Hi Nishant, An IIO driver for ADXRS290 is a very good proposal. Go ahead and submit your application. Thanks, Dragos -----Original Message----- From: Nishant Malpani <nish.malpani25@xxxxxxxxx> Sent: Thursday, March 26, 2020 7:34 PM To: linux-iio@xxxxxxxxxxxxxxx Cc: Bogdan, Dragos <Dragos.Bogdan@xxxxxxxxxx> Subject: [RFC] IIO Driver for GSoC 2020 [External] Hello IIO, The project proposal for GSoC 2020 under The Linux Foundation [1] must include a Analog Devices, Inc.'s component for which a novel driver is to be implemented. My search for a prospective device has culminated to consider ADXRS290 Gyroscope. About ADXRS290: - Ultra-low Noise, Dual-Axis (Pitch and Roll) MEMS Gyroscope - "Recommended for New Designs" phase - SPI digital output - Datasheet in [2] - Product overview in [3] The existence of any compatible drivers for the above component was looked for in Analog Device, Inc.'s page that lists all drivers [4] and their kernel tree [5] and the Linux Kernel Driver database (LKDDb). It was found to be void and ergo my decision to choose the aforementioned component. Is there any other factor I should consider before choosing a component to make a driver for? Do I go ahead with ADXRS290 gyroscope in my proposal? If yes, are there any recommendations/suggestions you'd like to provide for a beginner indulging in making a kernel driver for such a component? Thank you for your time. With regards, Nishant Malpani [1] https://wiki.linuxfoundation.org/gsoc/2020-gsoc-iio-driver [2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADXRS290.pdf [3] https://www.analog.com/en/products/adxrs290.html#product-overview [4] https://wiki.analog.com/resources/tools-software/linux-drivers-all [5] https://github.com/analogdevicesinc/linux
