding: iio: Add optional label property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: gyro: adis16080: replace mlock with own lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad7303: replace mlock with own lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: gyro: adis16260: remove indio_dev mlock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: gyro: adis16260: remove indio_dev mlock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Simplify count_read/count_write/signal_read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] counter: stm32-lptimer-cnt: fix a kernel-doc warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: fix a kernel-doc warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v2 2/3] dt-bindings: iio: light: add veml6030 ALS bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v2 3/3] iio: documentation: light: Add veml6030 sysfs documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v2 0/3] Add driver for veml6030 ambient light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v2 1/3] iio: light: add driver for veml6030 ambient light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] io: imu: Add support for the FXOS8700 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: gyro: adis16130: remove mlock usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ad799x: fix probe error handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: LSM9DS1 testing with st_lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH 2/2] iio: light: add missing vcnl4040 of_compatible
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: fix vcnl4000 devicetree hooks
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] MAINTAINERS: add entry for ROHM BH1750 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: bh1750: convert bindings to yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: bh1750: convert bindings to yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/7] iio: imu: inv_mpu6050: disable i2c mux for MPU925x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 5/5] iio: imu: st_lsm6dsx: add motion report function and call from interrupt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 4/5] iio: imu: st_lsm6dsx: always enter interrupt thread
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 3/5] iio: imu: st_lsm6dsx: add wakeup-source option
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 2/5] iio: imu: st_lsm6dsx: add motion events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: LSM9DS1 testing with st_lsm6dsx driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 7/7] iio: imu: inv_mpu6050: add fifo support for magnetometer data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/7] iio: imu: inv_mpu6050: add MPU925x magnetometer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/7] iio: imu: inv_mpu6050: helpers for using i2c master on auxiliary bus
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/7] iio: imu: inv_mpu6050: fix objects syntax in Makefile
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/7] iio: imu: inv_mpu6050: add defines for supporting 9-axis chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/7] iio: imu: inv_mpu6050: add header include protection macro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/7] iio: imu: inv_mpu6050: disable i2c mux for MPU925x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: axp288: Override TS pin bias current for some models
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: ad7949: fix channels mixups
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 1/2] iio: temperature: Add support for LTC2983
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• Re: [PATCH] iio: adc: add support for Intel ADC
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• RE: [PATCH v6 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v2 1/7] iio: adc: max1027: Add debugfs register read support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 2/7] iio: adc: max1027: Make it optional to use interrupts
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 0/7] Introduce max12xx ADC support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 5/7] iio: adc: max1027: Introduce 12-bit devices support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 6/7] dt-bindings: iio: adc: max1027: Mark interrupts as optional
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 7/7] dt-bindings: iio: adc: max1027: Document max12xx series compatibles
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 4/7] iio: adc: max1027: Prepare the introduction of different resolutions
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 3/7] iio: adc: max1027: Reset the device at probe time
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: Patch ping
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: add support for Intel ADC
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: add support for Intel ADC
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] iio: adc: add support for Intel ADC
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [RFC/PATCHv2 2/2] counter: introduce support for Intel QEP Encoder
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [RFC/PATCHv2 2/2] counter: introduce support for Intel QEP Encoder
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: ad7192: Fix DTC warning in the example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: ad7192: Fix Regulator Properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/2] counter: introduce support for Intel QEP Encoder
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v3 1/2] counter: add support for Quadrature x4 with swapped inputs
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 4/4] dt-bindings: iio: adc: exynos: Use defines instead of clock numbers
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 3/4] dt-bindings: rtc: s3c: Include generic dt-schema bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 2/4] dt-bindings: rtc: s3c: Use defines instead of clock numbers
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: samsung: Indent examples with four spaces
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: ad7192: Fix DTC warning in the example
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: ad7192: Fix Regulator Properties
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH V4 4/4] dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: maxbotix,mb1232.yaml: transform to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [RESEND PATCH v2 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH 4/7] iio: adc: max1027: Prepare the introduction of different resolutions
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 2/7] iio: adc: max1027: Make it optional to use interrupts
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 7/7] dt-bindings: iio: adc: max1027: Document max12xx series compatibles
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 6/7] dt-bindings: iio: adc: max1027: Mark interrupts as optional
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 5/7] iio: adc: max1027: Introduce 12-bit devices support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 3/7] iio: adc: max1027: Reset the device at probe time
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 4/7] iio: adc: max1027: Prepare the introduction of different resolutions
