st_sensors.h contains common stm sensor definitions but in
st_lsm6dsx_shub driver it is used just to introduce the default
wai address for LIS3MDL sensor.
Drop this largely unconnected include and introduce the default wai
address in st_lsm6dsx_ext_dev_settings register map
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
---
Changes since v1:
- improve commit message
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
index 280925dd8edb..947ca3a7dcaf 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
@@ -28,7 +28,6 @@
#include <linux/iio/sysfs.h>
#include <linux/bitfield.h>
-#include <linux/iio/common/st_sensors.h>
#include "st_lsm6dsx.h"
#define ST_LSM6DSX_SLV_ADDR(n, base) ((base) + (n) * 3)
@@ -93,7 +92,7 @@ static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
{
.i2c_addr = { 0x1e },
.wai = {
- .addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+ .addr = 0x0f,
.val = 0x3d,
},
.id = ST_LSM6DSX_ID_MAGN,
--
2.25.1
