On Wed, 4 Mar 2020 15:55:44 +0200 Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> wrote: > While adding a new device, I noticed these aren't sorted alphabetically [as > in the Makefile], which messed my head-up. > This change sorts the devices alphabetically in the drivers/iio/dac/Kconfig > file as well. > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> oops. That clearly snuck past when I wasn't paying attention. Good to clean it up. Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to hopefully not notice! Thanks, Jonathan > --- > drivers/iio/dac/Kconfig | 62 ++++++++++++++++++++--------------------- > 1 file changed, 31 insertions(+), 31 deletions(-) > > diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig > index 63916a6142ec..93744011b63f 100644 > --- a/drivers/iio/dac/Kconfig > +++ b/drivers/iio/dac/Kconfig > @@ -121,27 +121,6 @@ config AD5624R_SPI > Say yes here to build support for Analog Devices AD5624R, AD5644R and > AD5664R converters (DAC). This driver uses the common SPI interface. > > -config LTC1660 > - tristate "Linear Technology LTC1660/LTC1665 DAC SPI driver" > - depends on SPI > - help > - Say yes here to build support for Linear Technology > - LTC1660 and LTC1665 Digital to Analog Converters. > - > - To compile this driver as a module, choose M here: the > - module will be called ltc1660. > - > -config LTC2632 > - tristate "Linear Technology LTC2632-12/10/8 and LTC2636-12/10/8 DAC spi driver" > - depends on SPI > - help > - Say yes here to build support for Linear Technology > - LTC2632-12, LTC2632-10, LTC2632-8, LTC2636-12, LTC2636-10 and > - LTC2636-8 converters (DAC). > - > - To compile this driver as a module, choose M here: the > - module will be called ltc2632. > - > config AD5686 > tristate > > @@ -240,16 +219,6 @@ config AD7303 > To compile this driver as module choose M here: the module will be called > ad7303. > > -config CIO_DAC > - tristate "Measurement Computing CIO-DAC IIO driver" > - depends on X86 && (ISA_BUS || PC104) > - select ISA_BUS_API > - help > - Say yes here to build support for the Measurement Computing CIO-DAC > - analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The > - base port addresses for the devices may be configured via the base > - array module parameter. > - > config AD8801 > tristate "Analog Devices AD8801/AD8803 DAC driver" > depends on SPI_MASTER > @@ -260,6 +229,16 @@ config AD8801 > To compile this driver as a module choose M here: the module will be called > ad8801. > > +config CIO_DAC > + tristate "Measurement Computing CIO-DAC IIO driver" > + depends on X86 && (ISA_BUS || PC104) > + select ISA_BUS_API > + help > + Say yes here to build support for the Measurement Computing CIO-DAC > + analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The > + base port addresses for the devices may be configured via the base > + array module parameter. > + > config DPOT_DAC > tristate "DAC emulation using a DPOT" > depends on OF > @@ -289,6 +268,27 @@ config LPC18XX_DAC > To compile this driver as a module, choose M here: the module will be > called lpc18xx_dac. > > +config LTC1660 > + tristate "Linear Technology LTC1660/LTC1665 DAC SPI driver" > + depends on SPI > + help > + Say yes here to build support for Linear Technology > + LTC1660 and LTC1665 Digital to Analog Converters. > + > + To compile this driver as a module, choose M here: the > + module will be called ltc1660. > + > +config LTC2632 > + tristate "Linear Technology LTC2632-12/10/8 and LTC2636-12/10/8 DAC spi driver" > + depends on SPI > + help > + Say yes here to build support for Linear Technology > + LTC2632-12, LTC2632-10, LTC2632-8, LTC2636-12, LTC2636-10 and > + LTC2636-8 converters (DAC). > + > + To compile this driver as a module, choose M here: the > + module will be called ltc2632. > + > config M62332 > tristate "Mitsubishi M62332 DAC driver" > depends on I2C
