Re: [PATCH v4 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 6, 2020 at 4:53 PM Jeremy Fertic <jeremyfertic@xxxxxxxxx> wrote:
>
> On Wed, Feb 05, 2020 at 10:13:30PM -0800, Matt Ranostay wrote:
> > Sensors don't actually need a interrupt line to give valid readings,
> > and can triggered with CONFIG_IIO_HRTIMER_TRIGGER as well. Remove
> > the required check for interrupt, and continue along in the probe
> > function.
> >
> > Signed-off-by: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
> > ---
> >  drivers/iio/chemical/atlas-sensor.c | 27 ++++++++++++---------------
> >  1 file changed, 12 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/iio/chemical/atlas-sensor.c b/drivers/iio/chemical/atlas-sensor.c
> > index 2f0a6fed2589..2e34c82cb65d 100644
> > --- a/drivers/iio/chemical/atlas-sensor.c
> > +++ b/drivers/iio/chemical/atlas-sensor.c
> > @@ -572,11 +572,6 @@ static int atlas_probe(struct i2c_client *client,
> >       if (ret)
> >               return ret;
> >
> > -     if (client->irq <= 0) {
> > -             dev_err(&client->dev, "no valid irq defined\n");
> > -             return -EINVAL;
> > -     }
> > -
> >       ret = chip->calibration(data);
> >       if (ret)
> >               return ret;
> > @@ -596,16 +591,18 @@ static int atlas_probe(struct i2c_client *client,
> >
> >       init_irq_work(&data->work, atlas_work_handler);
> >
> > -     /* interrupt pin toggles on new conversion */
> > -     ret = devm_request_threaded_irq(&client->dev, client->irq,
> > -                                     NULL, atlas_interrupt_handler,
> > -                                     IRQF_TRIGGER_RISING |
> > -                                     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > -                                     "atlas_irq",
> > -                                     indio_dev);
> > -     if (ret) {
> > -             dev_err(&client->dev, "request irq (%d) failed\n", client->irq);
> > -             goto unregister_buffer;
> > +     if (client->irq <= 0) {
>
> Should this be > 0 ?
>

Ah yes good catch :/

- Matt

> Jeremy
>
> > +             /* interrupt pin toggles on new conversion */
> > +             ret = devm_request_threaded_irq(&client->dev, client->irq,
> > +                             NULL, atlas_interrupt_handler,
> > +                             IRQF_TRIGGER_RISING |
> > +                             IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > +                             "atlas_irq",
> > +                             indio_dev);
> > +
> > +             if (ret)
> > +                     dev_warn(&client->dev,
> > +                             "request irq (%d) failed\n", client->irq);
> >       }
> >
> >       ret = atlas_set_powermode(data, 1);
> > --
> > 2.20.1
> >



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux