These patches implement support for simple iio light sensor AL3010 and also improves and align formating of AL3320a which is origin of al3010 driver. AL3010 is used in many devices, mostly tegra2/3 based. This effort is aimed for reducing number of out-of-tree patches for tegra tablets and phones. This sensor is tested on Nexus 7 (2012, grouper/tilapia). v4 - incorporated previously proposed changes David Heidelberg (7): dt-bindings: iio: light: add support for Dyna-Image AL3320A dt-bindings: iio: light: add support for Dyna-Image AL3010 iio: light: al3320a slightly improve code formatting iio: light: add Dyna-Image AL3010 driver iio: light: al3320a implement suspend support iio: light: al3320a implement devm_add_action_or_reset iio: light: al3320a allow module autoload and polish .../devicetree/bindings/iio/light/al3010.yaml | 45 ++++ .../bindings/iio/light/al3320a.yaml | 45 ++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/iio/light/Kconfig | 10 + drivers/iio/light/Makefile | 1 + drivers/iio/light/al3010.c | 240 ++++++++++++++++++ drivers/iio/light/al3320a.c | 72 ++++-- 7 files changed, 398 insertions(+), 17 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/light/al3010.yaml create mode 100644 Documentation/devicetree/bindings/iio/light/al3320a.yaml create mode 100644 drivers/iio/light/al3010.c -- 2.25.0
