Linux IIO Development

• Thread Index

• [PATCH 1/4] dt-bindings: iio: adc: sd modulator: add vref support
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• [PATCH 2/4] iio: adc: sd modulator: add scale support
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• [PATCH 3/4] iio: adc: stm32-dfsdm: use resolution define
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• [PATCH 0/4] iio: adc: stm32-dfsdm: add scale and offset support
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• Re: [PATCH v4 2/7] dt-bindings: iio: light: add support for Dyna-Image AL3010
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH v4 7/7] iio: light: al3320a allow module autoload and polish
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v4 6/7] iio: light: al3320a implement devm_add_action_or_reset
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v4 5/7] iio: light: al3320a implement suspend support
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v4 4/7] iio: light: add Dyna-Image AL3010 driver
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v4 3/7] iio: light: al3320a slightly improve code formatting
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v4 2/7] dt-bindings: iio: light: add support for Dyna-Image AL3010
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v4 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v4 0/7] AL3010 introduction
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH 4/3] iio: dac: ltc2632: remove some unused defines
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 10/17] iio: cros_ec: Use cros_ec_send_cmd_msg()
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• [PATCH v2 1/2] dt-binding: iio: add NPCM ADC reset support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2 2/2] iio: adc: modify NPCM reset support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH v2 3/4] SFH: Transport Driver to add support of AMD sensor fusion Hub (SFH)
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] SFH: PCI driver to add support of AMD sensor fusion Hub using HID framework
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] SFH: Add maintainer list and documentation for AMD SFH based on HID framework
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: frequency: adf4360: Add support for ADF4360 PLLs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: adis: Refactor adis_initial_startup
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: frequency: adf4360: Add support for ADF4360 PLLs
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: frequency: adf4360: Add support for ADF4360 PLLs
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v3 3/3] MAINTAINERS: add entry for ADF4360 PLL driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 5/5] MAINTAINERS: add entry for hmc425a driver.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 3/3] MAINTAINERS: add entry for hmc425a driver.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: adis: Refactor adis_initial_startup
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v3 2/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v3 0/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v3 1/2] iio: vcnl4000: Use a single return when getting IIO_CHAN_INFO_RAW
  • From: Guido Günther <agx@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] SFH: PCI driver to add support of AMD sensor fusion Hub using HID framework
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] SFH: PCI driver to add support of AMD sensor fusion Hub using HID framework
  • From: "Shah, Nehal-bakulchandra" <nbshah@xxxxxxx>
• Re: [PATCH v3 4/7] iio: light: add Dyna-Image AL3010 driver
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040
  • From: Guido Günther <agx@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: srf04: add power management feature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: devantech-srf04.yaml: add pm feature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Add SEMTECH SX9310/9311 sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zalkonnikov <ez@xxxxxxxxxxxxx>
• Re: [PATCH][next] iio: st_sensors: handle memory allocation failure to fix null pointer dereference
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7124: add 3db filter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] Documentation: ABI: testing: ad7192: update sysfs docs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: adc: ad7192: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][V2] iio: ad5755: fix spelling mistake "to" -> "too" and grammar
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: fix runtime autosuspend delay when slow polling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v6] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v5] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: frequency: Add docs for ADF4360 PLL
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: frequency: adf4360: Add support for ADF4360 PLLs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: fix sleep in atomic context
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: modify NPCM reset support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: Fix mismatched comments
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: adc: at91-sama5d2_adc: update for other trigger usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/5] iio: amplifiers: hmc425a: Add support for HMC425A attenuator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/5] iio: core: Handle 'dB' suffix in core
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/7] iio: light: al3320a implement suspend support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/7] iio: light: add Dyna-Image AL3010 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: dac: ltc2632: add support for LTC2636 family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: ltc2632: expand for ltc2636 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 10/17] iio: cros_ec: Use cros_ec_send_cmd_msg()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 7/7] iio: light: al3320a allow module autoload and polish
