Linux IIO Development

• Thread Index

• Re: [PATCH] dt-bindings: iio: st-sensors: Add IIS2MDC magnetometer
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: st-sensors: Add IIS2MDC magnetometer
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: st-sensors: Add IIS2MDC magnetometer
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: st-sensors: Add IIS2MDC magnetometer
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: st-sensors: Add IIS2MDC magnetometer
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] dt-bindings: iio: gyroscope: bosch,bmg160: add spi-max-frequency binding
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: add ad7944 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: add ad7944 ADCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 5/5] iio: inkern: move to the cleanup.h magic
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 0/5] iio: move IIO to the cleanup.h magic
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 3/5] iio: trigger: move to the cleanup.h magic
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 4/5] iio: buffer: iio: core: move to the cleanup.h magic
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 2/5] iio: events: move to the cleanup.h magic
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH 1/5] iio: core: move to cleanup.h magic
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• Re: [PATCH v5 5/5] iio: amplifiers: hmc425a: add support for LTC6373 Instrumentation Amplifier
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/2] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] drivers: iio: pressure: Sort headers of BMPxxx SPI driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/5] iio: amplifiers: hmc425a: use pointers in match table
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v5 3/5] iio: amplifiers: hmc425a: move conversion logic
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v5 1/3] docs: iio: Refactor index.rst
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v5 3/3] docs: iio: add documentation for adis16475 driver
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v5 0/3] adis16475 driver documentation
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v5 2/3] docs: iio: add documentation for device buffers
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• Re: [PATCH v13 1/3] dt-bindings: adc: add AD7173
  • From: Ceclan Dumitru <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: iio: humidity: hdc3020: add reset-gpios
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH 2/2] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH 1/2] drivers: iio: pressure: Sort headers of BMPxxx SPI driver
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH 6.7 175/309] iio: imu: bno055: serdev requires REGMAP
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 6.6 162/331] iio: imu: bno055: serdev requires REGMAP
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] iio: humidity: hdc3020: add reset management
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 3/4] dt-bindings: iio: humidity: hdc3020: add reset-gpios
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 2/4] iio: humidity: hdc3020: add power management
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 1/4] iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 0/4] iio: humidity: hdc3020: add power and reset management
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 6.1 108/197] iio: imu: bno055: serdev requires REGMAP
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 1/3] dt-bindings: adc: add AD7173
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/2] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drivers: iio: pressure: Sort headers of BMPxxx SPI driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: add ad7944 ADCs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v13 1/3] dt-bindings: adc: add AD7173
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH 2/2] drivers: iio: pressure: Sort headers of BMPxxx SPI driver
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH 1/2] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v5 5/5] iio: amplifiers: hmc425a: add support for LTC6373 Instrumentation Amplifier
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v5 2/5] dt-bindings: iio: hmc425a: add entry for LTC6373
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v5 4/5] iio: amplifiers: hmc425a: use pointers in match table
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v5 1/5] dt-bindings: iio: hmc425a: add conditional GPIO array size constraints
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v5 3/5] iio: amplifiers: hmc425a: move conversion logic
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v5 0/5] Add support for LTC6373
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v13 3/3] iio: adc: ad7173: add AD7173 driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v13 2/3] iio: adc: ad_sigma_delta: Add optional irq selection
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v13 2/3] iio: adc: ad_sigma_delta: Add optional irq selection
  • From: Ceclan Dumitru <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v13 2/3] iio: adc: ad_sigma_delta: Add optional irq selection
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v13 3/3] iio: adc: ad7173: add AD7173 driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v13 3/3] iio: adc: ad7173: add AD7173 driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v13 3/3] iio: adc: ad7173: add AD7173 driver
  • From: Ceclan Dumitru <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v2 2/5] spi: move splitting transfers to spi_optimize_message()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 1/5] spi: add spi_optimize_message() APIs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 4/5] spi: axi-spi-engine: move message compile to optimize_message
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 5/5] iio: adc: ad7380: use spi_optimize_message()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v13 3/3] iio: adc: ad7173: add AD7173 driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v13 3/3] iio: adc: ad7173: add AD7173 driver
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v13 2/3] iio: adc: ad_sigma_delta: Add optional irq selection
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v13 1/3] dt-bindings: adc: add AD7173
