Linux IIO Development

• Thread Index

• Re: [PATCH v1 1/3] iio: st_lsm6dsx: Mark predefined constants with __maybe_unused
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: add support for Dynament Premier series single gas sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: add support for Dynament Premier series single gas sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: at91-sama5d2_adc: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: ad7923: Add of_device_id table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: adc: ad7923: Fix checkpatch warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: adc: ad7923: Remove the unused defines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/4] iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: light: vcnl4000: Fix scale for vcnl4040
  • From: Guido Günther <agx@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: Introduce the TI DAC8771 DAC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-binding: iio: dac8771: Add TI DAC8771 binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 00/12] add header file for kelvin to/from Celsius conversion helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH v1] iio: st_gyro: Correct data for LSM9DS0 gyro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/10] iio: adc: at91-sama5d2_adc: implement RTC triggering
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/10] iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/10] iio: adc: at91-sama5d2_adc: handle unfinished conversions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/10] iio: trigger: at91-rtc-trigger: introduce at91 rtc adc trigger driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/10] dt-bindings: iio: trigger: at91-rtc-trigger: add bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/10] dt-bindings: iio: adc: at91-sama5d2: add rtc-trigger optional property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/10] iio: adc: at91-sama5d2_adc: update for other trigger usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: frequency: adf4371: Introduce channel child nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-binding: iio: Add documentation for ADF4371 channel child notes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: frequency: Add docs for LTC6952
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: frequency: ltc6952: Add support for LTC6952
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 3/3] iio: (bma400) basic regulator support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 2/3] iio: (bma400) add driver for the BMA400
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 1/3] dt-bindings: iio: accel: bma400: add bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v8 2/3] iio: (bma400) add driver for the BMA400
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v8 3/3] iio: (bma400) basic regulator support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v8 2/3] iio: (bma400) add driver for the BMA400
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v8 1/3] dt-bindings: iio: accel: bma400: add bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v8 3/3] iio: (bma400) basic regulator support
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v8 2/3] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v8 1/3] dt-bindings: iio: accel: bma400: add bindings
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v8 0/3] iio: add driver for Bosch BMA400 accelerometer
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/3] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 3/3] iio: (bma400) basic regulator support
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: Let's design the next-gen libiio!
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.14 02/19] iio: adc: max9611: Fix too short conversion time delay
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 14/52] iio: st_accel: Fix unused variable warning
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 06/34] iio: adc: max9611: Fix too short conversion time delay
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 15/52] iio: adc: max9611: Fix too short conversion time delay
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: ad7192: Fix DTC error in reg schema
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH] iio: adc: ad7124: Fix DT channel configuration
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• Re: [PATCH v7 2/3] iio: (bma400) add driver for the BMA400
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 2/3] iio: (bma400) add driver for the BMA400
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v7 2/3] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH 4/4] iio: accel: bma180: BMA254 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 3/3] iio: (bma400) basic regulator support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.4 105/350] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.4 019/350] iio: tcs3414: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH 2/3] iio: frequency: ltc6952: Add support for LTC6952
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 3/3] MAINTAINNERS: add entry for LTC6952 driver
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: frequency: Add docs for LTC6952
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 3/3] dt-binding: iio: Add documentation for ADF4371 channel child notes
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 2/3] iio: frequency: adf4371: Introduce channel child nodes
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 1/3] iio: frequency: adf4371: Create a power down/up function
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PATCH v7 3/3] iio: (bma400) basic regulator support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 2/3] iio: (bma400) add driver for the BMA400
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH v7 3/3] iio: (bma400) basic regulator support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v7 2/3] iio: (bma400) add driver for the BMA400
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: iio: accel: bma400: add bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v7 2/3] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v7 3/3] iio: (bma400) basic regulator support
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v7 2/3] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v7 1/3] dt-bindings: iio: accel: bma400: add bindings
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v7 0/3] iio: add driver for Bosch BMA400 accelerometer
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: convert sd modulator to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: iio: accel: bma400: add bindings
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: iio: accel: bma400: add bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: iio: accel: bma400: add bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 08/10] iio: adc: at91-sama5d2_adc: implement RTC triggering
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH 09/10] ARM: dts: at91: sama5d2: add rtc_adc_trigger node
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH 10/10] ARM: dts: at91: sama5d2_xplained: enable rtc_adc_trigger
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH 06/10] iio: adc: at91-sama5d2_adc: handle unfinished conversions