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v3 6/7] iio: light: al3320a implement suspend support
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v3 5/7] iio: light: al3010 implement suspend support
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v3 4/7] iio: light: add Dyna-Image AL3010 driver
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v3 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v3 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v3 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v3 0/7] iio: light: AL3010 introduction
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH 2/4] iio: imu: adis: Refactor adis_initial_startup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 9/9] iio: imu: inv_mpu6050: fix LPF bandwidth setting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/9] iio: imu: inv_mpu6050: cleanup spi support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Add SEMTECH SX9310/9311 sensor driver
  • From: Daniel Campello <campello@xxxxxxxxxxxx>
• Re[2]: IIO driver module doesn't load automatically on kernel 4.19
  • From: "Nick Burkitt" <nick.burkitt@xxxxxxxxxxx>
• Re: [PATCH 1/9] dt-bindings: iio: imu: inv_mpu6050: add missing entry for mpu6000
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: iio: light: add support for Dyna-Image AL3010
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: iio: light: add support for Dyna-Image AL3010
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: IIO driver module doesn't load automatically on kernel 4.19
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: Temperature support for FXLS8471Q accelerometer
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 10/17] iio: cros_ec: Use cros_ec_send_cmd_msg()
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• [PATCH 00/17] platform/chrome: Replace cros_ec_cmd_xfer_status
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v2 2/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v2 1/2] iio: vcnl4000: Use a single return when getting IIO_CHAN_INFO_RAW
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v2 0/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH 2/3] iio: dac: ltc2632: drop some duplicated data
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: ltc2632: expand for ltc2636 support
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 3/3] iio: dac: ltc2632: add support for LTC2636 family
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1] iio: accel: st_accel: Use st_sensors_dev_name_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• IIO driver module doesn't load automatically on kernel 4.19
  • From: "Nick Burkitt" <nick.burkitt@xxxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: modify NPCM reset support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Temperature support for FXLS8471Q accelerometer
  • From: Dylan Howey <Dylan.Howey@xxxxxxxxxxxxx>
• Re: [PATCH V3] iio: adc: ad7124: Add direct reg access
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v4 5/5] MAINTAINERS: add entry for hmc425a driver.
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v4 3/5] iio: amplifiers: hmc425a: Add support for HMC425A attenuator
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v4 4/5] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v4 1/5] iio: core: Handle 'dB' suffix in core
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v4 2/5] iio: amplifiers: ad8366: Add write_raw_get_fmt function
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v4 0/5] Add hmc425a support
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH V3] iio: adc: ad7124: Add direct reg access
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH v3 3/3] MAINTAINERS: add entry for hmc425a driver.
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v3 1/3] iio: amplifiers: hmc425a: Add support for HMC425A step attenuator with gpio interface
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [RESEND PATCH] iio: adc: ad7124: Add direct reg access
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [RESEND PATCH V2] iio: adc: ad7124: Add direct reg access
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: [RESEND PATCH] iio: adc: ad7124: Add direct reg access
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RESEND PATCH] iio: adc: ad7124: Add direct reg access
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH v2 4/4] SFH: Create HID report to Enable support of AMD sensor fusion Hub (SFH)
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH v2 3/4] SFH: Transport Driver to add support of AMD sensor fusion Hub (SFH)
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH v2 2/4] SFH: PCI driver to add support of AMD sensor fusion Hub using HID framework
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH v2 1/4] SFH: Add maintainer list and documentation for AMD SFH based on HID framework
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH v2 0/4] SFH: Add Support for AMD Sensor Fusion Hub
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• Re: [PATCH v2 5/7] iio: light: al3010 implement suspend support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: iio: light: add support for Dyna-Image AL3010
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: vcnl3020 hwmon/proximity driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: vcnl3020 hwmon/proximity driver
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• Re: [PATCH] iio: adc: ad7124: Add direct reg access
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: adc: ad7124: Add direct reg access
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH v2 7/7] iio: light: al3320a allow module autoload and polish
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v2 6/7] iio: light: al3320a implement suspend support
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v2 5/7] iio: light: al3010 implement suspend support
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v2 4/7] iio: light: add Dyna-Image AL3010 driver
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v2 3/7] iio: light: al3320a slightly improve code formatting