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH v4 04/15] device property: Introduce device_for_each_child_node_scoped()
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 02/15] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 01/15] device property: Move fwnode_handle_put() into property.h
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 5/5] iio: adc: ad7380: use spi_optimize_message()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 4/5] spi: axi-spi-engine: move message compile to optimize_message
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 3/5] spi: stm32: move splitting transfers to optimize_message
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 1/5] spi: add spi_optimize_message() APIs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 2/5] spi: move splitting transfers to spi_optimize_message()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 0/5] spi: add support for pre-cooking messages
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] counter: constify the struct device_type usage
  • From: "Ricardo B. Marliere" <ricardo@xxxxxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ad7944: add driver for AD7944/AD7985/AD7986
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: adc: ti-ads1298: Add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v2] iio: gts-helper: Fix division loop
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/5] iio: adc: ad7192: Add AD7194 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/1] Add 10EC5280 to bmi160_i2c ACPI IDs to allow binding on some devices
  • From: Jesus Miguel Gonzalez Herrero <jesusmgh@xxxxxxxxx>
• [PATCH] drivers: iio: pressure: Fixes BMP38x and BMP390 SPI support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ad7944: add driver for AD7944/AD7985/AD7986
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 5/5] iio: adc: ad7192: Add AD7194 support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 5/5] iio: adc: ad7192: Add AD7194 support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 00/15] device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2] iio: imu: inv_mpu6050: fix FIFO parsing when empty
  • From: inv.git-commit@xxxxxxx
• Re: [PATCH v4 15/15] iio: dac: ltc2688: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2] iio: imu: inv_mpu6050: fix frequency setting when chip is off
  • From: inv.git-commit@xxxxxxx
• [PATCH v7] dt-bindings: iio: humidity: hdc20x0: add optional interrupts property
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: fix frequency setting when chip is off
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 12/15] iio: addac: ad74413r: Use device_for_each_child_node_scoped()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 05/15] iio: adc: max11410: Use device_for_each_child_node_scoped()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 03/15] iio: temp: ltc2983: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 15/15] iio: dac: ltc2688: Use device_for_each_child_node_scoped()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH] iio: imu: inv_mpu6050: fix FIFO parsing when empty
  • From: inv.git-commit@xxxxxxx
• [PATCH v2 1/2] dt-bindings: iio: ti,tmp117: add vcc supply binding
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: temperature: tmp117: add support for vcc-supply
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: adc: ti-ads1298: Add driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/8] IIO: Drop incorrect includes of linux/of.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/8] IIO: Convert DT specific handling over to fwnode
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 8/8] iio: adc: hx711: Switch from of specific to fwnode property handling.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 7/8] iio: accel: fxls8962af: Switch from of specific to fwnode based properties.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/8] iio: adc: ad7192: Convert from of specific to fwnode property handling
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/8] iio: adc: ad7124: Switch from of specific to fwnode based property handling
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/8] iio: adc: ad7124: Switch from of specific to fwnode based property handling
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: imu: inv_mpu6050: fix frequency setting when chip is off
  • From: inv.git-commit@xxxxxxx
• Re: [PATCH v4 00/15] device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 15/15] iio: dac: ltc2688: Use device_for_each_child_node_scoped()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 13/15] iio: dac: ad3552r: Use device_for_each_child_node_scoped()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 09/15] iio: adc: stm32: Use device_for_each_child_node_scoped()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [jic23-iio:testing 107/107] drivers/iio/adc/ti-ads1298.c:653:29: warning: variable 'ret' is uninitialized when used here
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 5/8] iio: adc: ad7192: Convert from of specific to fwnode property handling
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 4/8] iio: adc: ad7292: Switch from of specific to fwnode property handling
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 3/8] iio: adc: ad7124: Switch from of specific to fwnode based property handling
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 0/8] IIO: Drop incorrect includes of linux/of.h
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 04/15] device property: Introduce device_for_each_child_node_scoped()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 02/15] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 01/15] device property: Move fwnode_handle_put() into property.h
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] iio: adc: mcp320x: Simplify device removal logic
  • From: Arturas Moskvinas <arturas.moskvinas@xxxxxxxxx>
• Re: [RESEND PATCH v2] iio: gts-helper: Fix division loop
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RESEND PATCH v2] iio: gts-helper: Fix division loop
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v6 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v6 1/2] dt-bindings: iio: adc: ti-ads1298: Add bindings
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v5] iio: accel: kxcjk-1013: Implement ACPI method ROTM to retrieve mount matrix.