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH 07/10] iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH 03/10] dt-bindings: iio: trigger: at91-rtc-trigger: add bindings
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH 05/10] iio: trigger: at91-rtc-trigger: introduce at91 rtc adc trigger driver
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH 01/10] iio: adc: at91-sama5d2_adc: update for other trigger usage
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH 02/10] dt-bindings: iio: adc: at91-sama5d2: add rtc-trigger optional property
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH 00/10] Enhancements to at91-sama5d2_adc and rtc trigger
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: add support for Dynament Premier series single gas sensor
  • From: YuDong Zhang <mtwget@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: add support for Dynament Premier series single gas sensor
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: add support for Dynament Premier series single gas sensor
  • From: ruantu <mtwget@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: add support for Dynament Premier series single gas sensor
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v1] iio: st_gyro: Correct data for LSM9DS0 gyro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: core: print error message on debugfs register failure
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: core: print error message on debugfs register failure
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] dt-binding: iio: dac8771: Add TI DAC8771 binding
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 2/2] iio: dac: Introduce the TI DAC8771 DAC driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 0/2] Texas Instruments DAC8771
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v3 4/4] iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: ad7923: Add of_device_id table
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: adc: ad7923: Fix checkpatch warning
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: adc: ad7923: Remove the unused defines
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v3 4/4] iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928
  • From: Daniel Junho <djunho@xxxxxxxxx>
• [PATCH v3 3/4] iio: adc: ad7923: Add of_device_id table
  • From: Daniel Junho <djunho@xxxxxxxxx>
• [PATCH v3 2/4] iio: adc: ad7923: Fix checkpatch warning
  • From: Daniel Junho <djunho@xxxxxxxxx>
• [PATCH v3 1/4] iio: adc: ad7923: Remove the unused defines
  • From: Daniel Junho <djunho@xxxxxxxxx>
• [PATCH v3 0/4] Add support for the ad7908/ad7918/ad7928
  • From: Daniel Junho <djunho@xxxxxxxxx>
• Re: [PATCH] iio: adc: at91: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2] iio: adc: at91-sama5d2_adc: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: chemical: Add bindings for Dynament Premier series single gas sensor
  • From: YuDong Zhang <mtwget@xxxxxxxxx>
• [PATCH v2 1/2] iio: chemical: add support for Dynament Premier series single gas sensor
  • From: YuDong Zhang <mtwget@xxxxxxxxx>
• Re: [PATCH] iio: adc: at91: Use dma_request_chan() instead dma_request_slave_channel()
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH] iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] iio: adc: stm32-adc: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] iio: adc: at91: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v3 3/3] bindings: iio: pressure: Add dlh-i2c documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v1 2/3] iio: st_lsm6dsx: Drop unneeded OF code
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/3] iio: st_lsm6dsx: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/3] iio: st_lsm6dsx: Mark predefined constants with __maybe_unused
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 8/9] iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/9] iio: light: st_uvis25: Drop unneeded header inclusion
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 6/9] iio: pressure: st_press: Mark default_press_pdata with __maybe_unused
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 9/9] iio: st_sensors: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 7/9] iio: st_sensors: Describe function parameters in kernel-doc
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/9] iio: accel: st_accel: Drop unnecessary #else branch for ACPI
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 5/9] iio: accel: st_accel: Mark default_accel_pdata with __maybe_unused
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 4/9] iio: gyro: st_gyro: Mark gyro_pdata with __maybe_unused
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/9] iio: pressure: st_press: Drop unnecessary #else branch for ACPI
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v4 01/12] add helpers for kelvin to/from Celsius conversion
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v2] iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928
  • From: Daniel Junho <djunho@xxxxxxxxx>
• [PATCH] iio: light: remove unneeded semicolon
  • From: Chen Zhou <chenzhou10@xxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: adc: new driver to support Linear technology's ltc2496
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: buffer: align the size of scan bytes to size of the largest element
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.4 137/350] iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: gyro: adi16136: construct adis data on probe vs static on driver
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: core: use debugfs_remove_recursive() on IIO unload
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: chemical: atlas-ph-sensor: rename atlas-ph-sensor to atlas-sensor
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.4 105/350] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• RE: [PATCH v3] iio: buffer: align the size of scan bytes to size of the largest element
  • From: Lars Möllendorf <lars.moellendorf@xxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: chemical: Add bindings for Dynament Premier series single gas sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: chemical: add support for Dynament Premier series single gas sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: (bma400) add driver for the BMA400
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: use debugfs_remove_recursive() on IIO unload
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: gyro: adi16136: construct adis data on probe vs static on driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.4 192/350] iio: dln2-adc: fix iio_triggered_buffer_postenable() position
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.4 137/350] iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.4 117/350] iio: dac: ad7303: replace mlock with own lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.4 105/350] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.4 074/350] iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.4 019/350] iio: tcs3414: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: ad7923: Remove the unused defines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7124: Fix DT channel configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 12/12] iio: adc: qcom-vadc-common: use <linux/units.h> helpers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: adc: new driver to support Linear technology's ltc2496
