Re: [RESEND][PATCH] iio: simplify with regmap_set_bits(), regmap_clear_bits()

[Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>]

On 2024/6/12 00:52, Trevor Gamblin wrote:
> Simplify the way regmap is accessed in iio drivers.
>
> Instead of using regmap_update_bits() and passing the mask twice, use
> regmap_set_bits().
>
> Instead of using regmap_update_bits() and passing val = 0, use
> regmap_clear_bits().
>
> Suggested-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
> Signed-off-by: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
> ---

[...]

> diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c
> index b4a2e057d80f..2535c2c3e60b 100644
> --- a/drivers/iio/adc/sc27xx_adc.c
> +++ b/drivers/iio/adc/sc27xx_adc.c
> @@ -508,13 +508,13 @@ static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
>   		}
>   	}
>   
> -	ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> -				 SC27XX_ADC_EN, SC27XX_ADC_EN);
> +	ret = regmap_set_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> +			      SC27XX_ADC_EN);
>   	if (ret)
>   		goto regulator_restore;
>   
> -	ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_CLR,
> -				 SC27XX_ADC_IRQ_CLR, SC27XX_ADC_IRQ_CLR);
> +	ret = regmap_set_bits(data->regmap, data->base + SC27XX_ADC_INT_CLR,
> +			      SC27XX_ADC_IRQ_CLR);
>   	if (ret)
>   		goto disable_adc;
>   
> @@ -537,8 +537,8 @@ static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
>   	if (ret)
>   		goto disable_adc;
>   
> -	ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> -				 SC27XX_ADC_CHN_RUN, SC27XX_ADC_CHN_RUN);
> +	ret = regmap_set_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> +			      SC27XX_ADC_CHN_RUN);
>   	if (ret)
>   		goto disable_adc;
>   
> @@ -559,8 +559,8 @@ static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
>   	value &= SC27XX_ADC_DATA_MASK;
>   
>   disable_adc:
> -	regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> -			   SC27XX_ADC_EN, 0);
> +	regmap_clear_bits(data->regmap, data->base + SC27XX_ADC_CTL,
> +			  SC27XX_ADC_EN);
>   regulator_restore:
>   	if ((data->var_data->set_volref) && (channel == 30 || channel == 31)) {
>   		ret_volref = regulator_set_voltage(data->volref,
> @@ -765,15 +765,14 @@ static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
>   {
>   	int ret;
>   
> -	ret = regmap_update_bits(data->regmap, data->var_data->module_en,
> -				 SC27XX_MODULE_ADC_EN, SC27XX_MODULE_ADC_EN);
> +	ret = regmap_set_bits(data->regmap, data->var_data->module_en,
> +			      SC27XX_MODULE_ADC_EN);
>   	if (ret)
>   		return ret;
>   
>   	/* Enable ADC work clock and controller clock */
> -	ret = regmap_update_bits(data->regmap, data->var_data->clk_en,
> -				 SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN,
> -				 SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
> +	ret = regmap_set_bits(data->regmap, data->var_data->clk_en,
> +			      SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
>   	if (ret)
>   		goto disable_adc;
>   
> @@ -789,11 +788,11 @@ static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
>   	return 0;
>   
>   disable_clk:
> -	regmap_update_bits(data->regmap, data->var_data->clk_en,
> -			   SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
> +	regmap_clear_bits(data->regmap, data->var_data->clk_en,
> +			  SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
>   disable_adc:
> -	regmap_update_bits(data->regmap, data->var_data->module_en,
> -			   SC27XX_MODULE_ADC_EN, 0);
> +	regmap_clear_bits(data->regmap, data->var_data->module_en,
> +			  SC27XX_MODULE_ADC_EN);
>   
>   	return ret;
>   }
> @@ -803,11 +802,11 @@ static void sc27xx_adc_disable(void *_data)
>   	struct sc27xx_adc_data *data = _data;
>   
>   	/* Disable ADC work clock and controller clock */
> -	regmap_update_bits(data->regmap, data->var_data->clk_en,
> -			   SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
> +	regmap_clear_bits(data->regmap, data->var_data->clk_en,
> +			  SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
>   
> -	regmap_update_bits(data->regmap, data->var_data->module_en,
> -			   SC27XX_MODULE_ADC_EN, 0);
> +	regmap_clear_bits(data->regmap, data->var_data->module_en,
> +			  SC27XX_MODULE_ADC_EN);
>   }
>   
>   static const struct sc27xx_adc_variant_data sc2731_data = {

For SPRD sc27xx parts, looks good to me. Thanks.
Reviewed-by: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>