The following changes since commit e895bc1ebb31750f3baa74e074617d3cc5d0cee2:
staging: vc04_services: remove header include path to vc04_services (2020-01-10 17:33:41 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.6b
for you to fetch changes up to d344961f55fd6321937d3bc92ad3930dea31189f:
iio: dac: stm32-dac: better handle reset controller failures (2020-01-18 14:32:01 +0000)
----------------------------------------------------------------
Second set of new device support, features and minor fixes for IIO in the 5.6 cycle
Just a small set this time.
As we are very near the merge window, I've rolled a few fixes in here
rather than adding noise just before release. A short delay here will
do little harm.
New device support
* adis16480
- Add support for adis16490. After earlier rework this is simple ID plus
chip info.
Features
* kxcjk1013
- mount matrix support.
* lsm_6dsx
- mount matrix support.
Cleanups / minor or late breaking fixes
* ad7124
- add support to ad-sigma-delta and use it in this driver to allow
the the interrupt type to be IRQF_TRIGGER_LOW unlike most other devices
using this framework.
* adis
- use delay structure now available in SPI to handle transfer delays
- introduce a timeouts structure to allow support of new devices
* ak8975
- drop platform data support. No one is using it and it adds complexity.
- use device_get_match_data rather than open coding much the same thing.
* dht11
- drop meaningless todo
* at91-samad2_adc
- switch to dma_request_chan
* altas-sensor
- add a helper function to compute number of channels. Needed for new device
support that is under review.
* bma400
- add a lower bound check on scale.
* inv_mpu6050
- add support for temperature data in the fifos for all chips.
- support an odd situation where a board supports only interrupt triggering
on both edges.
* st_lsm6dsx
- check and handle potential error return.
* st_sensors
- fix some values for the LSM9DS0 which is ever so slightly different from
other devices using the same whoami value.
- switch over to generic functions from dt ones, avoiding need for separate
ACPI support.
* stm32-adc
- switch to dma_request_chan
- suppress an error print in deferred probe case.
* stm32-dac
- drop private data structure element for reset controller as only used in
probe.
- reflect more cleanly that the reset controller is optional whilst ensuring
that if is specified any errors are caught.
* stm32-dfsdm
- switch to dma_request_chan
- fix missing application of formatting to single conversions.
- ensure the sampling rate is updated when the oversampling ratio is changed.
----------------------------------------------------------------
Alexandru Ardelean (2):
iio: imu: adis: use new `delay` structure for SPI transfer delays
dt-bindings: iio: adis16480: add compatible entry for ADIS16490
Alexandru Tachici (2):
iio: adc: ad-sigma-delta: Allow custom IRQ flags
iio: adc: ad7124: Set IRQ type to falling
Andy Shevchenko (5):
iio: st_gyro: Correct data for LSM9DS0 gyro
iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()
iio: st_sensors: Make use of device properties
iio: magnetometer: ak8975: Get rid of platform data
iio: magnetometer: ak8975: Convert to use device_get_match_data()
Dan Carpenter (1):
iio: accel: bma400: prevent setting accel scale too low
Dmitry Osipenko (2):
iio: accel: kxcjk1013: Support orientation matrix
dt-bindings: iio: accel: kxcjk1013: Document mount-matrix property
Etienne Carriere (3):
iio: adc: stm32-adc: don't print an error on probe deferral