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: adc: ltc2497: split protocol independent part in a separate module
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 08/12] thermal: remove kelvin to/from Celsius conversion helpers from <linux/thermal.h>
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 12/12] iio: adc: qcom-vadc-common: use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 11/12] thermal: armada: remove unused TO_MCELSIUS macro
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 09/12] iwlegacy: use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 10/12] iwlwifi: use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 07/12] nvme: hwmon: switch to use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 06/12] thermal: intel_pch: switch to use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 05/12] thermal: int340x: switch to use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 04/12] platform/x86: intel_menlow: switch to use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 03/12] platform/x86: asus-wmi: switch to use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 02/12] ACPI: thermal: switch to use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 01/12] add helpers for kelvin to/from Celsius conversion
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v4 00/12] add header file for kelvin to/from Celsius conversion helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH 6/6] iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 4/6] iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 5/6] iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 3/6] iio: imu: st_lsm6dsx: check if pull_up is located in primary page
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 2/6] iio: imu: st_lsm6dsx: check if master_enable is located in primary page
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/6] iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/6] introduce i2c master controller support for LSM6DSM
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] iio: chemical: pms7003: fix unmet triggered buffer dependency
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH v6 2/2] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 3/5] iio: imu: adis16480: construct adis data on probe vs static on driver
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 4/5] iio: adis: Introduce timeouts structure
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 5/5] iio: adis: Remove startup_delay
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/5] iio: gyro: adi16136: construct adis data on probe vs static on driver
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/5] iio: imu: adis16400: construct adis data on probe vs static on driver
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 2/2] Device tree bindings for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zalkonnikov <ez@xxxxxxxxxxxxx>
• [PATCH v3 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zalkonnikov <ez@xxxxxxxxxxxxx>
• [PATCH v3] iio: buffer: align the size of scan bytes to size of the largest element
  • From: Lars Möllendorf <lars.moellendorf@xxxxxxxxxx>
• Re: [PATCH v3 10/12] wireless: iwlwifi: use <linux/units.h> helpers
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH v3 02/12] ACPI: thermal: switch to use <linux/units.h> helpers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 03/12] platform/x86: asus-wmi: switch to use <linux/units.h> helpers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 03/12] platform/x86: asus-wmi: switch to use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH v3 02/12] ACPI: thermal: switch to use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: ad7192: Fix DTC error in reg schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: ad7192: Fix DTC error in reg schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCH v6 2/2] iio: (bma400) add driver for the BMA400
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: iio: accel: bma400: add bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: (bma400) add driver for the BMA400
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 09/12] wireless: iwlegacy: use <linux/units.h> helpers
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH 4/4] iio: accel: bma180: BMA254 support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/4] iio: accel: bma180: Use explicit member assignment
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/4] iio: accel: bma180: Basic regulator support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/4] iio: accel: bma180: Add dev helper variable
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: core: print error message on debugfs register failure
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v3 00/12] add header file for kelvin to/from Celsius conversion helpers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 03/12] platform/x86: asus-wmi: switch to use <linux/units.h> helpers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 02/12] ACPI: thermal: switch to use <linux/units.h> helpers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: core: use debugfs_remove_recursive() on IIO unload
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 10/12] wireless: iwlwifi: use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v3 05/12] thermal: int340x: switch to use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v3 12/12] iio: adc: qcom-vadc-common: use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v3 11/12] thermal: armada: remove unused TO_MCELSIUS macro
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v3 09/12] wireless: iwlegacy: use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v3 08/12] thermal: remove kelvin to/from Celsius conversion helpers from <linux/thermal.h>
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v3 07/12] nvme: hwmon: switch to use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v3 06/12] thermal: intel_pch: switch to use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v3 04/12] platform/x86: intel_menlow: switch to use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v3 03/12] platform/x86: asus-wmi: switch to use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v3 02/12] ACPI: thermal: switch to use <linux/units.h> helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v3 01/12] add helpers for kelvin to/from Celsius conversion
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v3 00/12] add header file for kelvin to/from Celsius conversion helpers
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: (bma400) add driver for the BMA400
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: buffer-dmaengine: Report buffer length requirements
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: adc: at91-sama5d2_adc: update for other trigger usage
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH] iio: buffer: rename 'read_first_n' callback to 'read'
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: buffer-dmaengine: Add module information
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 2/3] dt-bindings: Add asc vendor
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v4 1/3] iio: pressure: Add driver for DLH pressure sensors
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v4 3/3] bindings: iio: pressure: Add documentation for dlh driver