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v2 2/7] dt-bindings: iio: light: add support for Dyna-Image AL3010
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v2 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH 0/7] iio: light: AL3010 introduction
  • From: David Heidelberg <david@xxxxxxx>
• Re: vcnl3020 hwmon/proximity driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 3/3] iio: adc: at91-sama5d2_adc: update for other trigger usage
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v3 2/3] iio: adc: at91-sama5d2_adc: handle unfinished conversions
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v3 1/3] iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v3 0/3] Enhancements to at91-sama5d2_adc driver
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• vcnl3020 hwmon/proximity driver
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH v3 3/3] MAINTAINERS: add entry for ADF4360 PLL driver
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 1/3] iio: frequency: adf4360: Add support for ADF4360 PLLs
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: iio: frequency: Add docs for ADF4360 PLL
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v4 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: frequency: Add docs for ADF4360 PLL
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: frequency: Add docs for ADF4360 PLL
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/2] Device tree bindings for TI HDC20x0 humidity and temperature sensors
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: input: Add docs for ADC driven joystick.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/5] mfd: rn5t618: add ADC subdevice for RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: at91-sama5d2_adc: update for other trigger usage
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc: at91-sama5d2_adc: handle unfinished conversions
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: Fix mismatched comments
  • From: JieunKim <jieun.kim4758@xxxxxxxxx>
• Re: [PATCH 2/5] mfd: rn5t618: add ADC subdevice for RC5T619
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2 v5] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Bakker <xc-racer2@xxxxxxx>
• [PATCH v2 2/5] dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] IIO: Ingenic JZ47xx: Add xlate cb to retrieve correct channel idx
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v2 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v2 4/5] dt-bindings: input: Add docs for ADC driven joystick.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v2 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2 v5] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2 v6] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v6] iio: light: Add DT bindings for GP2AP002
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 7/7] iio: light: al3320a allow module autoload when defined in dts
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH 3/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH 2/7] iio: light: add Dyna-Image AL3010 driver
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH 6/7] iio: light: al3320a implement suspend support
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH 4/7] dt-bindings: iio: light: add support for Dyna-Image AL3010
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH 1/7] iio: light: al3320a slightly improve code formatting
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH 5/7] iio: light: al3010 implement suspend support
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH] iio: ad5755: fix spelling mistake "to" -> "too"
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 2/5] mfd: rn5t618: add ADC subdevice for RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH] iio: buffer: align the size of scan bytes to size of the largest element
  • From: Lars Möllendorf <lars.moellendorf@xxxxxxxxxx>
• [PATCH] iio: adc: stm32-adc: fix runtime autosuspend delay when slow polling
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 2/2 v5] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Bakker <xc-racer2@xxxxxxx>
• [PATCH v4 2/2] Device tree bindings for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zalkonnikov <ez@xxxxxxxxxxxxx>
• [PATCH v4 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zalkonnikov <ez@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: stm32: convert dfsdm to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH][next] iio: st_sensors: handle memory allocation failure to fix null pointer dereference
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: [PATCH] iio: ad5755: fix spelling mistake "to" -> "too"
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH][V2] iio: ad5755: fix spelling mistake "to" -> "too" and grammar
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH][V2] iio: ad5755: fix spelling mistake "to" -> "too" and grammar
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] dt-bindings: stm32: convert dfsdm to json-schema
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• Re: [PATCH] iio: ad5755: fix spelling mistake "to" -> "too"
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: ad5755: fix spelling mistake "to" -> "too"
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-binding: iio: add NPCM ADC reset support
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/2] Documentation: ABI: testing: ad7192: update sysfs docs
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 2/2] staging: iio: adc: ad7192: move out of staging
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 0/2] staging: iio: adc: ad7192: move out of staging
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v2 1/3] iio: frequency: adf4360: Add support for ADF4360 PLLs
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 3/3] MAINTAINERS: add entry for ADF4360 PLL driver
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: iio: frequency: Add docs for ADF4360 PLL
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 3/3] MAINTAINERS: add entry for hmc425a driver.
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v2 1/3] iio: amplifiers: hmc425a: Add support for HMC425A step attenuator with gpio interface
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH] iio: adc: ad7124: add 3db filter
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: frequency: Add docs for ADF4360 PLL
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v4 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v4 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: Add SEMTECH SX9310/9311 sensor driver
  • From: Daniel Campello <campello@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/2 v5] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v5] iio: light: Add DT bindings for GP2AP002
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: frequency: Add docs for ADF4360 PLL
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH][next] iio: st_sensors: handle memory allocation failure to fix null pointer dereference
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH 3/3] MAINTAINERS: add entry for ADF4360 PLL driver
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/3] iio: frequency: adf4360: Add support for ADF4360 PLLs
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings: iio: frequency: Add docs for ADF4360 PLL
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: adc: stm32-dfsdm: fix sleep in atomic context
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• Re: [PATCH v3 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zaikonnikov <eugene.zaikonnikov@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: "dmitry.torokhov@xxxxxxxxx" <dmitry.torokhov@xxxxxxxxx>
• [PATCH v2 0/3] mfd: rn5t618: add ADC support
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH RFC v2 3/3] mfd: rn5t618: add ADC subdevice for RN5T618
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v2 1/3] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH RFC v2 2/3] mfd: rn5t618: add IRQ definitions for RN5T618
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH v3 2/2] iio: srf04: add power management feature
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: devantech-srf04.yaml: add pm feature
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 0/2] iio: srf04: add support for power management
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 2/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH 0/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH 1/2] iio: vcnl4000: Use a single return when getting IIO_CHAN_INFO_RAW
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH 2/4] iio: imu: adis: Refactor adis_initial_startup
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 4/4] iio: adis16460: Make use of __adis_initial_startup
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/4] iio: adis16480: Make use of __adis_initial_startup
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/4] iio: imu: adis: Add self_test_reg variable
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 7/9] iio: imu: inv_mpu6050: add support of ICM20690
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 2/9] iio: imu: inv_mpu6050: cleanup spi support
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 6/9] dt-bindings: add description for iam20680
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 3/9] iio: imu: inv_mpu6050: add support of ICM20609 & ICM20689
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 0/9] Add support of similar chips
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 9/9] iio: imu: inv_mpu6050: fix LPF bandwidth setting
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 4/9] dt-bindings: add description for icm20609 and icm20689
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 8/9] dt-bindings: add description for icm20690
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 5/9] iio: imu: inv_mpu6050: add support of IAM20680
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 1/9] dt-bindings: iio: imu: inv_mpu6050: add missing entry for mpu6000
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v1] iio: accel: st_accel: Use st_sensors_dev_name_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] mfd: rn5t618: add ADC subdevice for RC5T619
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/5] mfd: rn5t618: mark ADC control register volatile
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc: at91-sama5d2_adc: handle unfinished conversions
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: at91-sama5d2_adc: update for other trigger usage
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v4 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PULL] Second set of IIO new device support, cleanups and minor fixes for the 5.6 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v1 2/2] iio: adc: modify NPCM reset support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 1/2] dt-binding: iio: add NPCM ADC reset support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH 3/5] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PULL] Second set of IIO new device support, cleanups and minor fixes for the 5.6 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: stm32-dac: better handle reset controller failures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: dac: stm32-dac: use reset controller only at probe time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] dt-bindings: iio: accel: kxcjk1013: Document mount-matrix property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: accel: kxcjk1013: Support orientation matrix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: imu: st_lsm6dsx: add mount matrix support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: don't print an error on probe deferral
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: amplifiers: hmc425a: Add support for HMC425A step attenuator with gpio interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adis16480: add compatible entry for ADIS16490
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: adis16480: Add support for ADIS16490
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: accel: bma400: prevent setting accel scale too low
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: imu/mpu6050: support dual-edge IRQ
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: add fifo temperature data support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: magnetometer: ak8975: Convert to use device_get_match_data()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: magnetometer: ak8975: Get rid of platform data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: frequency: adf4371: Fix divide by zero exception bug
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 V3] iio: adc: ad7124: Set IRQ type to falling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2 V3] iio: adc: ad-sigma-delta: Allow custom IRQ flags
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: add fifo temperature data support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] dt-bindings: iio: accel: kxcjk1013: Document mount-matrix property
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v1 1/2] iio: accel: kxcjk1013: Support orientation matrix
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH 1/5] mfd: rn5t618: mark ADC control register volatile
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH 2/5] mfd: rn5t618: add ADC subdevice for RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH 0/5] mfd: rn5t618: add ADC support
