Re: [PATCH v3 2/2] iio: srf04: add power management feature

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 20 Jan 2020 17:45:41 +0100
Andreas Klinger <ak@xxxxxxxxxxxxx> wrote:

> Add suspend and resume operations for being used by optional power
> management.
> 
> The suspend function is switching off an GPIO which can be used by the
> hardware to switch power off. The resume function is switching the GPIO
> on and sleeps an adjustable time to give the device a chance to be up
> and running.
> 
> If activated the driver gets into autosuspend after some time of
> inactivity.
> 
> Suggested-by: Franz Parzer <rpi-receiver@xxxxxxxxxxxxxxx>
> Signed-off-by: Andreas Klinger <ak@xxxxxxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to poke at it.

Thanks,

Jonathan

> ---
>  drivers/iio/proximity/srf04.c | 96 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 95 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/proximity/srf04.c b/drivers/iio/proximity/srf04.c
> index 01eb8cc63076..568b76e06385 100644
> --- a/drivers/iio/proximity/srf04.c
> +++ b/drivers/iio/proximity/srf04.c
> @@ -45,6 +45,7 @@
>  #include <linux/sched.h>
>  #include <linux/interrupt.h>
>  #include <linux/delay.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/iio/iio.h>
>  #include <linux/iio/sysfs.h>
>  
> @@ -56,6 +57,7 @@ struct srf04_data {
>  	struct device		*dev;
>  	struct gpio_desc	*gpiod_trig;
>  	struct gpio_desc	*gpiod_echo;
> +	struct gpio_desc	*gpiod_power;
>  	struct mutex		lock;
>  	int			irqnr;
>  	ktime_t			ts_rising;
> @@ -63,6 +65,7 @@ struct srf04_data {
>  	struct completion	rising;
>  	struct completion	falling;
>  	const struct srf04_cfg	*cfg;
> +	int			startup_time_ms;
>  };
>  
>  static const struct srf04_cfg srf04_cfg = {
> @@ -97,6 +100,9 @@ static int srf04_read(struct srf04_data *data)
>  	u64 dt_ns;
>  	u32 time_ns, distance_mm;
>  
> +	if (data->gpiod_power)
> +		pm_runtime_get_sync(data->dev);
> +
>  	/*
>  	 * just one read-echo-cycle can take place at a time
>  	 * ==> lock against concurrent reading calls
> @@ -110,6 +116,11 @@ static int srf04_read(struct srf04_data *data)
>  	udelay(data->cfg->trigger_pulse_us);
>  	gpiod_set_value(data->gpiod_trig, 0);
>  
> +	if (data->gpiod_power) {
> +		pm_runtime_mark_last_busy(data->dev);
> +		pm_runtime_put_autosuspend(data->dev);
> +	}
> +
>  	/* it should not take more than 20 ms until echo is rising */
>  	ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
>  	if (ret < 0) {
> @@ -268,6 +279,22 @@ static int srf04_probe(struct platform_device *pdev)
>  		return PTR_ERR(data->gpiod_echo);
>  	}
>  
> +	data->gpiod_power = devm_gpiod_get_optional(dev, "power",
> +								GPIOD_OUT_LOW);
> +	if (IS_ERR(data->gpiod_power)) {
> +		dev_err(dev, "failed to get power-gpios: err=%ld\n",
> +						PTR_ERR(data->gpiod_power));
> +		return PTR_ERR(data->gpiod_power);
> +	}
> +	if (data->gpiod_power) {
> +
> +		if (of_property_read_u32(dev->of_node, "startup-time-ms",
> +						&data->startup_time_ms))
> +			data->startup_time_ms = 100;
> +		dev_dbg(dev, "using power gpio: startup-time-ms=%d\n",
> +							data->startup_time_ms);
> +	}
> +
>  	if (gpiod_cansleep(data->gpiod_echo)) {
>  		dev_err(data->dev, "cansleep-GPIOs not supported\n");
>  		return -ENODEV;
> @@ -296,14 +323,81 @@ static int srf04_probe(struct platform_device *pdev)
>  	indio_dev->channels = srf04_chan_spec;
>  	indio_dev->num_channels = ARRAY_SIZE(srf04_chan_spec);
>  
> -	return devm_iio_device_register(dev, indio_dev);
> +	ret = iio_device_register(indio_dev);
> +	if (ret < 0) {
> +		dev_err(data->dev, "iio_device_register: %d\n", ret);
> +		return ret;
> +	}
> +
> +	if (data->gpiod_power) {
> +		pm_runtime_set_autosuspend_delay(data->dev, 1000);
> +		pm_runtime_use_autosuspend(data->dev);
> +
> +		ret = pm_runtime_set_active(data->dev);
> +		if (ret) {
> +			dev_err(data->dev, "pm_runtime_set_active: %d\n", ret);
> +			iio_device_unregister(indio_dev);
> +		}
> +
> +		pm_runtime_enable(data->dev);
> +		pm_runtime_idle(data->dev);
> +	}
> +
> +	return ret;
>  }
>  
> +static int srf04_remove(struct platform_device *pdev)
> +{
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +	struct srf04_data *data = iio_priv(indio_dev);
> +
> +	iio_device_unregister(indio_dev);
> +
> +	if (data->gpiod_power) {
> +		pm_runtime_disable(data->dev);
> +		pm_runtime_set_suspended(data->dev);
> +	}
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused srf04_pm_runtime_suspend(struct device *dev)
> +{
> +	struct platform_device *pdev = container_of(dev,
> +						struct platform_device, dev);
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +	struct srf04_data *data = iio_priv(indio_dev);
> +
> +	gpiod_set_value(data->gpiod_power, 0);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused srf04_pm_runtime_resume(struct device *dev)
> +{
> +	struct platform_device *pdev = container_of(dev,
> +						struct platform_device, dev);
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +	struct srf04_data *data = iio_priv(indio_dev);
> +
> +	gpiod_set_value(data->gpiod_power, 1);
> +	msleep(data->startup_time_ms);
> +
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops srf04_pm_ops = {
> +	SET_RUNTIME_PM_OPS(srf04_pm_runtime_suspend,
> +				srf04_pm_runtime_resume, NULL)
> +};
> +
>  static struct platform_driver srf04_driver = {
>  	.probe		= srf04_probe,
> +	.remove		= srf04_remove,
>  	.driver		= {
>  		.name		= "srf04-gpio",
>  		.of_match_table	= of_srf04_match,
> +		.pm		= &srf04_pm_ops,
>  	},
>  };
>  




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux