Based on: - 3320A in-kernel driver - https://www.spinics.net/lists/linux-iio/msg25145.html - https://lore.kernel.org/patchwork/patch/684179/ I decided to keep it aside of AL3320A due to different approach and much simpler design of 3010. Tested on Nexus 7 2012 (grouper/tilapia). Tested-by: David Heidelberg <david@xxxxxxx> Tested-by: Dmitry Osipenko <digetx@xxxxxxxxx> Signed-off-by: David Heidelberg <david@xxxxxxx> --- drivers/iio/light/Kconfig | 10 ++ drivers/iio/light/Makefile | 1 + drivers/iio/light/al3010.c | 217 +++++++++++++++++++++++++++++++++++++ 3 files changed, 228 insertions(+) create mode 100644 drivers/iio/light/al3010.c diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 9968f982fbc7..43d9b830279d 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -43,6 +43,16 @@ config ADUX1020 To compile this driver as a module, choose M here: the module will be called adux1020. +config AL3010 + tristate "AL3010 ambient light sensor" + depends on I2C + help + Say Y here if you want to build a driver for the Dyna Image AL3010 + ambient light sensor. + + To compile this driver as a module, choose M here: the + module will be called al3010. + config AL3320A tristate "AL3320A ambient light sensor" depends on I2C diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index c98d1cefb861..88bb93550fcc 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_ACPI_ALS) += acpi-als.o obj-$(CONFIG_ADJD_S311) += adjd_s311.o obj-$(CONFIG_ADUX1020) += adux1020.o +obj-$(CONFIG_AL3010) += al3010.o obj-$(CONFIG_AL3320A) += al3320a.o obj-$(CONFIG_APDS9300) += apds9300.o obj-$(CONFIG_APDS9960) += apds9960.o diff --git a/drivers/iio/light/al3010.c b/drivers/iio/light/al3010.c new file mode 100644 index 000000000000..4b951c087c83 --- /dev/null +++ b/drivers/iio/light/al3010.c @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * AL3010 - Dyna Image Ambient Light Sensor + * + * Copyright (c) 2014, Intel Corporation. + * Copyright (c) 2016, Dyna-Image Corp. + * + * IIO driver for AL3010 (7-bit I2C slave address 0x1C). + * + * TODO: interrupt support, thresholds + */ + +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define AL3010_DRV_NAME "al3010" + +#define AL3010_REG_SYSTEM 0x00 +#define AL3010_REG_DATA_LOW 0x0c +#define AL3010_REG_CONFIG 0x10 + +#define AL3010_CONFIG_DISABLE 0x00 +#define AL3010_CONFIG_ENABLE 0x01 + +#define AL3010_GAIN_SHIFT 4 +#define AL3010_GAIN_MASK (BIT(6) | BIT(5) | BIT(4)) + +#define AL3010_GAIN_READ(g) \ + (((g) & AL3010_GAIN_MASK) >> AL3010_GAIN_SHIFT) + +#define AL3010_GAIN_WRITE(g) \ + (((g) << AL3010_GAIN_SHIFT) & AL3010_GAIN_MASK) + +#define AL3010_SCALE_AVAILABLE "1.1872 0.2968 0.0742 0.018" + +enum al3xxxx_range { + AL3XXX_RANGE_1, /* 77806 lx */ + AL3XXX_RANGE_2, /* 19542 lx */ + AL3XXX_RANGE_3, /* 4863 lx */ + AL3XXX_RANGE_4 /* 1216 lx */ +}; + +static const int al3010_scales[][2] = { + {0, 1187200}, {0, 296800}, {0, 74200}, {0, 18600} +}; + +struct al3010_data { + struct i2c_client *client; +}; + +static const struct iio_chan_spec al3010_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + } +}; + +static IIO_CONST_ATTR(in_illuminance_scale_available, AL3010_SCALE_AVAILABLE); + +static struct attribute *al3010_attributes[] = { + &iio_const_attr_in_illuminance_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group al3010_attribute_group = { + .attrs = al3010_attributes, +}; + +static int al3010_init(struct al3010_data *data) +{ + int ret; + + /* power on */ + ret = i2c_smbus_write_byte_data(data->client, AL3010_REG_SYSTEM, + AL3010_CONFIG_ENABLE); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(data->client, AL3010_REG_CONFIG, + AL3010_GAIN_WRITE(AL3XXX_RANGE_3)); + if (ret < 0) + return ret; + + return 0; +} + +static int al3010_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct al3010_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + /* + * ALS ADC value is stored in two adjacent registers: + * - low byte of output is stored at AL3010_REG_DATA_LOW + * - high byte of output is stored at AL3010_REG_DATA_LOW + 1 + */ + ret = i2c_smbus_read_word_data(data->client, + AL3010_REG_DATA_LOW); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + ret = i2c_smbus_read_byte_data(data->client, + AL3010_REG_CONFIG); + if (ret < 0) + return ret; + + ret = AL3010_GAIN_READ(ret); + *val = al3010_scales[ret][0]; + *val2 = al3010_scales[ret][1]; + + return IIO_VAL_INT_PLUS_MICRO; + } + return -EINVAL; +} + +static int al3010_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct al3010_data *data = iio_priv(indio_dev); + int i; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + for (i = 0; i < ARRAY_SIZE(al3010_scales); i++) { + if (val != al3010_scales[i][0] || + val2 != al3010_scales[i][1]) + continue; + + return i2c_smbus_write_byte_data(data->client, + AL3010_REG_CONFIG, + AL3010_GAIN_WRITE(i)); + } + break; + } + return -EINVAL; +} + +static const struct iio_info al3010_info = { + .read_raw = al3010_read_raw, + .write_raw = al3010_write_raw, + .attrs = &al3010_attribute_group, +}; + +static int al3010_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct al3010_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &al3010_info; + indio_dev->name = AL3010_DRV_NAME; + indio_dev->channels = al3010_channels; + indio_dev->num_channels = ARRAY_SIZE(al3010_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = al3010_init(data); + if (ret < 0) { + dev_err(&client->dev, "al3010 chip init failed\n"); + return ret; + } + return devm_iio_device_register(&client->dev, indio_dev); +} + +static int al3010_remove(struct i2c_client *client) +{ + return i2c_smbus_write_byte_data(client, AL3010_REG_SYSTEM, + AL3010_CONFIG_DISABLE); +} + +static const struct i2c_device_id al3010_id[] = { + {"al3010", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, al3010_id); + +static const struct of_device_id al3010_of_match[] = { + { .compatible = "dynaimage,al3010", }, + {}, +}; +MODULE_DEVICE_TABLE(of, al3010_of_match); + +static struct i2c_driver al3010_driver = { + .driver = { + .name = AL3010_DRV_NAME, + .of_match_table = al3010_of_match, + }, + .probe = al3010_probe, + .remove = al3010_remove, + .id_table = al3010_id, +}; +module_i2c_driver(al3010_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@xxxxxxx>"); +MODULE_DESCRIPTION("AL3010 Ambient Light Sensor driver"); +MODULE_LICENSE("GPL v2"); -- 2.25.0