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH 3/5] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [RFC PATCH 5/5] mfd: rn5t618: add ADC subdevice for RN5T618
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [RFC PATCH 4/5] mfd: rn5t618: add IRQ definitions for RN5T618
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v4 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: "dmitry.torokhov@xxxxxxxxx" <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/2 v4] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: at91-sama5d2_adc: update for other trigger usage
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc: at91-sama5d2_adc: handle unfinished conversions
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.19 482/671] iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v4 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v4 0/7] Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH AUTOSEL 4.19 006/671] iio: fix position relative kernel version
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 482/671] iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 523/671] iio: dac: ad5380: fix incorrect assignment to val
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: amplifiers: hmc425a: Add support for HMC425A step attenuator with gpio interface
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 286/371] iio: dac: ad5380: fix incorrect assignment to val
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.19 482/671] iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 195/251] iio: dac: ad5380: fix incorrect assignment to val
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v2] iio: imu: inv_mpu6050: add fifo temperature data support
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.4 132/174] iio: dac: ad5380: fix incorrect assignment to val
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 047/205] iio: imu: st_lsm6dsx: fix gyro gain definitions for LSM9DS1
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: adis16480: Add support for ADIS16490
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: adis16480: add compatible entry for ADIS16490
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2] iio: accel: bma400: prevent setting accel scale too low
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] iio: accel: bma400: integer underflow setting accel scale
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH] iio: accel: bma400: integer underflow setting accel scale
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: accel: bma400: integer underflow setting accel scale
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: accel: bma400: integer underflow setting accel scale
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] iio: accel: bma400: integer underflow setting accel scale
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH] iio: accel: bma400: integer underflow setting accel scale
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v1 2/2] iio: magnetometer: ak8975: Convert to use device_get_match_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/2] iio: magnetometer: ak8975: Get rid of platform data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: accel: kxcjk1013: Support orientation matrix
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] dt-bindings: iio: accel: kxcjk1013: Document mount-matrix property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: devantech-srf04.yaml: add pm feature
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ad7606: Fix wrong maxItems value
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH] iio: frequency: adf4371: Fix divide by zero exception bug
  • From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] dt-bindings: iio: adc: ad7606: Fix wrong maxItems value
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PATCH v2 05/17] dt-bindings: atmel-isi: add microchip,sam9x60-isi
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PULL] Second set of IIO fixes for the 5.5 cycle.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 15/17] dt-bindings: arm: add sam9x60-ek board
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 11/17] dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 09/17] dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 08/17] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 07/17] dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 06/17] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 05/17] dt-bindings: atmel-isi: add microchip,sam9x60-isi
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 03/17] dt-bindings: atmel-can: add microchip,sam9x60-can
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 02/17] dt-bindings: at_xdmac: add microchip,sam9x60-dma
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 01/17] dt-bindings: at_xdmac: remove wildcard
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: add fifo temperature data support
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: amplifiers: hmc425a: Add support for HMC425A step attenuator with gpio interface
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: amplifiers: hmc425a: Add support for HMC425A step attenuator with gpio interface
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v2 2/3] iio: chemical: atlas-sensor: add DO-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v2 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v2 0/3] iio: chemical: atlas-sensor: add DO support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v2 15/17] dt-bindings: arm: add sam9x60-ek board
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 08/17] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 12/17] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 13/17] dt-bindings: atmel-usart: remove wildcard
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 11/17] dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 06/17] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 09/17] dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 07/17] dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 04/17] dt-bindings: atmel-tcb: add microchip,sam9x60-tcb
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 05/17] dt-bindings: atmel-isi: add microchip,sam9x60-isi
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 03/17] dt-bindings: atmel-can: add microchip,sam9x60-can
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 02/17] dt-bindings: at_xdmac: add microchip,sam9x60-dma
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 01/17] dt-bindings: at_xdmac: remove wildcard
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2 v4] iio: light: Add DT bindings for GP2AP002
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu/mpu6050: support dual-edge IRQ
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: adis: use new `delay` structure for SPI transfer delays
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: stm32-dfsdm: fix single conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 9/9] iio: st_sensors: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 8/9] iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: st_gyro: Correct data for LSM9DS0 gyro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: check return value from st_lsm6dsx_sensor_set_enable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: amplifiers: hmc425a: Add support for HMC425A step attenuator with gpio interface
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 2/2 v4] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 3/3] MAINTAINERS: add entry for hmc425a driver.
