There are actually 4 configuration modes of clock source for AD719X
devices. Either a crystal can be attached externally between MCLK1 and
MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2
pin. The other 2 modes make use of the 4.92MHz internal clock.
The presence of an external clock is optional, not required. When
absent, internal clock of the device is used.
Fixes: f7356e47032c ("dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192")
Signed-off-by: Alisa-Dariana Roman <alisa.roman@xxxxxxxxxx>
---
.../devicetree/bindings/iio/adc/adi,ad7192.yaml | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index a03da9489ed9..3ae2f860d24c 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -39,11 +39,15 @@ properties:
clocks:
maxItems: 1
- description: phandle to the master clock (mclk)
+ description: |
+ Optionally, either a crystal can be attached externally between MCLK1 and
+ MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2
+ pin. If absent, internal 4.92MHz clock is used.
clock-names:
- items:
- - const: mclk
+ enum:
+ - xtal
+ - mclk
interrupts:
maxItems: 1
@@ -135,8 +139,6 @@ patternProperties:
required:
- compatible
- reg
- - clocks
- - clock-names
- interrupts
- dvdd-supply
- avdd-supply
@@ -202,8 +204,6 @@ examples:
spi-max-frequency = <1000000>;
spi-cpol;
spi-cpha;
- clocks = <&ad7192_mclk>;
- clock-names = "mclk";
interrupts = <25 0x2>;
interrupt-parent = <&gpio>;
aincom-supply = <&aincom>;
--
2.34.1
