Proximity sensor driver based on light/vcnl4000.c code. For now supports only the single on-demand measurement. The VCNL3020 is a fully integrated proximity sensor. Fully integrated means that the infrared emitter is included in the package. It has 16-bit resolution. It includes a signal processing IC and features standard I2C communication interface. It features an interrupt function. Datasheet: http://www.vishay.com/docs/84150/vcnl3020.pdf Signed-off-by: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> --- drivers/iio/proximity/Kconfig | 11 ++ drivers/iio/proximity/Makefile | 1 + drivers/iio/proximity/vcnl3020.c | 235 +++++++++++++++++++++++++++++++ 3 files changed, 247 insertions(+) create mode 100644 drivers/iio/proximity/vcnl3020.c diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig index d53601447da4..b8d2b17e60ac 100644 --- a/drivers/iio/proximity/Kconfig +++ b/drivers/iio/proximity/Kconfig @@ -112,6 +112,17 @@ config SRF08 To compile this driver as a module, choose M here: the module will be called srf08. +config VCNL3020 + tristate "VCNL3020 proximity sensor" + select REGMAP_I2C + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VCNL3020 + proximity sensor. + + To compile this driver as a module, choose M here: the + module will be called vcnl3020. + config VL53L0X_I2C tristate "STMicroelectronics VL53L0X ToF ranger sensor (I2C)" depends on I2C diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile index 0bb5f9de13d6..8245978ced30 100644 --- a/drivers/iio/proximity/Makefile +++ b/drivers/iio/proximity/Makefile @@ -12,5 +12,6 @@ obj-$(CONFIG_RFD77402) += rfd77402.o obj-$(CONFIG_SRF04) += srf04.o obj-$(CONFIG_SRF08) += srf08.o obj-$(CONFIG_SX9500) += sx9500.o +obj-$(CONFIG_VCNL3020) += vcnl3020.o obj-$(CONFIG_VL53L0X_I2C) += vl53l0x-i2c.o diff --git a/drivers/iio/proximity/vcnl3020.c b/drivers/iio/proximity/vcnl3020.c new file mode 100644 index 000000000000..59e1f59a3ed2 --- /dev/null +++ b/drivers/iio/proximity/vcnl3020.c @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Support for Vishay VCNL3020 proximity sensor on i2c bus. + * Based on Vishay VCNL4000 driver code. + * + * TODO: interrupts. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/regmap.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define VCNL3020_PROD_ID 0x21 + +#define VCNL_COMMAND 0x80 /* Command register */ +#define VCNL_PROD_REV 0x81 /* Product ID and Revision ID */ +#define VCNL_PROXIMITY_RATE 0x82 /* Rate of Proximity Measurement */ +#define VCNL_LED_CURRENT 0x83 /* IR LED current for proximity mode */ +#define VCNL_PS_RESULT_HI 0x87 /* Proximity result register, MSB */ +#define VCNL_PS_RESULT_LO 0x88 /* Proximity result register, LSB */ +#define VCNL_PS_ICR 0x89 /* Interrupt Control Register */ + +#define VCNL_PS_LO_THR_HI 0x8a /* High byte of low threshold value */ +#define VCNL_PS_LO_THR_LO 0x8b /* Low byte of low threshold value */ +#define VCNL_PS_HI_THR_HI 0x8c /* High byte of high threshold value */ +#define VCNL_PS_HI_THR_LO 0x8d /* Low byte of high threshold value */ +#define VCNL_ISR 0x8e /* Interrupt Status Register */ +#define VCNL_PS_MOD_ADJ 0x8f /* Proximity Modulator Timing Adjustment */ + +/* Bit masks for COMMAND register */ +#define VCNL_PS_RDY BIT(5) /* proximity data ready? */ +#define VCNL_PS_OD BIT(3) /* start on-demand proximity + * measurement + */ + +#define VCNL_ON_DEMAND_TIMEOUT_US 100000 +#define VCNL_POLL_US 20000 + +/** + * struct vcnl3020_data - vcnl3020 specific data. + * @regmap: device register map. + * @dev: vcnl3020 device. + * @rev: revision id. + * @lock: lock for protecting access to device hardware registers. + */ +struct vcnl3020_data { + struct regmap *regmap; + struct device *dev; + u8 rev; + struct mutex lock; +}; + +static int vcnl3020_get_and_apply_property(struct vcnl3020_data *data, + const char *prop, u32 reg) +{ + int rc; + u32 val; + + rc = device_property_read_u32(data->dev, prop, &val); + if (rc) + return 0; + + rc = regmap_write(data->regmap, reg, val); + if (rc) { + dev_err(data->dev, "Error (%d) setting property (%s)", + rc, prop); + } + + return rc; +} + +static int vcnl3020_init(struct vcnl3020_data *data) +{ + int rc; + unsigned int reg; + + rc = regmap_read(data->regmap, VCNL_PROD_REV, ®); + if (rc) { + dev_err(data->dev, + "Error (%d) reading product revision", rc); + return rc; + } + + if (reg != VCNL3020_PROD_ID) { + dev_err(data->dev, + "Product id (%x) did not match vcnl3020 (%x)", reg, + VCNL3020_PROD_ID); + return -ENODEV; + } + + data->rev = reg; + mutex_init(&data->lock); + + return vcnl3020_get_and_apply_property(data, + "vishay,led-current-microamp", + VCNL_LED_CURRENT); +}; + +static int vcnl3020_measure_proximity(struct vcnl3020_data *data, int *val) +{ + int rc; + unsigned int reg; + __be16 res; + + mutex_lock(&data->lock); + + rc = regmap_write(data->regmap, VCNL_COMMAND, VCNL_PS_OD); + if (rc) + goto err_unlock; + + /* wait for data to become ready */ + rc = regmap_read_poll_timeout(data->regmap, VCNL_COMMAND, reg, + reg & VCNL_PS_RDY, VCNL_POLL_US, + VCNL_ON_DEMAND_TIMEOUT_US); + if (rc) { + dev_err(data->dev, + "Error (%d) reading vcnl3020 command register", rc); + goto err_unlock; + } + + /* high & low result bytes read */ + rc = regmap_bulk_read(data->regmap, VCNL_PS_RESULT_HI, &res, + sizeof(res)); + if (rc) + goto err_unlock; + + *val = be16_to_cpu(res); + +err_unlock: + mutex_unlock(&data->lock); + + return rc; +} + +static const struct iio_chan_spec vcnl3020_channels[] = { + { + .type = IIO_PROXIMITY, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + }, +}; + +static int vcnl3020_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + int rc; + struct vcnl3020_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_PROXIMITY: + rc = vcnl3020_measure_proximity(data, val); + if (rc) + return rc; + return IIO_VAL_INT; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static const struct iio_info vcnl3020_info = { + .read_raw = vcnl3020_read_raw, +}; + +static const struct regmap_config vcnl3020_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = VCNL_PS_MOD_ADJ, +}; + +static int vcnl3020_probe(struct i2c_client *client) +{ + struct vcnl3020_data *data; + struct iio_dev *indio_dev; + struct regmap *regmap; + int rc; + + regmap = devm_regmap_init_i2c(client, &vcnl3020_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "regmap_init failed!"); + return PTR_ERR(regmap); + } + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->regmap = regmap; + data->dev = &client->dev; + + rc = vcnl3020_init(data); + if (rc) + return rc; + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &vcnl3020_info; + indio_dev->channels = vcnl3020_channels; + indio_dev->num_channels = ARRAY_SIZE(vcnl3020_channels); + indio_dev->name = "vcnl3020"; + indio_dev->modes = INDIO_DIRECT_MODE; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct of_device_id vcnl3020_of_match[] = { + { + .compatible = "vishay,vcnl3020", + }, + {} +}; +MODULE_DEVICE_TABLE(of, vcnl3020_of_match); + +static struct i2c_driver vcnl3020_driver = { + .driver = { + .name = "vcnl3020", + .of_match_table = vcnl3020_of_match, + }, + .probe_new = vcnl3020_probe, +}; +module_i2c_driver(vcnl3020_driver); + +MODULE_AUTHOR("Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>"); +MODULE_DESCRIPTION("Vishay VCNL3020 proximity sensor driver"); +MODULE_LICENSE("GPL"); -- 2.21.1