  • From: Sean Rhodes <sean@starlabs.systems>
• Re: [PATCH v4 2/2] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 8/8] iio: dac: mcp4821: Switch to including mod_devicetable.h for struct of_device_id definition.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 7/8] iio: accel: kxsd9: Switch from linux/of.h to linux/mod_devicetable.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 6/8] iio: accel: bma180: Switch from linux/of.h to linux/mod_devicetable.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/8] iio: light: al3010: Switch from linux/of.h to linux/mod_devicetable.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/8] iio: light: al3320a: Drop unused linux/of.h include
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 5/8] iio: accel: adxl372: Switch from linux/of.h to linux/mod_devicetable.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 4/8] iio: adc: ads8688: Switch to mod_devicetable.h for struct of_device_id definition
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/8] IIO: Drop incorrect includes of linux/of.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/8] iio: light: vl6180: Drop unused linux/of.h include
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 8/8] iio: adc: hx711: Switch from of specific to fwnode property handling.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 7/8] iio: accel: fxls8962af: Switch from of specific to fwnode based properties.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 6/8] iio: accel: mma8452: Switch from of specific to fwnode property handling.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 5/8] iio: adc: ad7192: Convert from of specific to fwnode property handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 4/8] iio: adc: ad7292: Switch from of specific to fwnode property handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/8] iio: adc: ad7124: Switch from of specific to fwnode based property handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/8] iio: adc: fsl-imx25-gcq: Use devm_* and dev_err_probe() to simplify probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/8] IIO: Convert DT specific handling over to fwnode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/8] iio: adc: fsl-imx25-gcq: Switch from of specific handing to fwnode based.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v7 5/5] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v6 4/5] dt-bindings: iio: light: Avago APDS9306
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v7 3/5] dt-bindings: iio: light: adps9300: Update interrupt definitions
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v7 2/5] dt-bindings: iio: light: adps9300: Add missing vdd-supply
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v7 1/5] dt-bindings: iio: light: Merge APDS9300 and APDS9960 schemas
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v7 0/5] Support for Avago APDS9306 Ambient Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH v2] iio: gts-helper: Fix division loop
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: Ondřej Jirman <megi@xxxxxx>
• Re: [PATCH v6 0/2] Add bmi323 support for ASUS ROG ALLY
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH v6 0/2] Add bmi323 support for ASUS ROG ALLY
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: multiple iio_devices, one shared GPIO iio_trigger
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 15/15] iio: dac: ltc2688: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 14/15] iio: dac: ad5770r: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 13/15] iio: dac: ad3552r: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 12/15] iio: addac: ad74413r: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 11/15] iio: adc: ti-ads131e08: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 10/15] iio: adc: ti-ads1015: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 09/15] iio: adc: stm32: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 08/15] iio: adc: rzg2l_adc: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 07/15] iio: adc: qcom-spmi-adc5: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 06/15] iio: adc: mcp3564: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 05/15] iio: adc: max11410: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 04/15] device property: Introduce device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 03/15] iio: temp: ltc2983: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 02/15] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 01/15] device property: Move fwnode_handle_put() into property.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 00/15] device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 04/15] device property: Introduce device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v2] iio: gts-helper: Fix division loop
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/5] iio: adc: ad7192: Add AD7194 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v2] iio: gts-helper: Fix division loop
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• multiple iio_devices, one shared GPIO iio_trigger
  • From: Jeremy Mattfeld <jmmattfeld@xxxxxxxxx>
• Re: [PATCH v2] counter: fix privdata alignment
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v4 0/3] iio: humidity: hdc3020: add threshold events support
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• Re: [PATCH v4 3/3] iio: humidity: hdc3020: add threshold events support
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: ad7380: new driver for AD7380 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: add ad7944 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: ad7944: add driver for AD7944/AD7985/AD7986
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 0/2] iio: adc: ad7944: new driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [RESEND PATCH 1/2] dt-bindings: iio: ti,tmp117: add vcc supply binding
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: iio: magnetometer: Add Voltafield AF8133J
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH v3 1/4] dt-bindings: vendor-prefix: Add prefix for Voltafield
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH v3 0/4] Add support for AF8133J magnetometer
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH v3 4/4] MAINTAINERS: Add an entry for AF8133J driver
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH v3 3/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: Ondřej Jirman <megi@xxxxxx>
• Re: [PATCH v6 0/2] Add bmi323 support for ASUS ROG ALLY
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 2/2] iio: imu: bmi323: Add ACPI Match Table
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• [PATCH v6 1/2] iio: accel: bmc150: Document duplicate ACPI entries with bmi323 driver
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• [PATCH v6 0/2] Add bmi323 support for ASUS ROG ALLY
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH v3 04/15] device property: Introduce device_for_each_child_node_scoped()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH v3 15/15] iio: dac: ltc2688: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 14/15] iio: dac: ad5770r: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 13/15] iio: dac: ad3552r: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 12/15] iio: addac: ad74413r: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 11/15] iio: adc: ti-ads131e08: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 10/15] iio: adc: ti-ads1015: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 09/15] iio: adc: stm32: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 08/15] iio: adc: rzg2l_adc: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 07/15] iio: adc: qcom-spmi-adc5: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 05/15] iio: adc: max11410: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 06/15] iio: adc: mcp3564: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 04/15] device property: Introduce device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 03/15] iio: temp: ltc2983: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 02/15] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 01/15] device property: Move fwnode_handle_put() into property.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 00/15] device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 03/14] device property: Introduce device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: ti-ads1298: Add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: ti-ads1298: Add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/5] iio: adc: ad7192: Add AD7194 support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Add SPI support for BMP38x and BMP390
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v4] iio: accel: kxcjk-1013: Implement ACPI method ROTM to retrieve mount matrix.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v5 2/2] iio: adc: ti-ads1298: Add driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH 1/2] dt-bindings: iio: ti,tmp117: add vcc supply binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] iio: accel: bmc150: Duplicate ACPI entries
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Add SPI support for BMP38x and BMP390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v5 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: adc: ti-ads1298: Add bindings
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH 0/8] of: automate of_node_put() - new approach to loops.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4] iio: accel: kxcjk-1013: Implement ACPI method ROTM to retrieve mount matrix.
