From: Manivannan Sadhasivam <mani@xxxxxxxxxx> This commit adds devicetree binding for AMS CCS811 VOC sensor. Signed-off-by: Manivannan Sadhasivam <mani@xxxxxxxxxx> --- .../bindings/iio/chemical/ams,ccs811.yaml | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml diff --git a/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml b/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml new file mode 100644 index 000000000000..5cb068666a3e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/ams,ccs811.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS CCS811 VOC Sensor + +maintainers: + - Narcisa Vasile <narcisaanamaria12@xxxxxxxxx> + +description: | + Ultra-Low Power Digital Gas Sensor for Monitoring Indoor Air Quality. + +properties: + compatible: + enum: + - ams,ccs811 + reg: + maxItems: 1 + + reset-gpios: + description: GPIO connected to the nRESET line. This is an active low + input to CCS811. + maxItems: 1 + + wakeup-gpios: + description: GPIO connected to the nWAKE line. This is an active low + input to CCS811. + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + voc@5b { + compatible = "ams,ccs811"; + reg = <0x5b>; + reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>; + wakeup-gpios = <&gpioa 12 GPIO_ACTIVE_LOW>; + }; + }; + +... -- 2.17.1