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 1/7] iio: adc: max1027: Add debugfs register read support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 0/7] Introduce max12xx ADC support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [RESEND PATCH v2 1/2] iio: temperature: Add support for LTC2983
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• [PATCH 3/4] iio: pressure: bmp280: remove stray newline
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 4/4] iio: pressure: bmp280: use devm action and remove labels from probe
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 2/4] iio: pressure: bmp280: use devm_iio_device_register()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 0/4] iio: pressure: bmp280: code shrink
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] iio: trigger: stm32-timer: fix the usage of uninitialized variables
  • From: Benjamin GAIGNARD <benjamin.gaignard@xxxxxx>
• Re: [RFC/PATCHv2 2/2] counter: introduce support for Intel QEP Encoder
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 7/7 v3] mfd: Switch the AB8500 GPADC to IIO
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 6/7 v3] iio: adc: New driver for the AB8500 GPADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 5/7 v3] mfd: ab8500: augment DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 4/7 v3] hwmon: ab8500: convert to IIO ADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/7 v3] power: supply: ab8500_fg: convert to IIO ADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/7 v3] power: supply: ab8500_charger: convert to IIO ADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/7 v3] power: supply: ab8500_btemp: convert to IIO ADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/7 v3] AB8500 GPADC MFD to IIO conversion
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: imu: add fxos8700 imu binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 06/13] platform: chrome: cros_ec: handle MKBP more events flag
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 05/13] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 04/13] platform: chrome: cros-ec: record event timestamp in the hard irq
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 02/13] platform: cros_ec: Add cros_ec_sensor_hub driver
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v3 2/2] counter: introduce support for Intel QEP Encoder
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• [PATCH v3 1/2] counter: add support for Quadrature x4 with swapped inputs
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• [PATCH v2] iio: adc: add support for Intel ADC
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Variables could be uninitalized if regmap_read() fails
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v2 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v2 1/2] iio: temperature: Add support for LTC2983
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: imx25-gcq: Variable could be uninitialized if regmap_read() fails
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Patch ping
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: imx25-gcq: fix uninitialized variable usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: trigger: stm32-timer: fix the usage of uninitialized variables
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: meson-saradc: Variables could be uninitalized if regmap_read() fails
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: imx25-gcq: fix uninitialized variable usage
  • From: Yizhuo <yzhai003@xxxxxxx>
• [PATCH] iio: trigger: stm32-timer: fix the usage of uninitialized variables
  • From: Yizhuo <yzhai003@xxxxxxx>
• Re: [PATCH 01/13] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH 01/13] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [RESEND PATCH v2 1/2] iio: temperature: Add support for LTC2983
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [RESEND PATCH v2 2/2] dt-bindings: iio: Add ltc2983 documentation
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• Re: [PATCH] iio: adc: imx25-gcq: Variable could be uninitialized if regmap_read() fails
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: Variables could be uninitalized if regmap_read() fails
  • From: Yizhuo <yzhai003@xxxxxxx>
• Re: [RFC/PATCHv2 2/2] counter: introduce support for Intel QEP Encoder
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: meson-saradc: Variables could be uninitalized if regmap_read() fails
  • From: Yizhuo Zhai <yzhai003@xxxxxxx>
• [PATCH] iio: adc: meson-saradc: Variables could be uninitalized if regmap_read() fails
  • From: Yizhuo <yzhai003@xxxxxxx>
• Re: [RFC/PATCHv2 2/2] counter: introduce support for Intel QEP Encoder
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] iio: adc: meson-saradc: Variables could be uninitalized if regmap_read() fails
  • From: Nicholas Mc Guire <der.herr@xxxxxxx>
• [PATCH] iio: adc: meson-saradc: Variables could be uninitalized if regmap_read() fails
  • From: Yizhuo <yzhai003@xxxxxxx>
• [PATCH] iio: adc: imx25-gcq: Variable could be uninitialized if regmap_read() fails
  • From: Yizhuo <yzhai003@xxxxxxx>
• Adding "fault count" support to opt3001
  • From: David Frey <dpfrey@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-binding: iio: Add optional label property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: adc: add support for Intel ADC
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• [PATCH] iio: adc: sc27xx: Use devm_hwspin_lock_request_specific() to simplify code
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH] iio: imu: adis16480: clean up a condition
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 03/10] iio: imu: adis[16480]: group RW into a single lock in adis_enable_irq()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 05/10] iio: imu: adis: create an unlocked version of adis_reset()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 01/10] iio: imu: adis: rename txrx_lock -> state_lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 02/10] iio: imu: adis: add unlocked read/write function versions
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 09/10] iio: gyro: adis16136: rework locks using ADIS library's state lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 08/10] iio: imu: adis16400: rework locks using ADIS library's state lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 10/10] iio: imu: adis16480: use state lock for filter freq set
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 06/10] iio: imu: adis: protect initial startup routine with state lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 07/10] iio: imu: adis: group single conversion under a single state lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 04/10] iio: imu: adis: create an unlocked version of adis_check_status()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 00/10] iio: imu: adis: cleanup lock usage
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: imu: adis16480: clean up a condition
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v4 02/19] spi: introduce spi_delay struct as "value + unit" & spi_delay_exec()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 06/19] spi: spidev: use new `word_delay` field for spi transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 12/19] spi: spi-loopback-test: use new `delay` field
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 11/19] spi: tegra20-sflash: use to new `spi_transfer_delay_exec`