  • From: Sean Rhodes <sean@starlabs.systems>
• Re: [PATCH v4 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v3 0/6] iio: pressure: hsc030pa: cleanup and triggered buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk-1013: Implement ACPI method ROTM to retrieve mount matrix.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 0/3] iio: st_sensors: lsm9ds0: Miscellaneous cleanups
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/8] of: automate of_node_put() - new approach to loops.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v11 3/7] of: property: add device link support for io-backends
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] iio: accel: bmc150: Duplicate ACPI entries
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH v3 5/5] iio: adc: ad7192: Add AD7194 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH RFC 3/8] iio: buffer-dma: Enable buffer write support
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH RFC 6/8] iio: backend: add new backend ops
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH RFC 7/8] iio: dac: add support for the AD97339A RF DAC
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH RFC 8/8] iio: dac: adi-axi-dac: add support for AXI DAC IP core
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH RFC 1/8] iio: buffer: add function to set the buffer direction
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH RFC 4/8] iio: buffer-dmaengine: Support specifying buffer direction
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH RFC 0/8] iio: dac: support IIO backends on the output direction
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH RFC 5/8] iio: buffer-dmaengine: Enable write support
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH RFC 2/8] iio: buffer-dma: Rename iio_dma_buffer_data_available()
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: add ad7944 ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [RESEND PATCH v2] iio: gts-helper: Fix division loop
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: ti-ads1298: Add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Add SPI support for BMP38x and BMP390
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Add SPI support for BMP38x and BMP390
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v4 0/3] iio: humidity: hdc3020: add threshold events support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/2] Add bmi323 support for ASUS ROG ALLY
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 2/3] docs: iio: add documentation for device buffers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH 2/2] iio: temperature: tmp117: add support for vcc-supply
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] iio: accel: bmc150: Duplicate ACPI entries
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/2] Add bmi323 support for ASUS ROG ALLY
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH 2/2] iio: temperature: tmp117: add support for vcc-supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH 1/2] dt-bindings: iio: ti,tmp117: add vcc supply binding
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH 1/2] dt-bindings: iio: ti,tmp117: add vcc supply binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Add SPI support for BMP38x and BMP390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Add SPI support for BMP38x and BMP390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [RESEND PATCH 1/2] dt-bindings: iio: ti,tmp117: add vcc supply binding
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [RESEND PATCH 2/2] iio: temperature: tmp117: add support for vcc-supply
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: ti,tmp117: add vcc supply binding
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: ti,tmp117: add vcc supply binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: add ad7944 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 2/2] iio: temperature: tmp117: add support for vcc-supply
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: ti,tmp117: add vcc supply binding
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v5 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• [PATCH v5 1/2] iio: accel: bmc150: Duplicate ACPI entries
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• [PATCH v5 0/2] Add bmi323 support for ASUS ROG ALLY
  • From: J Lo <jlobue10@xxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Add SPI support for BMP38x and BMP390
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v3 5/5] iio: adc: ad7192: Add AD7194 support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH] drivers: iio: pressure: Add SPI support for BMP38x and BMP390
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] drivers: iio: pressure: Add SPI support for BMP38x and BMP390
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: iio: humidity: hdc3020: add interrupt bindings in example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 4/7] dt-bindings: mtd: spi-nor: add optional interrupts property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 3/7] dt-bindings: iio: humidity: hdc20x0: add optional interrupts property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 2/7] dt-bindings: rtc: abx80x: convert to yaml
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: add ad7944 ADCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 5/5] iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH v4 1/2] iio: accel: bmc150: Duplicate ACPI entries
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: accel: bmc150: Duplicate ACPI entries
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 3/3] iio: humidity: hdc3020: add threshold events support
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v4 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• [PATCH v4 1/2] iio: accel: bmc150: Duplicate ACPI entries
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• [PATCH v4 0/2] Add bmi323 support for ASUS ROG ALLY
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• [PATCH v3 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• [PATCH v3 1/2] iio: accel: bmc150: Duplicate ACPI entries
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• [PATCH v3 0/2] Add bmi323 support for ASUS ROG ALLY
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH v2 3/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: Andrey Skvortsov <andrej.skvortzov@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: magnetometer: Add DT binding for Voltafield AF8133J
  • From: Ondřej Jirman <megi@xxxxxx>
• Re: [PATCH v2 3/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: Ondřej Jirman <megi@xxxxxx>
• Re: [PATCH v2 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: magnetometer: Add DT binding for Voltafield AF8133J
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 01/14] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: magnetometer: Add DT binding for Voltafield AF8133J
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: accel: bmc150: Duplicate ACPI entries
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad7944: add driver for AD7944/AD7985/AD7986
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: accel: bmc150: Duplicate ACPI entries
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PULL] IIO: 1st set of fixes for the 6.8 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: accel: bmc150: Duplicate ACPI entries
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH v2 01/14] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1298: Add driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH v11 0/7] iio: add new backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v11 7/7] iio: adc: adi-axi-adc: move to backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: accel: bmc150: Duplicate ACPI entries
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v4 3/3] iio: humidity: hdc3020: add threshold events support