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v4 0/3] Add support for DLH pressure sensors
  • From: <tomislav.denis@xxxxxxx>
• Re: [PATCH v2 4/4] iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: adc: ad7923: Add of_device_id table
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: adc: ad7923: Fix checkpatch warning
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: ad7923: Remove the unused defines
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v6 2/2] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: iio: accel: bma400: add bindings
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v6 0/2] iio: add driver for Bosch BMA400 accelerometer
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.9 04/91] iio: tcs3414: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 03/91] iio: light: bh1750: Resolve compiler warning and make code more readable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 23/91] iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 30/91] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 35/91] iio: dac: ad7303: replace mlock with own lock
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 39/91] iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 02/71] iio: light: bh1750: Resolve compiler warning and make code more readable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 03/71] iio: tcs3414: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 18/71] iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 28/71] iio: dac: ad7303: replace mlock with own lock
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 27/71] iio: adc: max1027: Reset the device at probe time
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 34/91] iio: adc: max1027: Reset the device at probe time
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 003/130] iio: light: bh1750: Resolve compiler warning and make code more readable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 004/130] iio: tcs3414: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 031/130] iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 049/130] iio: adc: max1027: Reset the device at probe time
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 050/130] iio: dac: ad7303: replace mlock with own lock
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 055/130] iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 071/130] iio: dln2-adc: fix iio_triggered_buffer_postenable() position
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 043/130] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 074/350] iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 105/350] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 116/350] iio: adc: max1027: Reset the device at probe time
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 117/350] iio: dac: ad7303: replace mlock with own lock
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 004/177] iio: light: bh1750: Resolve compiler warning and make code more readable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 006/177] iio: tcs3414: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 037/177] iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 053/177] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 060/177] iio: adc: max1027: Reset the device at probe time
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 061/177] iio: dac: ad7303: replace mlock with own lock
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 070/177] iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 095/177] iio: dln2-adc: fix iio_triggered_buffer_postenable() position
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 137/177] iio: dac: ad5446: Add support for new AD5600 DAC
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 129/350] staging: iio: ad9834: add a check for devm_clk_get
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 137/350] iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 009/292] iio: light: bh1750: Resolve compiler warning and make code more readable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 014/292] iio: tcs3414: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 008/292] iio: max31856: add missing of_node and parent references to iio_dev
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 192/350] iio: dln2-adc: fix iio_triggered_buffer_postenable() position
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 266/350] iio: dac: ad5446: Add support for new AD5600 DAC
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 268/350] iio: adis16480: Fix scales factors
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 260/350] iio: cros_ec_baro: set info_mask_shared_by_all_available field
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 256/350] iio: imu: st_lsm6dsx: fix ODR check in st_lsm6dsx_write_raw
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 011/350] iio: max31856: add missing of_node and parent references to iio_dev
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 012/350] iio: light: bh1750: Resolve compiler warning and make code more readable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 019/350] iio: tcs3414: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: a1: add saradc controller
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• [PATCH v2 4/4] iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928
  • From: Daniel Junho <djunho@xxxxxxxxx>
• [PATCH v2 3/4] iio: adc: ad7923: Add of_device_id table
  • From: Daniel Junho <djunho@xxxxxxxxx>
• [PATCH v2 2/4] iio: adc: ad7923: Fix checkpatch warning
  • From: Daniel Junho <djunho@xxxxxxxxx>
• [PATCH v2 1/4] iio: adc: ad7923: Remove the unused defines
  • From: Daniel Junho <djunho@xxxxxxxxx>
• [PATCH v2 0/4] Add support for the ad7908/ad7918/ad7928
  • From: Daniel Junho <djunho@xxxxxxxxx>
• [PATCH v2] iio: imu: adis: use new `delay` structure for SPI transfer delays
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: imu: adis: use new `delay` structure for SPI transfer delays
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: adc: ad7124: Fix DT channel configuration
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: chemical: Add bindings for Dynament Premier series single gas sensor
  • From: ruantu <mtwget@xxxxxxxxx>
• [PATCH 1/2] iio: chemical: add support for Dynament Premier series single gas sensor
  • From: ruantu <mtwget@xxxxxxxxx>
• Re: [PATCH] arm64: dts: a1: add saradc controller
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• Re: [PATCH] iio:adc:ad7923: Add support for the ad7908/ad7918/ad7928
  • From: Daniel Junho <djunho@xxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: a1: add saradc controller
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v4 2/3] iio: adc: ltc2497: split protocol independent part in a separate module
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v4 3/3] iio: adc: new driver to support Linear technology's ltc2496
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v4 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v4 0/3] iio: adc: add support for ltc2496
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v1 2/2] iio: pressure: bmp280: Allow device to be enumerated from ACPI
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/2] iio: pressure: bmp280: Drop ACPI support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Let's design the next-gen libiio!
