These two defines have the same purpose and this change doesn't
introduce any differences in drivers/counter/stm32-timer-cnt.o.
The only difference between the two is that
TIM_DIER_CC_IE(1) == TIM_DIER_CC2IE
while
TIM_DIER_CCxIE(1) == TIM_DIER_CC1IE
. That makes it necessary to have an explicit "+ 1" in the user code,
but IMHO this is a good thing as this is the code locatation that
"knows" that for software channel 1 you have to use TIM_DIER_CC2IE
(because software guys start counting at 0, while the relevant hardware
designer started at 1).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
---
drivers/counter/stm32-timer-cnt.c | 4 ++--
include/linux/mfd/stm32-timers.h | 1 -
2 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c
index 0664ef969f79..186e73d6ccb4 100644
--- a/drivers/counter/stm32-timer-cnt.c
+++ b/drivers/counter/stm32-timer-cnt.c
@@ -465,7 +465,7 @@ static int stm32_count_events_configure(struct counter_device *counter)
ret = stm32_count_capture_configure(counter, event_node->channel, true);
if (ret)
return ret;
- dier |= TIM_DIER_CC_IE(event_node->channel);
+ dier |= TIM_DIER_CCxIE(event_node->channel + 1);
break;
default:
/* should never reach this path */
@@ -478,7 +478,7 @@ static int stm32_count_events_configure(struct counter_device *counter)
/* check for disabled capture events */
for (i = 0 ; i < priv->nchannels; i++) {
- if (!(dier & TIM_DIER_CC_IE(i))) {
+ if (!(dier & TIM_DIER_CCxIE(i + 1))) {
ret = stm32_count_capture_configure(counter, i, false);
if (ret)
return ret;
diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h
index 92b45a559656..f09ba598c97a 100644
--- a/include/linux/mfd/stm32-timers.h
+++ b/include/linux/mfd/stm32-timers.h
@@ -47,7 +47,6 @@
#define TIM_DIER_CC2IE TIM_DIER_CCxIE(2) /* CC2 Interrupt Enable */
#define TIM_DIER_CC3IE TIM_DIER_CCxIE(3) /* CC3 Interrupt Enable */
#define TIM_DIER_CC4IE TIM_DIER_CCxIE(4) /* CC4 Interrupt Enable */
-#define TIM_DIER_CC_IE(x) BIT((x) + 1) /* CC1, CC2, CC3, CC4 interrupt enable */
#define TIM_DIER_UDE BIT(8) /* Update DMA request Enable */
#define TIM_DIER_CCxDE(x) BIT(9 + ((x) - 1)) /* CCx DMA request Enable (x ∈ {1, .. 4}) */
#define TIM_DIER_CC1DE TIM_DIER_CCxDE(1) /* CC1 DMA request Enable */
--
2.43.0
