On Wed, 5 Feb 2020 22:13:31 -0800 Matt Ranostay <matt.ranostay@xxxxxxxxxxxx> wrote: > Atlas Scientific DO-SM OEM sensor reads disolved oxygen in > a solution. This is reported back as mg/L which maps direc > to ppm and so the IIO_CONCENTRATION channel type can be used. > > Signed-off-by: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx> Hi Matt, This looks good to me. Will pick up once we've resolved the other bits in the series. Also want to give time for Rob to take a look a the yaml. Thanks, Jonathan > --- > drivers/iio/chemical/atlas-sensor.c | 64 +++++++++++++++++++++++++++-- > 1 file changed, 60 insertions(+), 4 deletions(-) > > diff --git a/drivers/iio/chemical/atlas-sensor.c b/drivers/iio/chemical/atlas-sensor.c > index 2e34c82cb65d..919d408869be 100644 > --- a/drivers/iio/chemical/atlas-sensor.c > +++ b/drivers/iio/chemical/atlas-sensor.c > @@ -48,6 +48,11 @@ > #define ATLAS_REG_EC_CALIB_STATUS_LOW BIT(2) > #define ATLAS_REG_EC_CALIB_STATUS_HIGH BIT(3) > > +#define ATLAS_REG_DO_CALIB_STATUS 0x09 > +#define ATLAS_REG_DO_CALIB_STATUS_MASK 0x03 > +#define ATLAS_REG_DO_CALIB_STATUS_PRESSURE BIT(0) > +#define ATLAS_REG_DO_CALIB_STATUS_DO BIT(1) > + > #define ATLAS_REG_PH_TEMP_DATA 0x0e > #define ATLAS_REG_PH_DATA 0x16 > > @@ -60,14 +65,19 @@ > #define ATLAS_REG_ORP_CALIB_STATUS 0x0d > #define ATLAS_REG_ORP_DATA 0x0e > > +#define ATLAS_REG_DO_TEMP_DATA 0x12 > +#define ATLAS_REG_DO_DATA 0x22 > + > #define ATLAS_PH_INT_TIME_IN_MS 450 > #define ATLAS_EC_INT_TIME_IN_MS 650 > #define ATLAS_ORP_INT_TIME_IN_MS 450 > +#define ATLAS_DO_INT_TIME_IN_MS 450 > > enum { > ATLAS_PH_SM, > ATLAS_EC_SM, > ATLAS_ORP_SM, > + ATLAS_DO_SM, > }; > > struct atlas_data { > @@ -121,7 +131,7 @@ static const struct iio_chan_spec atlas_ph_channels[] = { > }, > }; > > -#define ATLAS_EC_CHANNEL(_idx, _addr) \ > +#define ATLAS_CONCENTRATION_CHANNEL(_idx, _addr) \ > {\ > .type = IIO_CONCENTRATION, \ > .indexed = 1, \ > @@ -152,8 +162,8 @@ static const struct iio_chan_spec atlas_ec_channels[] = { > .endianness = IIO_BE, > }, > }, > - ATLAS_EC_CHANNEL(0, ATLAS_REG_TDS_DATA), > - ATLAS_EC_CHANNEL(1, ATLAS_REG_PSS_DATA), > + ATLAS_CONCENTRATION_CHANNEL(0, ATLAS_REG_TDS_DATA), > + ATLAS_CONCENTRATION_CHANNEL(1, ATLAS_REG_PSS_DATA), > IIO_CHAN_SOFT_TIMESTAMP(3), > { > .type = IIO_TEMP, > @@ -182,6 +192,19 @@ static const struct iio_chan_spec atlas_orp_channels[] = { > IIO_CHAN_SOFT_TIMESTAMP(1), > }; > > +static const struct iio_chan_spec atlas_do_channels[] = { > + ATLAS_CONCENTRATION_CHANNEL(0, ATLAS_REG_DO_DATA), > + IIO_CHAN_SOFT_TIMESTAMP(1), > + { > + .type = IIO_TEMP, > + .address = ATLAS_REG_DO_TEMP_DATA, > + .info_mask_separate = > + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), > + .output = 1, > + .scan_index = -1 > + }, > +}; > + > static int atlas_check_ph_calibration(struct atlas_data *data) > { > struct device *dev = &data->client->dev; > @@ -262,7 +285,31 @@ static int atlas_check_orp_calibration(struct atlas_data *data) > dev_warn(dev, "device has not been calibrated\n"); > > return 0; > -}; > +} Unrelated change so really should have been in a separate patch, but meh it's trivial so I won't fuss too much about it being here ;) > + > +static int atlas_check_do_calibration(struct atlas_data *data) > +{ > + struct device *dev = &data->client->dev; > + int ret; > + unsigned int val; > + > + ret = regmap_read(data->regmap, ATLAS_REG_DO_CALIB_STATUS, &val); > + if (ret) > + return ret; > + > + if (!(val & ATLAS_REG_DO_CALIB_STATUS_MASK)) { > + dev_warn(dev, "device has not been calibrated\n"); > + return 0; > + } > + > + if (!(val & ATLAS_REG_DO_CALIB_STATUS_PRESSURE)) > + dev_warn(dev, "device missing atmospheric pressure calibration\n"); > + > + if (!(val & ATLAS_REG_DO_CALIB_STATUS_DO)) > + dev_warn(dev, "device missing dissolved oxygen calibration\n"); > + > + return 0; > +} > > struct atlas_device { > const struct iio_chan_spec *channels; > @@ -295,6 +342,13 @@ static struct atlas_device atlas_devices[] = { > .calibration = &atlas_check_orp_calibration, > .delay = ATLAS_ORP_INT_TIME_IN_MS, > }, > + [ATLAS_DO_SM] = { > + .channels = atlas_do_channels, > + .num_channels = 3, > + .data_reg = ATLAS_REG_DO_DATA, > + .calibration = &atlas_check_do_calibration, > + .delay = ATLAS_DO_INT_TIME_IN_MS, > + }, > }; > > static int atlas_set_powermode(struct atlas_data *data, int on) > @@ -507,6 +561,7 @@ static const struct i2c_device_id atlas_id[] = { > { "atlas-ph-sm", ATLAS_PH_SM}, > { "atlas-ec-sm", ATLAS_EC_SM}, > { "atlas-orp-sm", ATLAS_ORP_SM}, > + { "atlas-do-sm", ATLAS_DO_SM}, > {} > }; > MODULE_DEVICE_TABLE(i2c, atlas_id); > @@ -515,6 +570,7 @@ static const struct of_device_id atlas_dt_ids[] = { > { .compatible = "atlas,ph-sm", .data = (void *)ATLAS_PH_SM, }, > { .compatible = "atlas,ec-sm", .data = (void *)ATLAS_EC_SM, }, > { .compatible = "atlas,orp-sm", .data = (void *)ATLAS_ORP_SM, }, > + { .compatible = "atlas,do-sm", .data = (void *)ATLAS_DO_SM, }, > { } > }; > MODULE_DEVICE_TABLE(of, atlas_dt_ids);