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 09/19] spi: use new `spi_transfer_delay_exec` helper where straightforward
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 08/19] spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 13/19] spi: spidev: use new `delay` field for spi transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 18/19] spi: bcm63xx: extend error condition to `delay` as well
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 17/19] spi: spi-falcon: extend warning to `delay` as well
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 16/19] spi: spi-fsl-espi: convert transfer delay to `spi_delay` format
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 19/19] spi: spi-axi: extend support for the `delay` field
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 15/19] spi: implement SW control for CS times
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 14/19] spi: tegra114: change format for `spi_set_cs_timing()` function
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 10/19] spi: tegra114: use `spi_transfer_delay_exec` helper
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 07/19] spi: core,atmel: convert `word_delay_usecs` -> `word_delay` for spi_device
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 05/19] spi: orion: use new `word_delay` field for SPI transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 04/19] spi: sprd: convert transfer word delay to spi_delay struct
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 03/19] spi: make `cs_change_delay` the first user of the `spi_delay` logic
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 00/19] spi: introduce `struct spi_delay` data-type
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 01/19] spi: move `cs_change_delay` backwards compat logic outside switch
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: imu: adis16480: clean up a condition
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: fix a kernel-doc warning
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] counter: stm32-lptimer-cnt: fix a kernel-doc warning
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: fix a kernel-doc warning
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: Hardware prerequisites for driver development
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• RE: [PATCH v6 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH] iio: gyro: clean up indentation issue
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] counter: stm32: clean up indentation issue
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: Hardware prerequisites for driver development
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Hardware prerequisites for driver development
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• [PATCH 1/1] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH 0/1] iio: add driver for Bosch BMA400 accelerometer
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [RFC/PATCHv2 2/2] counter: introduce support for Intel QEP Encoder
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: LSM9DS1 testing with st_lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: LSM9DS1 testing with st_lsm6dsx driver
  • From: Bobby Jones <rjones@xxxxxxxxxxxxx>
• Re: LSM9DS1 testing with st_lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: LSM9DS1 testing with st_lsm6dsx driver
  • From: Bobby Jones <rjones@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] counter: cros_ec: Add synchronization sensor
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 1/1] counter: cros_ec: Add synchronization sensor
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: st_lsm6dsx: do not access active-low/open-drain regs if not supported
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: imu: st_lsm6dsx: add sanity check for read_fifo pointer
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 2/3] iio: imu: st_lsm6dsx: do not access active-low/open-drain regs if not supported
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 1/3] iio: imu: st_lsm6dsx: move irq related definitions in irq_config
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [RFC/PATCH 1/2] counter: add support for Quadrature x4 with swapped inputs
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [RFC/PATCHv2 2/2] counter: introduce support for Intel QEP Encoder
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [RFC/PATCHv2 2/2] counter: introduce support for Intel QEP Encoder
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [RESEND PATCH v2 3/3] iio: documentation: light: Add veml6030 sysfs documentation
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• [RESEND PATCH v2 2/3] dt-bindings: iio: light: add veml6030 ALS bindings
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• [RESEND PATCH v2 1/3] iio: light: add driver for veml6030 ambient light sensor
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• [RESEND PATCH v2 0/3] Add driver for veml6030 ambient light sensor
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• Re: [RFC/PATCHv2 2/2] counter: introduce support for Intel QEP Encoder
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: LSM9DS1 testing with st_lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: LSM9DS1 testing with st_lsm6dsx driver
  • From: Bobby Jones <rjones@xxxxxxxxxxxxx>
• [PATCH] dt-bindings: iio: maxbotix,mb1232.yaml: transform to yaml
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Travelling without laptop
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] iio: max31856: add support for runtime-configuring the thermocouple type
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [PATCH 2/3] iio: max31856: add support for configuring the HW averaging
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [PATCH 1/3] iio: max31856: add option for setting mains filter rejection frequency
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [PATCH 0/3] iio: max31856: provide more configuration options
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH 4/4] iio: ad7949: fix channels mixups
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH 1/2] iio: temperature: Add support for LTC2983
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• [PATCH] iio: Fix an undefied reference error in noa1305_probe
  • From: zhong jiang <zhongjiang@xxxxxxxxxx>
• Re: [RFC/PATCHv2 2/2] counter: introduce support for Intel QEP Encoder
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 01/13] mfd: cros_ec: Add sensor_count and make check_features public
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 07/13] platform: chrome: sensorhub: Add FIFO support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 04/13] platform: chrome: cros-ec: record event timestamp in the hard irq
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 08/13] platform: chrome: sensorhub: Add code to spread timestmap
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 09/13] platform: chrome: sensorhub: Add median filter
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 13/13] iio: cros_ec: Use Hertz as unit for sampling frequency
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 12/13] iio: cros_ec: Report hwfifo_watermark_max
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 11/13] iio: cros_ec: Expose hwfifo_timeout
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 10/13] iio: cros_ec: Use triggered buffer only when EC does not support FIFO
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>