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 1/3] iio: amplifiers: hmc425a: Add support for HMC425A step attenuator with gpio interface
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PATCH v1 9/9] iio: st_sensors: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 8/9] iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] iio: st_gyro: Correct data for LSM9DS0 gyro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: adc: stm32-adc: don't print an error on probe deferral
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 1/2] iio: dac: stm32-dac: use reset controller only at probe time
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 2/2] iio: dac: stm32-dac: better handle reset controller failures
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 0/2] iio: dac: stm32-dac: improve reset controller use
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 2/3] iio: adc: at91-sama5d2_adc: handle unfinished conversions
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v2 3/3] iio: adc: at91-sama5d2_adc: update for other trigger usage
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v2 1/3] iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v2 0/3] Enhancements to at91-sama5d2_adc driver
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PULL] Second set of IIO fixes for the 5.5 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] SFH: Transport Driver to add support of AMD sensor fusion Hub (SFH)
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 2/2 V3] iio: adc: ad7124: Set IRQ type to falling
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 0/2 V3] iio: adc: ad7124 fix wrong irq flag
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 1/2 V3] iio: adc: ad-sigma-delta: Allow custom IRQ flags
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v3] iio: imu: st_lsm6dsx: add mount matrix support
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH v2 1/2] iio: adis: Introduce timeouts structure
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v1 1/2] iio: accel: kxcjk1013: Support orientation matrix
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v1 2/2] dt-bindings: iio: accel: kxcjk1013: Document mount-matrix property
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2 v4] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PULL] Second set of IIO fixes for the 5.5 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] Second set of IIO fixes for the 5.5 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] Second set of IIO fixes for the 5.5 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2 v4] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v4] iio: light: Add DT bindings for GP2AP002
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v3] iio: imu/mpu6050: support dual-edge IRQ
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v2] iio: imu/mpu6050: support dual-edge IRQ
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v2] iio: imu: st_lsm6dsx: add mount matrix support
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH v2] iio: imu: st_lsm6dsx: add mount matrix support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-sensor: add helper function atlas_buffer_num_channels()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu/mpu6050: support dual-edge IRQ
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: dht11 remove TODO since it doesn't make sense
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: vcnl4000: update sampling rates for vcnl4040
  • From: Guido Günther <agx@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adis: Remove startup_delay
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adis: Introduce timeouts structure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: vcnl4000: update sampling rates for vcnl4200
  • From: Guido Günther <agx@xxxxxxxxxxx>
• Re: [PATCH V2] iio: ad_sigma_delta: Add custom irq flags
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: vcnl4000: update sampling rates for vcnl4040
  • From: Guido Günther <agx@xxxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-sensor: add DO-SM module support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: at91-sama5d2_adc: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: frequency: adf4371: Fix divide by zero exception bug
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: stm32-adc: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: srf04: add power management feature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v3] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/17] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 16/16] ARM: dts: at91: sam9x60: add device tree for soc and board
  • From: <Nicolas.Ferre@xxxxxxxxxxxxx>
• [PATCH v2 17/17] ARM: dts: at91: sam9x60: add device tree for soc and board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 15/17] dt-bindings: arm: add sam9x60-ek board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 14/17] dt-bindings: atmel-usart: add microchip,sam9x60-{usart, dbgu}
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 16/17] ARM: at91/defconfig: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 13/17] dt-bindings: atmel-usart: remove wildcard
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 12/17] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 11/17] dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 09/17] dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 08/17] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 07/17] dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 06/17] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 05/17] dt-bindings: atmel-isi: add microchip,sam9x60-isi
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 04/17] dt-bindings: atmel-tcb: add microchip,sam9x60-tcb
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 03/17] dt-bindings: atmel-can: add microchip,sam9x60-can
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 02/17] dt-bindings: at_xdmac: add microchip,sam9x60-dma
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 01/17] dt-bindings: at_xdmac: remove wildcard
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 00/17] add device tree for SAM9X60 SoC and SAM9X60-EK board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• Re: [PATCH 11/16] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 03/16] dt-bindings: atmel-tcb: add microchip,<chip>-tcb
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 13/16] dt-bindings: atmel-usart: add microchip,<chip>-usart
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 11/16] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 03/16] dt-bindings: atmel-tcb: add microchip,<chip>-tcb
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 03/16] dt-bindings: atmel-tcb: add microchip,<chip>-tcb
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/2 v3] iio: light: Add DT bindings for GP2AP002
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratio
  • From: Olivier MOYSAN <olivier.moysan@xxxxxx>
• Re: [PATCH v2] iio: adc: stm32-dfsdm: fix single conversion
  • From: Olivier MOYSAN <olivier.moysan@xxxxxx>
• Re: [PATCH v4 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 2/2 v3] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v3] iio: light: Add DT bindings for GP2AP002
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PULL] First set of IIO new device support, features and cleanups for the 5.6 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Applied "dt-bindings: spi_atmel: add microchip,sam9x60-spi" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 07/16] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2] iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2] iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2] iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH v2] iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2] iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 2/2] iio: srf04: add power management feature