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1015: Make use of device property API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PULL] First set of IIO fixes for the 5.5 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: (bma400) add driver for the BMA400
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v5 2/2] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: accel: bma400: add bindings
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v5 0/2] iio: add driver for Bosch BMA400 accelerometer
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH v2 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v2 0/7] Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ad7292: Update SPDX identifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] First set of IIO fixes for the 5.5 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7606: fix reading unnecessary data from device
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: atlas-ph-sensor: Drop GPIO include
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] iio: humidity: hts221: move register definitions to sensor structs
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: pressure: Add driver for DLH pressure sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] bindings: iio: pressure: Add dlh-i2c documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:adc:ad7923: Add support for the ad7908/ad7918/ad7928
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: max9611: Fix too short conversion time delay
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1015: Make use of device property API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: adc: ti-ads1025: Get rid of legacy platform data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: adis: use new `delay` structure for SPI transfer delays
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads7950: Fix a typo in an error message
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: ti-ads1015: Make use of device property API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: adc: ti-ads1025: Get rid of legacy platform data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: hts221: move register definitions to sensor structs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: stm32-adc: Add check on overrun interrupt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: max9611: Fix too short conversion time delay
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ssp_sensors: Convert to use GPIO descriptors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Move AD7091R5 entry in a alphabetical order in Makefile
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: atlas-ph-sensor: Drop GPIO include
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad7266: Convert to use GPIO descriptors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad5592r: Drop surplus GPIO header
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adf4350: Convert to use GPIO descriptor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: itg3200: Drop GPIO include
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: apds9960: Drop GPIO includes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad2s1200: Drop legacy include
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 2/2] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Rodrigo Carvalho <rodrigorsdc@xxxxxxxxx>
• [PATCH v6 1/2] staging: iio: accel: adis16240: enforce SPI mode on probe function
  • From: Rodrigo Carvalho <rodrigorsdc@xxxxxxxxx>
• Re: [PATCH] iio: si1145: Drop GPIO include
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: as3935: Drop GPIO includes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: st_lsm6dsx: fix checkpatch warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ak8975: Convert to use GPIO descriptor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: ad799x: add pm_ops to disable the device completely
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: buffer: align the size of scan bytes to size of the largest element
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v2] iio: ad7949: fix channels mixups
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3] iio: adc: max9611: Fix too short conversion time delay
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2] dt-bindings: iio: adc: convert sd modulator to json-schema
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: convert sd modulator to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: ti-ads1015: Make use of device property API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 1/2] iio: adc: ti-ads1025: Get rid of legacy platform data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio:adc:ad7923: Add support for the ad7908/ad7918/ad7928
  • From: Daniel Junho <djunho@xxxxxxxxx>
• Re: [PATCH v5 2/2] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: ad7292: fix channel constraint
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: ad7292: fix channel constraint
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: adc: ad7292: Update SPDX identifier
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: ad7292: fix channel constraint
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [v2] iio: ad7949: fix channels mixups
  • From: Couret Charles-Antoine <charles-antoine.couret@xxxxxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: buffer: align the size of scan bytes to size of the largest element
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [v2] iio: ad7949: fix channels mixups
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: Add asc vendor
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v3 0/3] Add support for DLH pressure sensors
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v3 3/3] bindings: iio: pressure: Add dlh-i2c documentation
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v3 1/3] iio: pressure: Add driver for DLH pressure sensors
  • From: <tomislav.denis@xxxxxxx>
• Re: [PATCH 1/3] iio: buffer: align the size of scan bytes to size of the largest element
  • From: Lars Möllendorf <lars.moellendorf@xxxxxxxxxx>
• Re: [PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] iio: imu: adis: use new `delay` structure for SPI transfer delays
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] staging: iio: accel: adis16240: enforce SPI mode on probe function
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: adc: ti-ads7950: Fix a typo in an error message
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 2/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zalkonnikov <ez@xxxxxxxxxxxxx>
• [PATCH v1 2/2] iio: adc: ti-ads1015: Make use of device property API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/2] iio: adc: ti-ads1025: Get rid of legacy platform data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zalkonnikov <ez@xxxxxxxxxxxxx>
• [PATCH] iio: adc: Move AD7091R5 entry in a alphabetical order in Makefile
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zaikonnikov <eugene.zaikonnikov@xxxxxxxxxxxxx>
• [PATCH] arm64: dts: a1: add saradc controller
  • From: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ad7292: Update SPDX identifier
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [v2] iio: ad7949: fix channels mixups
  • From: Couret Charles-Antoine <charles-antoine.couret@xxxxxxxxxxxxx>
• Re: [PATCH] iio: ad7266: Convert to use GPIO descriptors
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: buffer: align the size of scan bytes to size of the largest element
  • From: Lars Möllendorf <lars.moellendorf@xxxxxxxxxx>
• [v2] iio: ad7949: fix channels mixups
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH 1/3] iio: buffer: align the size of scan bytes to size of the largest element
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH 1/3] iio: buffer: align the size of scan bytes to size of the largest element
  • From: Lars Möllendorf <lars.moellendorf@xxxxxxxxxx>
• Re: [PATCH] iio: ak8975: Convert to use GPIO descriptor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: ak8975: Convert to use GPIO descriptor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: humidity: hts221: move register definitions to sensor structs
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] iio: ad7266: Convert to use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: adf4350: Convert to use GPIO descriptor
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: max9611: Fix too short conversion time delay
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] iio: atlas-ph-sensor: Drop GPIO include
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: adf4350: Convert to use GPIO descriptor
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: ad5592r: Drop surplus GPIO header
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2] iio: adc: stm32-adc: Add check on overrun interrupt
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] iio: ad5592r: Drop surplus GPIO header
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2] iio: adc: max9611: Fix too short conversion time delay
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH] iio: ssp_sensors: Convert to use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: adf4350: Convert to use GPIO descriptor
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: adf4350: Convert to use GPIO descriptor
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: itg3200: Drop GPIO include
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: apds9960: Drop GPIO includes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: ad2s1200: Drop legacy include
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: si1145: Drop GPIO include
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: as3935: Drop GPIO includes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: ak8975: Convert to use GPIO descriptor
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: ad799x: add pm_ops to disable the device completely
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2] iio: imu: st_lsm6dsx: fix checkpatch warning
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: ad799x: add pm_ops to disable the device completely
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: convert sd modulator to json-schema
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: fix checkpatch warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: fix decimation factor estimation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: iio_compute_scan_bytes does not seem to account for alignment if first channel uses more storagebits than its successors
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: Select I2C_MUX again
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: iio_compute_scan_bytes does not seem to account for alignment if first channel uses more storagebits than its successors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: imu: inv_mpu6050: fix temperature reporting using bad unit
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad7887: Cleanup channel assignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] staging: iio: accel: adis16240: enforce SPI mode on probe function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: Add check on overrun interrupt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: new driver to support Linear technology's ltc2496
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] bindings: iio: pressure: Add dlh-i2c documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: Add asc vendor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: pressure: Add driver for DLH pressure sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/3] Add support for DLH pressure sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/4] iio: ping: add parallax ping sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/3] iio: light: add driver for veml6030 ambient light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: Add support for AD7091R5 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Doubts in getting started with the Analog AD7928 driver
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: Doubts in getting started with the Analog AD7928 driver
  • From: Daniel Junho <djunho@xxxxxxxxx>
• Re: iio_compute_scan_bytes does not seem to account for alignment if first channel uses more storagebits than its successors
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3] iio: adc: ad799x: add pm_ops to disable the device completely
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• iio_compute_scan_bytes does not seem to account for alignment if first channel uses more storagebits than its successors
  • From: Lars Möllendorf <lars.moellendorf@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [RFC/RFT] iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [RFC/RFT] iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: fix checkpatch warning
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 3/3] bindings: iio: pressure: Add dlh-i2c documentation
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v2 2/3] dt-bindings: Add asc vendor
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v2 1/3] iio: pressure: Add driver for DLH pressure sensors
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v2 0/3] Add support for DLH pressure sensors
  • From: <tomislav.denis@xxxxxxx>
• Re: [PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2 2/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zalkonnikov <ez@xxxxxxxxxxxxx>
• [PATCH v2 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zalkonnikov <ez@xxxxxxxxxxxxx>
• Re: Doubts in getting started with the Analog AD7928 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: Doubts in getting started with the Analog AD7928 driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [RFC/RFT] iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: Doubts in getting started with the Analog AD7928 driver
  • From: Daniel Junho <djunho@xxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: fix decimation factor estimation
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: Doubts in getting started with the Analog AD7928 driver
  • From: Daniel Junho <djunho@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad799x: add pm_ops to disable the device completely