iio: dac: stm32-dac: use reset controller only at probe time
iio: dac: stm32-dac: better handle reset controller failures
Jean-Baptiste Maneyrol (1):
iio: imu: inv_mpu6050: add fifo temperature data support
Kent Gustavsson (1):
iio: humidity: dht11 remove TODO since it doesn't make sense
Lorenzo Bianconi (1):
iio: imu: st_lsm6dsx: check return value from st_lsm6dsx_sensor_set_enable
Martin Kepplinger (1):
iio: imu: st_lsm6dsx: add mount matrix support
Matt Ranostay (1):
iio: chemical: atlas-sensor: add helper function atlas_buffer_num_channels()
Michał Mirosław (1):
iio: imu/mpu6050: support dual-edge IRQ
Nuno Sá (2):
iio: adis: Introduce timeouts structure
iio: adis: Remove startup_delay
Olivier Moysan (2):
iio: adc: stm32-dfsdm: fix single conversion
iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratio
Peter Ujfalusi (3):
iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()
iio: adc: stm32-adc: Use dma_request_chan() instead dma_request_slave_channel()
iio: adc: at91-sama5d2_adc: Use dma_request_chan() instead dma_request_slave_channel()
Stefan Popa (1):
iio: imu: adis16480: Add support for ADIS16490
.../bindings/iio/accel/kionix,kxcjk1013.txt | 7 +
.../devicetree/bindings/iio/imu/adi,adis16480.txt | 1 +
drivers/iio/accel/adis16201.c | 8 +-
drivers/iio/accel/adis16209.c | 8 +-
drivers/iio/accel/bma400_core.c | 3 +-
drivers/iio/accel/kxcjk-1013.c | 27 ++-
drivers/iio/accel/st_accel_i2c.c | 6 +-
drivers/iio/accel/st_accel_spi.c | 9 +-
drivers/iio/adc/ad7124.c | 2 +
drivers/iio/adc/ad7780.c | 1 +
drivers/iio/adc/ad7791.c | 1 +
drivers/iio/adc/ad7793.c | 1 +
drivers/iio/adc/ad_sigma_delta.c | 2 +-
drivers/iio/adc/at91-sama5d2_adc.c | 6 +-
drivers/iio/adc/stm32-adc-core.c | 9 +-
drivers/iio/adc/stm32-adc.c | 16 +-
drivers/iio/adc/stm32-dfsdm-adc.c | 55 ++++--
drivers/iio/chemical/atlas-sensor.c | 13 +-
drivers/iio/common/st_sensors/st_sensors_core.c | 45 ++---
drivers/iio/common/st_sensors/st_sensors_i2c.c | 21 ---
drivers/iio/common/st_sensors/st_sensors_spi.c | 12 +-
drivers/iio/dac/stm32-dac-core.c | 19 +-
drivers/iio/gyro/adis16136.c | 41 ++++-
drivers/iio/gyro/adis16260.c | 8 +-
drivers/iio/gyro/st_gyro_core.c | 75 +++++++-
drivers/iio/gyro/st_gyro_i2c.c | 9 +-
drivers/iio/gyro/st_gyro_spi.c | 9 +-
drivers/iio/humidity/dht11.c | 1 -
drivers/iio/imu/adis.c | 45 +++--
drivers/iio/imu/adis16400.c | 64 ++++++-
drivers/iio/imu/adis16460.c | 7 +
drivers/iio/imu/adis16480.c | 75 +++++++-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 202 ++++++++-------------
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 22 +--
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 11 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 3 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 19 ++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 11 +-
drivers/iio/magnetometer/ak8975.c | 53 ++----
drivers/iio/magnetometer/st_magn_i2c.c | 9 +-
drivers/iio/magnetometer/st_magn_spi.c | 9 +-
drivers/iio/pressure/st_pressure_i2c.c | 20 +-
drivers/iio/pressure/st_pressure_spi.c | 9 +-
drivers/staging/iio/accel/adis16203.c | 8 +-
drivers/staging/iio/accel/adis16240.c | 8 +-
include/linux/iio/accel/kxcjk_1013.h | 3 +
include/linux/iio/adc/ad_sigma_delta.h | 2 +
include/linux/iio/common/st_sensors.h | 12 +-
include/linux/iio/common/st_sensors_i2c.h | 10 -
include/linux/iio/imu/adis.h | 14 +-
include/linux/iio/magnetometer/ak8975.h | 15 --
51 files changed, 645 insertions(+), 401 deletions(-)
delete mode 100644 include/linux/iio/magnetometer/ak8975.h