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: devantech-srf04.yaml: add pm feature
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 0/2] iio: srf04: add support for power management
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 4/4] SFH: Create HID report to Enable support of AMD sensor fusion Hub (SFH)
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH 3/4] SFH: Transport Driver to add support of AMD sensor fusion Hub (SFH)
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH 2/4] SFH: PCI driver to add support of AMD sensor fusion Hub using HID framework
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH 1/4] SFH: Add maintainer list and documentation for AMD SFH based on HID framework
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH 0/4] SFH: Add Support for AMD Sensor Fusion Hub
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: devantech-srf04.yaml: add pm feature
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-sensor: add DO-SM module support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: input: Add docs for ADC driven joystick.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: devantech-srf04.yaml: add pm feature
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2 v1] iio: light: Add DT bindings for GP2AP002
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/2] iio: light: vcnl4000: update sampling rates for vcnl4040
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH 1/2] iio: light: vcnl4000: update sampling rates for vcnl4200
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH 0/2] iio: light: vcnl4000: update sampling rates
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• Re: [PATCH] iio: buffer-dmaengine: Use dma_request_chan() directly for channel request
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 16/16] ARM: dts: at91: sam9x60: add device tree for soc and board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 14/16] dt-bindings: arm: add sam9x60-ek board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 08/16] dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 15/16] ARM: at91/defconfig: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 13/16] dt-bindings: atmel-usart: add microchip,<chip>-usart
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 12/16] dt-bindings: spi_atmel: add microchip,sam9x60-spi
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 09/16] dt-bindings: atmel-smc: add microchip,sam9x60-smc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 11/16] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 10/16] dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 07/16] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 06/16] dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 02/16] dt-bindings: atmel-can: add microchip,sam9x60-can
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 05/16] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 04/16] dt-bindings: atmel-isi: add microchip,sam9x60-isi
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 03/16] dt-bindings: atmel-tcb: add microchip,<chip>-tcb
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 01/16] dt-bindings: at_xdmac: add entry for microchip compatibles
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 00/16] add device tree for SAM9X60 SoC and SAM9X60-EK board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• Re: [Linux-stm32] [PATCH v2] iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Olivier MOYSAN <olivier.moysan@xxxxxx>
• [PATCH v3] iio: adc: stm32-adc: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2] iio: adc: stm32-adc: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: frequency: Add docs for LTC6952
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: stm32-adc: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] iio: frequency: adf4371: Fix divide by zero exception bug
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PATCH] iio: buffer-dmaengine: Use dma_request_chan() directly for channel request
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 2/2 v1] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2] iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2] iio: adc: stm32-adc: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3] iio: adc: at91-sama5d2_adc: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] iio: adis: Introduce timeouts structure
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 2/2] iio: adis: Remove startup_delay
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH V2] iio: ad_sigma_delta: Add custom irq flags
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: gyro: adi16136: construct adis data on probe vs static on driver
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH] iio: ad_sigma_delta: Add custom irq flags
  • From: "Tachici, Alexandru" <Alexandru.Tachici@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu/mpu6050: support dual-edge IRQ
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: ad_sigma_delta: Add custom irq flags
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• [PATCH v2] iio: imu/mpu6050: support dual-edge IRQ
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH] iio: ad_sigma_delta: Add custom irq flags
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] iio: imu/mpu6050: support dual-edge IRQ
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: ad_sigma_delta: Add custom irq flags
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: ad_sigma_delta: Add custom irq flags
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v2] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2 v1] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-sensor: add DO-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH] iio: chemical: atlas-sensor: add DO-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: Display got wrong rotation after hid_sensor_accel_3d is loaded
  • From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
• [PATCH v3 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v3 0/7] Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PULL] First set of IIO new device support, features and cleanups for the 5.6 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] First set of IIO new device support, features and cleanups for the 5.6 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] Second set of IIO fixes for the 5.5 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v1] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/5] IIO: Ingenic JZ47xx: Add xlate cb to retrieve correct channel idx
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 2/5] dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 4/5] dt-bindings: input: Add docs for ADC driven joystick.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH] iio: humidity: dht11 remove TODO since it doesn't make sense
  • From: Kent Gustavsson <kent@xxxxxxxxxx>
• [PATCH] iio: imu/mpu6050: support dual-edge IRQ
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH v2] iio: imu: st_lsm6dsx: add mount matrix support
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: add mount matrix support
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: add mount matrix support
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] iio: chemical: atlas-sensor: add helper function atlas_buffer_num_channels()
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: Introduce the TI DAC8771 DAC driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 1/2] dt-binding: iio: dac8771: Add TI DAC8771 binding
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: Let's design the next-gen libiio!
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: add mount matrix support
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: Let's design the next-gen libiio!