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• [PATCH v4 2/3] dt-bindings: iio: humidity: hdc3020: add interrupt bindings in example
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• [PATCH v4 1/3] iio: humidity: hdc3020: switch to 16bit register defines
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• [PATCH v4 0/3] iio: humidity: hdc3020: add threshold events support
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v4 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: adc: ti-ads1298: Add bindings
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v4 2/3] docs: iio: add documentation for device buffers
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] docs: iio: add documentation for device buffers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• [PATCH v2 1/2] iio: accel: bmc150: Duplicate ACPI entries
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH v2 3/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: Andrey Skvortsov <andrej.skvortzov@xxxxxxxxx>
• Re: [PATCH 1/5] spi: add spi_optimize_message() APIs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/5] spi: add spi_optimize_message() APIs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: magnetometer: Add Voltafield AF8133J
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/5] spi: add spi_optimize_message() APIs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 5/5] iio: adc: ad7380: use spi_optimize_message()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/5] spi: add spi_optimize_message() APIs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/5] spi: add spi_optimize_message() APIs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/5] spi: move splitting transfers to spi_optimize_message()
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 5/5] iio: adc: ad7380: use spi_optimize_message()
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v1] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 5/5] iio: adc: ad7380: use spi_optimize_message()
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/5] spi: add spi_optimize_message() APIs
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v1] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH v2 03/14] device property: Introduce device_for_each_child_node_scoped()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] iio: adc: ad7380: use spi_optimize_message()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/5] spi: add spi_optimize_message() APIs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 5/5] iio: adc: ad7380: use spi_optimize_message()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v1] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 03/14] device property: Introduce device_for_each_child_node_scoped()
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 01/14] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/5] spi: add spi_optimize_message() APIs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 5/5] iio: adc: ad7380: use spi_optimize_message()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: core: make use of DIV_ROUND_CLOSEST_ULL()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v4 3/3] docs: iio: add documentation for adis16475 driver
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v4 1/3] docs: iio: Refactor index.rst
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v4 2/3] docs: iio: add documentation for device buffers
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v4 0/3] adis16475 driver documentation
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• Re: [PATCH] iio: core: make use of DIV_ROUND_CLOSEST_ULL()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/2] iio: accel: bmc150: ASUS ROG ALLY Abort Loading
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• [PATCH v1] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH] iio: core: make use of DIV_ROUND_CLOSEST_ULL()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 5/5] iio: adc: ad7380: use spi_optimize_message()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 4/5] spi: axi-spi-engine: move message compile to optimize_message
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 2/5] spi: move splitting transfers to spi_optimize_message()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 3/5] spi: stm32: move splitting transfers to optimize_message
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 0/5] spi: add support for pre-cooking messages
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 1/5] spi: add spi_optimize_message() APIs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v6 2/7] dt-bindings: rtc: abx80x: convert to yaml
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: iio: magnetometer: Add Voltafield AF8133J
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH v2 1/4] dt-bindings: vendor-prefix: Add prefix for Voltafield
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH v2 4/4] MAINTAINERS: Add an entry for AF8133J driver
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH v2 3/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH v2 0/4] Add support for AF8133J magnetometer
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH v6 7/7] arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v6 6/7] arm64: dts: add description for solidrun am642 som and evaluation board
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v6 5/7] arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v6 4/7] dt-bindings: mtd: spi-nor: add optional interrupts property
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v6 3/7] dt-bindings: iio: humidity: hdc20x0: add optional interrupts property
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v6 2/7] dt-bindings: rtc: abx80x: convert to yaml
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v6 1/7] dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• [PATCH v6 0/7] arm64: dts: add description for solidrun am642 som and hummingboard evb
  • From: Josua Mayer <josua@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: (subset) [PATCH v2 00/33] spi: get rid of some legacy macros
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] iio: humidity: hdc3020: add threshold events support
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• Re: [PATCH 4/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH] iio: accel: kxcjk-1013: Implement ACPI method ROTM to retrieve mount matrix.
  • From: Sean Rhodes <sean@starlabs.systems>
• Re: [PATCH 2/4] dt-bindings: iio: magnetometer: Add DT binding for Voltafield AF8133J
  • From: Ondřej Jirman <megi@xxxxxx>
• Re: [PATCH 4/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 01/14] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/14] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/14] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/14] device property: Introduce device_for_each_child_node_scoped()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/14] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: magnetometer: Add DT binding for Voltafield AF8133J
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 01/14] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 0/8] of: automate of_node_put() - new approach to loops.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: magnetometer: Add DT binding for Voltafield AF8133J
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 01/14] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/8] of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RESEND PATCH v2] iio: gts-helper: Fix division loop
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] iio: accel: bmc150: ASUS ROG ALLY Abort Loading
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: core: make use of DIV_ROUND_CLOSEST_ULL()
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• Re: [PATCH v2 01/14] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/8] of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
