On 21/06/2024 09:40, Yasin Lee wrote: > A capacitive proximity sensor > > Signed-off-by: Yasin Lee <yasin.lee.x@xxxxxxxxx> > --- > .../bindings/iio/proximity/tyhx,hx9023s.yaml | 115 +++++++++++++++++++++ > 1 file changed, 115 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml b/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml > new file mode 100644 > index 000000000000..beca70ce7609 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml > @@ -0,0 +1,115 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: TYHX HX9023S capacitive proximity sensor > + > +maintainers: > + - Yasin Lee <yasin.lee.x@xxxxxxxxx> > + > +description: | > + TYHX HX9023S proximity sensor. Datasheet can be found here: > + http://www.tianyihexin.com/ueditor/php/upload/file/20240614/1718336303992081.pdf > + > +allOf: > + - $ref: /schemas/iio/iio.yaml# Which part of iio.yaml binding do you use here? I cannot find anything, so this looks wrong. > + > +properties: > + compatible: > + const: tyhx,hx9023s > + > + reg: > + maxItems: 1 > + > + interrupts: > + description: > + Generated by device to announce preceding read request has finished > + and data is available or that a close/far proximity event has happened. > + maxItems: 1 > + > + vdd-supply: true > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > +patternProperties: > + "^channel@[0-4]$": > + $ref: /schemas/iio/adc/adc.yaml > + type: object > + > + properties: > + reg: > + minimum: 0 > + maximum: 4 > + description: The channel number. > + > + input-channel: Isn't this duplicating single-channel property? Where is this property defined (which common schema)? > + $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 0 > + maximum: 4 > + description: > + Specify the input pin used in single-ended configuration. > + > + diff-channels: true > + > + oneOf: > + - required: > + - input-channel > + - required: > + - diff-channels > + > + required: > + - reg > + > + additionalProperties: false > + > +required: > + - compatible > + - vdd-supply > + - reg Keep the same order as in properties. > + > +unevaluatedProperties: false > + Best regards, Krzysztof