AL3010 is fairly simple chip, so for suspend is enough to disable and
later enable it again.
Reviewed-by: Dmitry Osipenko <digetx@xxxxxxxxx>
Tested-by: Dmitry Osipenko <digetx@xxxxxxxxx>
Signed-off-by: David Heidelberg <david@xxxxxxx>
---
drivers/iio/light/al3010.c | 30 +++++++++++++++++++++++++-----
1 file changed, 25 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/light/al3010.c b/drivers/iio/light/al3010.c
index 4b951c087c83..202f25b595c8 100644
--- a/drivers/iio/light/al3010.c
+++ b/drivers/iio/light/al3010.c
@@ -8,6 +8,9 @@
* IIO driver for AL3010 (7-bit I2C slave address 0x1C).
*
* TODO: interrupt support, thresholds
+ * When the driver will get support for interrupt handling, then interrupt
+ * will need to be disabled before turning sensor OFF in order to avoid
+ * potential races with the interrupt handling.
*/
#include <linux/i2c.h>
@@ -71,13 +74,18 @@ static const struct attribute_group al3010_attribute_group = {
.attrs = al3010_attributes,
};
+static int al3010_set_pwr(struct i2c_client *client, bool pwr)
+{
+ u8 val = pwr ? AL3010_CONFIG_ENABLE : AL3010_CONFIG_DISABLE;
+ return i2c_smbus_write_byte_data(client, AL3010_REG_SYSTEM, val);
+}
+
static int al3010_init(struct al3010_data *data)
{
int ret;
- /* power on */
- ret = i2c_smbus_write_byte_data(data->client, AL3010_REG_SYSTEM,
- AL3010_CONFIG_ENABLE);
+ ret = al3010_set_pwr(data->client, true);
+
if (ret < 0)
return ret;
@@ -185,10 +193,21 @@ static int al3010_probe(struct i2c_client *client,
static int al3010_remove(struct i2c_client *client)
{
- return i2c_smbus_write_byte_data(client, AL3010_REG_SYSTEM,
- AL3010_CONFIG_DISABLE);
+ return al3010_set_pwr(client, false);
}
+static int __maybe_unused al3010_suspend(struct device *dev)
+{
+ return al3010_set_pwr(to_i2c_client(dev), false);
+}
+
+static int __maybe_unused al3010_resume(struct device *dev)
+{
+ return al3010_set_pwr(to_i2c_client(dev), true);
+}
+
+SIMPLE_DEV_PM_OPS(al3010_pm_ops, al3010_suspend, al3010_resume);
+
static const struct i2c_device_id al3010_id[] = {
{"al3010", 0},
{}
@@ -205,6 +224,7 @@ static struct i2c_driver al3010_driver = {
.driver = {
.name = AL3010_DRV_NAME,
.of_match_table = al3010_of_match,
+ .pm = &al3010_pm_ops,
},
.probe = al3010_probe,
.remove = al3010_remove,
--
2.25.0