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2 v1] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: Display got wrong rotation after hid_sensor_accel_3d is loaded
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH 2/2] iio: srf04: add power management feature
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: devantech-srf04.yaml: add pm feature
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 0/2] iio: srf04: add support for power management
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: check return value from st_lsm6dsx_sensor_set_enable
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Display got wrong rotation after hid_sensor_accel_3d is loaded
  • From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: chemical: Add bindings for Dynament Premier series single gas sensor
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: add support for Dynament Premier series single gas sensor
  • From: YuDong Zhang <mtwget@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: chemical: add support for Dynament Premier series single gas sensor
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: Let's design the next-gen libiio!
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: Let's design the next-gen libiio!
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2 v1] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Display got wrong rotation after hid_sensor_accel_3d is loaded
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: light: vcnl4000: Fix scale for vcnl4040
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: buffer: align the size of scan bytes to size of the largest element
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: add fifo temperature data support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 1/3] dt-bindings: iio: accel: bma400: add bindings
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 1/3] dt-bindings: iio: accel: bma400: add bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2 v1] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v1] iio: light: Add DT bindings for GP2AP002
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: light: vcnl4000: Fix scale for vcnl4040
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v2] iio: light: vcnl4000: Fix scale for vcnl4040
  • From: Guido Günther <agx@xxxxxxxxxxx>
• Re: [PATCH v3] iio: buffer: align the size of scan bytes to size of the largest element
  • From: Lars Möllendorf <lars.moellendorf@xxxxxxxxxx>
• Re: [PATCH] iio: light: vcnl4000: Fix scale for vcnl4040
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: Display got wrong rotation after hid_sensor_accel_3d is loaded
  • From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
• Re: [PATCH v8 1/3] dt-bindings: iio: accel: bma400: add bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: chemical: Add bindings for Dynament Premier series single gas sensor
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] iio: buffer: align the size of scan bytes to size of the largest element
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: Display got wrong rotation after hid_sensor_accel_3d is loaded
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Display got wrong rotation after hid_sensor_accel_3d is loaded
  • From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
• RE: [PATCH v4 1/3] iio: pressure: Add driver for DLH pressure sensors
  • From: "Denis, Tomislav AVL DiTEST" <Tomislav.Denis@xxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: add fifo temperature data support
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: adc: at91-sama5d2_adc: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 4/4] iio: accel: bma180: BMA254 support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: pressure: bmp280: Drop ACPI support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: pressure: bmp280: Allow device to be enumerated from ACPI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: convert sd modulator to json-schema
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: adc: ltc2496: provide device tree binding document
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: buffer: rename 'read_first_n' callback to 'read'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: buffer-dmaengine: Report buffer length requirements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] bindings: iio: pressure: Add documentation for dlh driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: pressure: Add driver for DLH pressure sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: buffer-dmaengine: Add module information
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: use debugfs_remove_recursive() on IIO unload
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: accel: bma180: BMA254 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/6] iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: accel: bma180: Use explicit member assignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: accel: bma180: Basic regulator support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: accel: bma180: Add dev helper variable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] Device tree bindings for TI HDC20x0 humidity and temperature sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: buffer: align the size of scan bytes to size of the largest element
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/6] iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/6] iio: imu: st_lsm6dsx: check if master_enable is located in primary page
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/6] iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/6] iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/6] iio: imu: st_lsm6dsx: check if pull_up is located in primary page
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: iio_compute_scan_bytes does not seem to account for alignment if first channel uses more storagebits than its successors
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/6] iio: imu: st_lsm6dsx: check if pull_up is located in primary page
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: pms7003: fix unmet triggered buffer dependency
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: remove unneeded semicolon
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-ph-sensor: rename atlas-ph-sensor to atlas-sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 9/9] iio: st_sensors: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 8/9] iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 7/9] iio: st_sensors: Describe function parameters in kernel-doc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 6/9] iio: pressure: st_press: Mark default_press_pdata with __maybe_unused
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 5/9] iio: accel: st_accel: Mark default_accel_pdata with __maybe_unused
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 4/9] iio: gyro: st_gyro: Mark gyro_pdata with __maybe_unused
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 3/9] iio: pressure: st_press: Drop unnecessary #else branch for ACPI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/9] iio: accel: st_accel: Drop unnecessary #else branch for ACPI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/9] iio: light: st_uvis25: Drop unneeded header inclusion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 3/3] iio: st_lsm6dsx: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/3] iio: st_lsm6dsx: Drop unneeded OF code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>