  • From: Julia Lawall <julia.lawall@xxxxxxxx>
• Re: [PATCH 3/4] MAINTAINERS: Add an entry for AF8133J driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: vendor-prefix: Add prefix for Voltafield
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 06/14] iio: adc: qcom-spmi-adc5: Use device_for_each_child_node_scopd()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH 1/2] iio: accel: bmc150: ASUS ROG ALLY Abort Loading
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: magnetometer: Add DT binding for Voltafield AF8133J
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 3/4] MAINTAINERS: Add an entry for AF8133J driver
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH 1/4] dt-bindings: vendor-prefix: Add prefix for Voltafield
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH 4/4] iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH 2/4] dt-bindings: iio: magnetometer: Add DT binding for Voltafield AF8133J
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH 0/4] Add support for AF8133J magnetometer
  • From: Ondřej Jirman <megi@xxxxxx>
• Re: [PATCH] iio: core: fix memleak in iio_device_register_sysfs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 1/3] iio: st_sensors: lsm9ds0: Use dev_err_probe() everywhere
  • From: andy.shevchenko@xxxxxxxxx
• [PATCH v1 2/3] iio: st_sensors: lsm9ds0: Don't use "proxy" headers
  • From: andy.shevchenko@xxxxxxxxx
• [PATCH v1 0/3] iio: st_sensors: lsm9ds0: Miscellaneous cleanups
  • From: andy.shevchenko@xxxxxxxxx
• [PATCH v1 3/3] iio: st_sensors: lsm9ds0: Use common style for terminator in ID tables
  • From: andy.shevchenko@xxxxxxxxx
• Re: [PATCH] iio: core: fix memleak in iio_device_register_sysfs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 14/14] iio: dac: ltc2688: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 13/14] iio: dac: ad5770r: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 12/14] iio: dac: ad3552r: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 11/14] iio: addac: ad74413r: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 10/14] iio: adc: ti-ads131e08: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 09/14] iio: adc: ti-ads1015: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 08/14] iio: adc: stm32: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 06/14] iio: adc: qcom-spmi-adc5: Use device_for_each_child_node_scopd()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 07/14] iio: adc: rzg2l_adc: Use device_for_each_child_node_scopd()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 05/14] iio: adc: mcp3564: Use device_for_each_child_node_scopd()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 04/14] iio: adc: max11410: Use device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 03/14] device property: Introduce device_for_each_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 02/14] iio: temp: ltc2983: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 01/14] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 00/14] device property / IIO: Use cleanup.h magic for fwnode_handle_put() handling.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: fix memleak in iio_device_register_sysfs
  • From: andy.shevchenko@xxxxxxxxx
• Re: [PATCH 09/13] iio: addac: ad74413r: Use __free(fwnode_handle) to replace fwnode_handle_put() calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: add ad7944 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 8/8] iio: adc: adi-axi-adc: Use __free(device_node) and guard(mutex)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 7/8] iio: adc: ad7292: Use for_each_available_child_of_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 6/8] iio: adc: ad7124: Use for_each_available_child_of_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 5/8] iio: adc: rcar-gyroadc: use for_each_available_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 4/8] iio: adc: fsl-imx25-gcq: Use for_each_available_child_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/8] of: unittest: Use for_each_child_of_node_scoped()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/8] of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/8] of: Add cleanup.h based auto release via __free(device_node) markings.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/8] of: automate of_node_put() - new approach to loops.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] iio: accel: bmc150: ASUS ROG ALLY Abort Loading
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad7944: add driver for AD7944/AD7985/AD7986
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v11 0/7] iio: add new backend framework
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v11 7/7] iio: adc: adi-axi-adc: move to backend framework
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PULL] IIO: 1st set of fixes for the 6.8 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mcp320x: Simplify device removal logic
  • From: Arturas Moskvinas <arturas.moskvinas@xxxxxxxxx>
• [PATCH v3 6/6] iio: pressure: hsc030pa add triggered buffer
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 5/6] iio: pressure: hsc030pa add mandatory delay
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 4/6] iio: pressure: hsc030pa: update datasheet URLs
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 0/6] iio: pressure: hsc030pa: cleanup and triggered buffer
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 3/6] iio: pressure: hsc030pa: include cleanup
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH v3 2/6] iio: pressure: hsc030pa: use signed type to hold div_64() result
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH 2/2] iio: imu: bmi323: Add and enable ACPI Match Table
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• [PATCH 1/2] iio: accel: bmc150: ASUS ROG ALLY Abort Loading
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH v10 6/7] iio: adc: ad9467: convert to backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v10 7/7] iio: adc: adi-axi-adc: move to backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v11 4/7] iio: buffer-dmaengine: export buffer alloc and free functions
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v11 6/7] iio: adc: ad9467: convert to backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v11 7/7] iio: adc: adi-axi-adc: move to backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v11 5/7] iio: add the IIO backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v11 2/7] dt-bindings: adc: axi-adc: update bindings for backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v11 3/7] of: property: add device link support for io-backends
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v11 1/7] dt-bindings: adc: ad9467: add new io-backend property
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v11 0/7] iio: add new backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• Re: [PATCH] iio: imu: bmi323: Support loading of bmi323 driver for ASUS ROG ALLY
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH v3 3/3] docs: iio: add documentation for adis16475 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] docs: iio: add documentation for device buffers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: humidity: hdc3020: drop u8 register pairs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad7944: add driver for AD7944/AD7985/AD7986
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad7944: add driver for AD7944/AD7985/AD7986
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: add ad7944 ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/5] dt-bindings: iio: light: adps9300: Update interrupt definitions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: iio: light: adps9300: Add property vdd-supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: adxl367: fix I2C FIFO data register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: ad4130: zero-initialize clock init data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: bmi323: Support loading of bmi323 driver for ASUS ROG ALLY