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: Select I2C_MUX again
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad799x: add pm_ops to disable the device completely
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2] iio: imu: inv_mpu6050: Select I2C_MUX again
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: imu: inv_mpu6050: Select I2C_MUX again
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: convert sd modulator to json-schema
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• [PATCH] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2] iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratio
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2] iio: adc: stm32-dfsdm: fix single conversion
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2] iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratio
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• [PATCH v2] iio: adc: stm32-dfsdm: fix single conversion
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• [PATCH v2] iio: adc: ad799x: add pm_ops to disable the device completely
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [INTERNAL][PATCH] iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratio
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• [INTERNAL][PATCH] iio: adc: stm32-dfsdm: fix single conversion
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• [PATCH v2 1/2] iio: imu: inv_mpu6050: fix temperature reporting using bad unit
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: Problem about Read Multiple Raw Function
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Problem about Read Multiple Raw Function
  • From: Oezguen Guenyeli <oezguen.guenyeli.wg@xxxxxxxxxxx>
• Re: [PATCH] platform/chrome: cros_ec: Rename cros_ec_dev to cros_ec_mfd_dev
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2] iio: adc: ad7887: Cleanup channel assignment
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: Add support for AD7091R5 ADC
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: adc: intel_mrfld_adc: Allocating too much data in probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: Add check on overrun interrupt
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v4 3/4] iio: ping: add parallax ping sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v4 0/4] iio: add driver for ping))) and laserping sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] staging: iio: accel: adis16240: enforce SPI mode on probe function
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: new driver to support Linear technology's ltc2496
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v5 2/2] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Rodrigo Carvalho <rodrigorsdc@xxxxxxxxx>
• [PATCH v5 1/2] staging: iio: accel: adis16240: enforce SPI mode on probe function
  • From: Rodrigo Carvalho <rodrigorsdc@xxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: new driver to support Linear technology's ltc2496
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: trigger: stm32-timer: remove unnecessary update event
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7887: Cleanup channel assignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max1027: fix not unregistered iio trigger
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: add fifo temperature data support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: inv_mpu6050: fix temperature reporting using bad unit
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3] iio: adc: ad7124: Fix enabling of internal reference
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: Fix Kconfig indentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: intel_mrfld_adc: Allocating too much data in probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2] iio: adc: ad7124: Enable internal reference
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/4] MAINTAINERS: add maintainer for ping iio sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: ping: add parallax ping sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: add parallax ping sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: add vendor prefix parallax
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: dac: ad7303: use regulator get optional to check for ext supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/1] Add support for TI HDC200x humidity and temperature sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: (bma400) add driver for the BMA400
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 7/9] iio: max31856: add support for runtime-configuring the thermocouple type
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [v3 9/9] dt-bindings: iio: maxim_thermocouple: document new 'compatible' strings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 8/9] RFC/RFT: iio: maxim_thermocouple: add thermocouple_type sysfs attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 7/9] iio: max31856: add support for runtime-configuring the thermocouple type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 6/9] Documentation: ABI: document IIO thermocouple_type file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 5/9] iio: core: add thermocouple_type standard attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 4/9] RFC: iio: core: add char type for sysfs attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 3/9] iio: max31856: add support for configuring the HW averaging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 2/9] Documentation: ABI: document IIO in_temp_filter_notch_center_frequency file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 1/9] iio: max31856: add option for setting mains filter rejection frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: ad7292: fix constraint over channel quantity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ad7292: Update SPDX identifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/11] iio: imu: adis: cleanup lock usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: Add check on overrun interrupt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4] dt-bindings: iio: accel: add binding documentation for ADIS16240
  • From: Rodrigo Carvalho <rodrigorsdc@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: ad7292: fix constraint over channel quantity
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ad7292: Update SPDX identifier
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: adc: stm32-adc: Add check on overrun interrupt
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 0/1] Add support for TI HDC200x humidity and temperature sensors
  • From: Eugene Zaikonnikov <eugene.zaikonnikov@xxxxxxxxxxxxx>
• [PATCH v2 01/11] iio: imu: adis: rename txrx_lock -> state_lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 02/11] iio: imu: adis: add unlocked read/write function versions
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 08/11] iio: imu: adis16400: rework locks using ADIS library's state lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 04/11] iio: imu: adis: create an unlocked version of adis_check_status()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 10/11] iio: imu: adis16480: use state lock for filter freq set
