Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx> Signed-off-by: Trevor Gamblin <tgamblin@xxxxxxxxxxxx> --- drivers/iio/adc/ina2xx-adc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c index 9e52207352fb..727e390bd979 100644 --- a/drivers/iio/adc/ina2xx-adc.c +++ b/drivers/iio/adc/ina2xx-adc.c @@ -1046,8 +1046,7 @@ static void ina2xx_remove(struct i2c_client *client) iio_device_unregister(indio_dev); /* Powerdown */ - ret = regmap_update_bits(chip->regmap, INA2XX_CONFIG, - INA2XX_MODE_MASK, 0); + ret = regmap_clear_bits(chip->regmap, INA2XX_CONFIG, INA2XX_MODE_MASK); if (ret) dev_warn(&client->dev, "Failed to power down device (%pe)\n", ERR_PTR(ret)); -- 2.45.2