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: iio: afe: voltage-divider: Add io-channel-cells
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 5/7] iio: add the IIO backend framework
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v10 5/7] iio: add the IIO backend framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 6/7] iio: adc: ad9467: convert to backend framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1298: Add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: bmi323: Support loading of bmi323 driver for ASUS ROG ALLY
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• Re: [PATCH v5 0/4] Add support of color temperature and chromaticity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: humidity: hdc3020: add threshold events support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ti-ads1298: Add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/1] Add 10EC5280 to bmi160_i2c ACPI IDs to allow binding on some devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mcp320x: Simplify device removal logic
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/5] iio: adc: ad7192: Use standard attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: make iio_bus_type const
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers/iio/accel/kxcjk-1013: Retrieve mount-matrix from ACPI Implement kxj_acpi_orientation to retrieve mount matrix from ACPI ROTM method
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers/iio/accel/kxcjk-1013: Retrieve mount-matrix from ACPI Implement kxj_acpi_orientation to retrieve mount matrix from ACPI ROTM method
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: bmi323: Support loading of bmi323 driver for ASUS ROG ALLY
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: pressure: hsc030pa add triggered buffer
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 3/3] dt-bindings: iio: imu: st_lsm6dsx: add asm330lhhxg1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: pressure: hsc030pa add triggered buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v10 1/7] dt-bindings: adc: ad9467: add new io-backend property
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v10 3/7] of: property: add device link support for io-backends
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v10 7/7] iio: adc: adi-axi-adc: move to backend framework
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v10 0/7] iio: add new backend framework
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v10 7/7] iio: adc: adi-axi-adc: move to backend framework
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v10 6/7] iio: adc: ad9467: convert to backend framework
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v10 5/7] iio: add the IIO backend framework
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v10 5/7] iio: add the IIO backend framework
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: imu: bmi323: Support loading of bmi323 driver for ASUS ROG ALLY
  • From: Jonathan LoBue <jlobue10@xxxxxxxxx>
• [PATCH v10 0/7] iio: add new backend framework
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2] counter: fix privdata alignment
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v10 2/7] dt-bindings: adc: axi-adc: update bindings for backend framework
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v10 4/7] iio: buffer-dmaengine: export buffer alloc and free functions
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v10 6/7] iio: adc: ad9467: convert to backend framework
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v10 5/7] iio: add the IIO backend framework
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• Re: [PATCH] counter: fix privdata alignment
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH] counter: fix privdata alignment
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] counter: fix privdata alignment
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] counter: fix privdata alignment
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: core: make iio_bus_type const
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 4/5] dt-bindings: iio: light: Avago APDS9306
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: iio: light: adps9300: Add property vdd-supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 5/5] iio: adc: ad7192: Add AD7194 support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] drivers/iio/accel/kxcjk-1013: Retrieve mount-matrix from ACPI Implement kxj_acpi_orientation to retrieve mount matrix from ACPI ROTM method
  • From: Sean Rhodes <sean@starlabs.systems>
• Re: [PATCH v3 00/32] spi: get rid of some legacy macros
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] iio: core: make iio_bus_type const
  • From: "Ricardo B. Marliere" <ricardo@xxxxxxxxxxxx>
• Re: [PATCH v6 4/5] dt-bindings: iio: light: Avago APDS9306
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 1/5] iio: adc: ad7192: Use device api
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] counter: fix privdata alignment
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH] counter: make counter_bus_type const
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v3 1/5] iio: adc: ad7192: Use device api
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v3 5/5] iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v3 4/5] dt-bindings: iio: adc: ad7192: Add AD7194 support
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v3 3/5] iio: adc: ad7192: Use standard attribute
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v3 2/5] iio: adc: ad7192: Pass state directly
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v3 1/5] iio: adc: ad7192: Use device api
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v3 0/5] iio: adc: ad7192: Add support for AD7194
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH v4 1/1] Add 10EC5280 to bmi160_i2c ACPI IDs to allow binding on some devices
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/5] dt-bindings: iio: light: adps9300: Update interrupt definitions
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v6 4/5] dt-bindings: iio: light: Avago APDS9306
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: iio: light: adps9300: Add property vdd-supply
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] docs: iio: add documentation for adis16475 driver
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v3 2/3] docs: iio: add documentation for device buffers
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v3 1/3] docs: iio: Refactor index.rst
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH v3 0/3] adis16475 driver documentation
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH] iio: adc: mcp320x: Simplify device removal logic
  • From: Arturas Moskvinas <arturas.moskvinas@xxxxxxxxx>
• Re: [PATCH v6 4/5] dt-bindings: iio: light: Avago APDS9306
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 3/5] dt-bindings: iio: light: adps9300: Update interrupt definitions
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: iio: light: adps9300: Add property vdd-supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad7944: add driver for AD7944/AD7985/AD7986
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad4130: only set GPIO_CTRL if pin is unused
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: ad4130: zero-initialize clock init data
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 03/32] iio: adc: ad_sigma_delta: Follow renaming of SPI "master" to "controller"
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: humidity: hdc3020: add interrupt bindings in example
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v4 1/1] Add 10EC5280 to bmi160_i2c ACPI IDs to allow binding on some devices
  • From: Jesus Gonzalez <jesusmgh@xxxxxxxxx>
• [PATCH v3 00/32] spi: get rid of some legacy macros
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 03/32] iio: adc: ad_sigma_delta: Follow renaming of SPI "master" to "controller"
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: add ad7944 ADCs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v6 5/5] iio: light: Add support for APDS9306 Light Sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad7944: add driver for AD7944/AD7985/AD7986
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 1/1] Add 10EC5280 to bmi160_i2c ACPI IDs to allow binding on some devices
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 2/2] iio: adc: ad4130: only set GPIO_CTRL if pin is unused
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH 1/2] iio: adc: ad4130: zero-initialize clock init data
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH v9 6/7] iio: adc: ad9467: convert to backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 5/5] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v6 0/5] Support for Avago APDS9306 Ambient Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad7944: add driver for AD7944/AD7985/AD7986
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v9 6/7] iio: adc: ad9467: convert to backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v9 5/7] iio: add the IIO backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/2] iio: accel: adxl367: fix DEVID read after reset
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: adxl367: fix I2C FIFO data register
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: humidity: hdc3020: add interrupt bindings in example
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: humidity: hdc3020: add interrupt bindings in example
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v3 3/3] iio: humidity: hdc3020: add threshold events support
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: iio: humidity: hdc3020: add interrupt bindings in example
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• [PATCH v3 1/3] iio: humidity: hdc3020: drop u8 register pairs
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• [PATCH v3 0/3] iio: humidity: hdc3020: add threshold events support
  • From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
• [PATCH 2/2] iio: accel: adxl367: fix I2C FIFO data register
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH 1/2] iio: accel: adxl367: fix DEVID read after reset
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH v9 6/7] iio: adc: ad9467: convert to backend framework
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v9 6/7] iio: adc: ad9467: convert to backend framework
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: add ad7944 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 2/2] iio: adc: ad7944: add driver for AD7944/AD7985/AD7986
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: add ad7944 ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 0/2] iio: adc: ad7944: new driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 1/1] Add 10EC5280 to bmi160_i2c ACPI IDs to allow binding on some devices
  • From: Jesus Gonzalez <jesusmgh@xxxxxxxxx>
• Re: [PATCH v9 6/7] iio: adc: ad9467: convert to backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v9 6/7] iio: adc: ad9467: convert to backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1298: Add driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: ti-ads1298: Add bindings
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: iio: afe: voltage-divider: Add io-channel-cells
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1298: Add driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1298: Add driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v6 0/5] Support for Avago APDS9306 Ambient Light Sensor
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v9 5/7] iio: add the IIO backend framework
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v9 6/7] iio: adc: ad9467: convert to backend framework
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v9 6/7] iio: adc: ad9467: convert to backend framework
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1298: Add driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/5] iio: light: Add support for APDS9306 Light Sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v6 5/5] iio: light: Add support for APDS9306 Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v6 4/5] dt-bindings: iio: light: Avago APDS9306
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v6 3/5] dt-bindings: iio: light: adps9300: Update interrupt definitions
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v6 2/5] dt-bindings: iio: light: adps9300: Add property vdd-supply
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v6 1/5] dt-bindings: iio: light: Merge APDS9300 and APDS9960 schemas
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• [PATCH v6 0/5] Support for Avago APDS9306 Ambient Light Sensor
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1298: Add driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] Add 10EC5280 to bmi160_i2c ACPI IDs to allow binding on some devices
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4] dt-bindings: iio: afe: voltage-divider: Add io-channel-cells
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [PATCH v9 7/7] iio: adc: adi-axi-adc: move to backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v9 6/7] iio: adc: ad9467: convert to backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v9 5/7] iio: add the IIO backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v9 4/7] iio: buffer-dmaengine: export buffer alloc and free functions
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v9 3/7] of: property: add device link support for io-backends
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v9 1/7] dt-bindings: adc: ad9467: add new io-backend property
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v9 2/7] dt-bindings: adc: axi-adc: update bindings for backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• [PATCH v9 0/7] iio: add new backend framework
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• Re: [PATCH v8 5/7] iio: add the IIO backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v3 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: adc: ti-ads1298: Add bindings
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: (subset) [PATCH 00/42] Fix coccicheck warnings
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] counter: make counter_bus_type const
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 4/4] iio: hid-sensor-als: Add light chromaticity support
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v5 3/4] iio: hid-sensor-als: Add light color temperature support
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v5 2/4] iio: hid-sensor-als: Remove hardcoding of values for enums
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v5 1/4] iio: hid-sensor-als: Assign channels dynamically
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v5 0/4] Add support of color temperature and chromaticity
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v2 1/1] Add 10EC5280 to bmi160_i2c ACPI IDs to allow binding on some devices
  • From: Jesus Gonzalez <jesusmgh@xxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: afe: voltage-divider: Add io-channel-cells
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: pressure: hsc030pa add triggered buffer
  • From: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
• [PATCH] counter: fix privdata alignment
  • From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ti-ads1298: Add driver
  • From: Mark Brown <broonie@xxxxxxxxxx>