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 07/11] iio: imu: adis: group single conversion under a single state lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 11/11] iio: gyro: adis16260: replace mlock with ADIS lib's state_lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 09/11] iio: gyro: adis16136: rework locks using ADIS library's state lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 06/11] iio: imu: adis: protect initial startup routine with state lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 05/11] iio: imu: adis: create an unlocked version of adis_reset()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 03/11] iio: imu: adis[16480]: group RW into a single lock in adis_enable_irq()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 00/11] iio: imu: adis: cleanup lock usage
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v5 09/18] platform: chrome: sensorhub: Add FIFO support
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v5 00/18] cros_ec: Add sensorhub driver and FIFO processing
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH] platform/chrome: cros_ec: Rename cros_ec_dev to cros_ec_mfd_dev
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• [PATCH] platform/chrome: cros_ec: Rename cros_ec_dev to cros_ec_mfd_dev
  • From: Raul E Rangel <rrangel@xxxxxxxxxxxx>
• [PATCH v3 2/3] iio: adc: ltc2497: split protocol independent part in a separate module
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] iio: adc: new driver to support Linear technology's ltc2496
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 0/3] iio: adc: add support for ltc2496
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
  • From: Chris Lesiak <chris.lesiak@xxxxxxxxx>
• [PATCH] iio: trigger: stm32-timer: remove unnecessary update event
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2] iio: Fix Kconfig indentation
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [v3 9/9] dt-bindings: iio: maxim_thermocouple: document new 'compatible' strings
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 8/9] RFC/RFT: iio: maxim_thermocouple: add thermocouple_type sysfs attribute
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 7/9] iio: max31856: add support for runtime-configuring the thermocouple type
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 6/9] Documentation: ABI: document IIO thermocouple_type file
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 3/9] iio: max31856: add support for configuring the HW averaging
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 5/9] iio: core: add thermocouple_type standard attribute
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 4/9] RFC: iio: core: add char type for sysfs attributes
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 2/9] Documentation: ABI: document IIO in_temp_filter_notch_center_frequency file
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 1/9] iio: max31856: add option for setting mains filter rejection frequency
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 0/9] iio: max31856: provide more configuration options
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [PATCH] iio: Fix Kconfig indentation
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] iio: adc: intel_mrfld_adc: Allocating too much data in probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: adc: intel_mrfld_adc: Allocating too much data in probe()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: Add asc vendor
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-binding: iio: Add documentation for ADM1177
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: adc: ad7887: Cleanup channel assignment
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH] iio: adc: max1027: fix not unregistered iio trigger
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH V3] iio: adc: ad7124: Fix enabling of internal reference
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: inv_mpu6050: fix temperature reporting using bad unit
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2] iio: dac: ad7303: use regulator get optional to check for ext supply
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 2/2] iio: imu: inv_mpu6050: add fifo temperature data support
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2] dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCH v3 3/3] i2c: smbus: switch from loops to memcpy
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH V2] iio: adc: ad7124: Enable internal reference
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: [PATCH v3 1/3] i2c: use void pointers for supplying data for reads and writes
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] i2c: smbus: switch from loops to memcpy
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 1/3] i2c: use void pointers for supplying data for reads and writes
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 1/3] i2c: use void pointers for supplying data for reads and writes
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] MAINTAINERS: add maintainer for ping iio sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 3/4] iio: ping: add parallax ping sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: add parallax ping sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: add vendor prefix parallax
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 0/4] iio: add driver for ping))) and laserping sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v2 -next] iio: st_accel: Fix unused variable warning
  • From: Yuehaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: (bma400) add driver for the BMA400
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: adc: ad7292: fix constraint over channel quantity
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: ad7292: Update SPDX identifier
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Make enum relations more future proof
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: add support of MPU9150 magnetometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: inv_mpu6050: delete not existing MPU9150 spi support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/4] iio: adc: Add support for AD7091R5 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/4] iio: adc: ad7091r5: Add scale and external VREF support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/4] dt-binding: iio: Add documentation for AD7091R5
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/4] MAINTAINERS: add entry for AD7091R5 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Make enum relations more future proof
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7124: Enable internal reference
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Make enum relations more future proof
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad7303: use regulator get optional to check for ext supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>