This adds device tree bindings for the GP2AP002 light and proximity sensor. As with other early proximity sensors (~2010) the light sensor and proximity sensors were combined into a single component. Cc: Stephan Gerhold <stephan@xxxxxxxxxxx> Cc: Minkyu Kang <mk7.kang@xxxxxxxxxxx> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx> Cc: Jonathan Bakker <xc-racer2@xxxxxxx> Cc: Oskar Andero <oskar.andero@xxxxxxxxx> Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- ChangeLog v4->v5: - Collected Rob's Reviewed-by tag. ChangeLog v3->v4: - Resend with the changes in the main patch. ChangeLog v1->v3: - Drop the maxitems on the supplies, it is already 1 - Drop quotes around "alsout" - Limit the sharp hysteresis to 8 bits as it should be - Use /bits/ 8 in the example so it is correct --- .../bindings/iio/light/sharp,gp2ap002.yaml | 85 +++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml diff --git a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml new file mode 100644 index 000000000000..12aa16f24772 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/sharp,gp2ap002.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp GP2AP002A00F and GP2AP002S00F proximity and ambient light sensors + +maintainers: + - Linus Walleij <linus.walleij@xxxxxxxxxx> + +description: | + Proximity and ambient light sensor with IR LED for the proximity + sensing and an analog output for light intensity. The ambient light + sensor output is not available on the GP2AP002S00F variant. + +properties: + compatible: + enum: + - sharp,gp2ap002a00f + - sharp,gp2ap002s00f + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: an interrupt for proximity, usually a GPIO line + + vdd-supply: + description: VDD power supply a phandle to a regulator + + vio-supply: + description: VIO power supply a phandle to a regulator + + io-channels: + maxItems: 1 + description: ALSOUT ADC channel to read the ambient light + + io-channel-names: + const: alsout + + sharp,proximity-far-hysteresis: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + Hysteresis setting for "far" object detection, this setting is + device-unique and adjust the optical setting for proximity detection + of a "far away" object in front of the sensor. + + sharp,proximity-close-hysteresis: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + Hysteresis setting for "close" object detection, this setting is + device-unique and adjust the optical setting for proximity detection + of a "close" object in front of the sensor. + +required: + - compatible + - reg + - interrupts + - sharp,proximity-far-hysteresis + - sharp,proximity-close-hysteresis + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@44 { + compatible = "sharp,gp2ap002a00f"; + reg = <0x44>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vdd_regulator>; + vio-supply = <&vio_regulator>; + io-channels = <&adc_channel>; + io-channel-names = "alsout"; + sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>; + sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>; + }; + }; + +... -- 2.21.0
