[PATCH v2 0/3] Add Reset and Wakeup support for CCS811

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Manivannan Sadhasivam <mani@xxxxxxxxxx>

Hello,

This patchset adds external reset and wakeup support for CCS811 VOC
gas sensor. The nRESET and nWAKE pins available on the device are
utilised to provide these functionalities.

The patchset has been validated using CCS811 connected to STM32MP1 based
board over I2C.

While at it, the devicetree yaml binding and OF match table for this sensor
are also added.

Thanks,
Mani

Changes in v2:

* Fixed DT binding schema and switched to dual license (GPL/BSD)
* Returned actual error code from devm_gpiod_get_optional()
* Dropped of.h include and of_match_ptr()

Manivannan Sadhasivam (3):
  dt-bindings: iio: chemical: Add binding for CCS811 VOC sensor
  iio: chemical: Add support for external Reset and Wakeup in CCS811
  iio: chemical: Add OF match table for CCS811 VOC sensor

 .../bindings/iio/chemical/ams,ccs811.yaml     | 51 ++++++++++
 drivers/iio/chemical/ccs811.c                 | 95 +++++++++++++++++--
 2 files changed, 138 insertions(+), 8 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml

-- 
2.17.1




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux