On Wed, 15 Apr 2020 08:43:52 +0200 ludovic.desroches@xxxxxxxxxxxxx wrote: > On Tue, Apr 14, 2020 at 12:22:45PM +0000, Eugen Hristev - M18282 wrote: > > On 13.04.2020 20:05, Jonathan Cameron wrote: > > > On Wed, 4 Mar 2020 10:42:18 +0200 > > > Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> wrote: > > > > > >> This change moves the logic to check if the current channel is the > > >> touchscreen channel to a separate helper. > > >> This reduces some code duplication, but the main intent is to re-use this > > >> in the next patches. > > >> > > >> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> > > > Eugen / Ludovic, > > > > > > Have you had a chance to look at this series? > > > > Hi Jonathan, > > > > Does the patch apply correctly for you ? > > No issue on my side to apply them (v5.7-rc1 and next). > > > I will try to test it , if I manage to apply it. > > I can only test the ADC though because at this moment I do not have a > > touchscreen at disposal. > > Same here, not able to test the touchscreen but it doesn't seem very risky. > > > > > Meanwhile, the code looks good for me, > > > > Reviewed-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> > > You can add mine as well: > > Reviewed-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx> For both of you - tags for both patches or just this one? Thanks, Jonathan > > Regards > > Ludovic > > > > > By the way, I do not know if my two pending patches on this driver will > > conflict or not. > > > > Eugen > > > > > > > > Thanks, > > > > > > Jonathan > > > > > >> --- > > >> > > >> This patchset continues discussion: > > >> https://lore.kernel.org/linux-iio/20191023082508.17583-1-alexandru.ardelean@xxxxxxxxxx/ > > >> Apologies for the delay. > > >> > > >> Changelog v1 -> v2: > > >> * added patch 'iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch() > > >> helper' > > >> * renamed at91_adc_buffer_postenable() -> at91_adc_buffer_preenable() > > >> - at91_adc_buffer_postenable() - now just calls > > >> iio_triggered_buffer_postenable() if the channel isn't the touchscreen > > >> channel > > >> * renamed at91_adc_buffer_predisable() -> at91_adc_buffer_postdisable() > > >> - at91_adc_buffer_predisable() - now just calls > > >> iio_triggered_buffer_predisable() if the channel isn't the touchscreen > > >> channel > > >> > > >> drivers/iio/adc/at91-sama5d2_adc.c | 31 +++++++++++++++--------------- > > >> 1 file changed, 15 insertions(+), 16 deletions(-) > > >> > > >> diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c > > >> index a5c7771227d5..f2a74c47c768 100644 > > >> --- a/drivers/iio/adc/at91-sama5d2_adc.c > > >> +++ b/drivers/iio/adc/at91-sama5d2_adc.c > > >> @@ -873,18 +873,24 @@ static int at91_adc_dma_start(struct iio_dev *indio_dev) > > >> return 0; > > >> } > > >> > > >> +static bool at91_adc_current_chan_is_touch(struct iio_dev *indio_dev) > > >> +{ > > >> + struct at91_adc_state *st = iio_priv(indio_dev); > > >> + > > >> + return !!bitmap_subset(indio_dev->active_scan_mask, > > >> + &st->touch_st.channels_bitmask, > > >> + AT91_SAMA5D2_MAX_CHAN_IDX + 1); > > >> +} > > >> + > > >> static int at91_adc_buffer_postenable(struct iio_dev *indio_dev) > > >> { > > >> int ret; > > >> struct at91_adc_state *st = iio_priv(indio_dev); > > >> > > >> /* check if we are enabling triggered buffer or the touchscreen */ > > >> - if (bitmap_subset(indio_dev->active_scan_mask, > > >> - &st->touch_st.channels_bitmask, > > >> - AT91_SAMA5D2_MAX_CHAN_IDX + 1)) { > > >> - /* touchscreen enabling */ > > >> + if (at91_adc_current_chan_is_touch(indio_dev)) > > >> return at91_adc_configure_touch(st, true); > > >> - } > > >> + > > >> /* if we are not in triggered mode, we cannot enable the buffer. */ > > >> if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES)) > > >> return -EINVAL; > > >> @@ -906,12 +912,9 @@ static int at91_adc_buffer_predisable(struct iio_dev *indio_dev) > > >> u8 bit; > > >> > > >> /* check if we are disabling triggered buffer or the touchscreen */ > > >> - if (bitmap_subset(indio_dev->active_scan_mask, > > >> - &st->touch_st.channels_bitmask, > > >> - AT91_SAMA5D2_MAX_CHAN_IDX + 1)) { > > >> - /* touchscreen disable */ > > >> + if (at91_adc_current_chan_is_touch(indio_dev)) > > >> return at91_adc_configure_touch(st, false); > > >> - } > > >> + > > >> /* if we are not in triggered mode, nothing to do here */ > > >> if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES)) > > >> return -EINVAL; > > >> @@ -1886,14 +1889,10 @@ static __maybe_unused int at91_adc_resume(struct device *dev) > > >> return 0; > > >> > > >> /* check if we are enabling triggered buffer or the touchscreen */ > > >> - if (bitmap_subset(indio_dev->active_scan_mask, > > >> - &st->touch_st.channels_bitmask, > > >> - AT91_SAMA5D2_MAX_CHAN_IDX + 1)) { > > >> - /* touchscreen enabling */ > > >> + if (at91_adc_current_chan_is_touch(indio_dev)) > > >> return at91_adc_configure_touch(st, true); > > >> - } else { > > >> + else > > >> return at91_adc_configure_trigger(st->trig, true); > > >> - } > > >> > > >> /* not needed but more explicit */ > > >> return 0; > > > > >
