Show by using a corresponding API call that GPIO is optional.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/iio/pressure/bmp280-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 25be3ff1a6ab..6c2e47d92a11 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -1080,9 +1080,9 @@ int bmp280_common_probe(struct device *dev,
usleep_range(data->start_up_time, data->start_up_time + 100);
/* Bring chip out of reset if there is an assigned GPIO line */
- gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
/* Deassert the signal */
- if (!IS_ERR(gpiod)) {
+ if (gpiod) {
dev_info(dev, "release reset\n");
gpiod_set_value(gpiod, 0);
}
--
2.25.1
