Re: [PATCH v2 1/2] iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch() helper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 14, 2020 at 12:22:45PM +0000, Eugen Hristev - M18282 wrote:
> On 13.04.2020 20:05, Jonathan Cameron wrote:
> > On Wed, 4 Mar 2020 10:42:18 +0200
> > Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> wrote:
> > 
> >> This change moves the logic to check if the current channel is the
> >> touchscreen channel to a separate helper.
> >> This reduces some code duplication, but the main intent is to re-use this
> >> in the next patches.
> >>
> >> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
> > Eugen / Ludovic,
> > 
> > Have you had a chance to look at this series?
> 
> Hi Jonathan,
> 
> Does the patch apply correctly for you ?

No issue on my side to apply them (v5.7-rc1 and next).

> I will try to test it , if I manage to apply it.
> I can only test the ADC though because at this moment I do not have a 
> touchscreen at disposal.

Same here, not able to test the touchscreen but it doesn't seem very risky.

> 
> Meanwhile, the code looks good for me,
> 
> Reviewed-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>

You can add mine as well:

Reviewed-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>

Regards

Ludovic

> 
> By the way, I do not know if my two pending patches on this driver will 
> conflict or not.
> 
> Eugen
> 
> > 
> > Thanks,
> > 
> > Jonathan
> > 
> >> ---
> >>
> >> This patchset continues discussion:
> >>     https://lore.kernel.org/linux-iio/20191023082508.17583-1-alexandru.ardelean@xxxxxxxxxx/
> >> Apologies for the delay.
> >>
> >> Changelog v1 -> v2:
> >> * added patch 'iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch()
> >>    helper'
> >> * renamed at91_adc_buffer_postenable() -> at91_adc_buffer_preenable()
> >>    - at91_adc_buffer_postenable() - now just calls
> >>      iio_triggered_buffer_postenable() if the channel isn't the touchscreen
> >>      channel
> >> * renamed at91_adc_buffer_predisable() -> at91_adc_buffer_postdisable()
> >>    - at91_adc_buffer_predisable() - now just calls
> >>      iio_triggered_buffer_predisable() if the channel isn't the touchscreen
> >>      channel
> >>
> >>   drivers/iio/adc/at91-sama5d2_adc.c | 31 +++++++++++++++---------------
> >>   1 file changed, 15 insertions(+), 16 deletions(-)
> >>
> >> diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
> >> index a5c7771227d5..f2a74c47c768 100644
> >> --- a/drivers/iio/adc/at91-sama5d2_adc.c
> >> +++ b/drivers/iio/adc/at91-sama5d2_adc.c
> >> @@ -873,18 +873,24 @@ static int at91_adc_dma_start(struct iio_dev *indio_dev)
> >>        return 0;
> >>   }
> >>
> >> +static bool at91_adc_current_chan_is_touch(struct iio_dev *indio_dev)
> >> +{
> >> +     struct at91_adc_state *st = iio_priv(indio_dev);
> >> +
> >> +     return !!bitmap_subset(indio_dev->active_scan_mask,
> >> +                            &st->touch_st.channels_bitmask,
> >> +                            AT91_SAMA5D2_MAX_CHAN_IDX + 1);
> >> +}
> >> +
> >>   static int at91_adc_buffer_postenable(struct iio_dev *indio_dev)
> >>   {
> >>        int ret;
> >>        struct at91_adc_state *st = iio_priv(indio_dev);
> >>
> >>        /* check if we are enabling triggered buffer or the touchscreen */
> >> -     if (bitmap_subset(indio_dev->active_scan_mask,
> >> -                       &st->touch_st.channels_bitmask,
> >> -                       AT91_SAMA5D2_MAX_CHAN_IDX + 1)) {
> >> -             /* touchscreen enabling */
> >> +     if (at91_adc_current_chan_is_touch(indio_dev))
> >>                return at91_adc_configure_touch(st, true);
> >> -     }
> >> +
> >>        /* if we are not in triggered mode, we cannot enable the buffer. */
> >>        if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES))
> >>                return -EINVAL;
> >> @@ -906,12 +912,9 @@ static int at91_adc_buffer_predisable(struct iio_dev *indio_dev)
> >>        u8 bit;
> >>
> >>        /* check if we are disabling triggered buffer or the touchscreen */
> >> -     if (bitmap_subset(indio_dev->active_scan_mask,
> >> -                       &st->touch_st.channels_bitmask,
> >> -                       AT91_SAMA5D2_MAX_CHAN_IDX + 1)) {
> >> -             /* touchscreen disable */
> >> +     if (at91_adc_current_chan_is_touch(indio_dev))
> >>                return at91_adc_configure_touch(st, false);
> >> -     }
> >> +
> >>        /* if we are not in triggered mode, nothing to do here */
> >>        if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES))
> >>                return -EINVAL;
> >> @@ -1886,14 +1889,10 @@ static __maybe_unused int at91_adc_resume(struct device *dev)
> >>                return 0;
> >>
> >>        /* check if we are enabling triggered buffer or the touchscreen */
> >> -     if (bitmap_subset(indio_dev->active_scan_mask,
> >> -                       &st->touch_st.channels_bitmask,
> >> -                       AT91_SAMA5D2_MAX_CHAN_IDX + 1)) {
> >> -             /* touchscreen enabling */
> >> +     if (at91_adc_current_chan_is_touch(indio_dev))
> >>                return at91_adc_configure_touch(st, true);
> >> -     } else {
> >> +     else
> >>                return at91_adc_configure_trigger(st->trig, true);
> >> -     }
> >>
> >>        /* not needed but more explicit */
> >>        return 0;
> > 
> 



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux