Linux IIO Development

• Thread Index

• [PATCH v6 2/8] include: fpga: adi-axi-common.h: add version helper macros
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 1/8] include: fpga: adi-axi-common.h: fixup whitespace tab -> space
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 8/8] dt-bindings: iio: adc: add bindings doc for AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 6/8] dt-bindings: iio: adc: add bindings doc for AXI ADC driver
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 0/8] iio: adi-axi-adc,ad9647: Add support for AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: dac: Kconfig: sort symbols alphabetically
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 7/8] iio: adc: ad9467: add support AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 5/8] iio: adc: adi-axi-adc: add support for AXI ADC IP core
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 1/8] include: fpga: adi-axi-common.h: fixup whitespace tab -> space
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 8/8] dt-bindings: iio: adc: add bindings doc for AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 6/8] dt-bindings: iio: adc: add bindings doc for AXI ADC driver
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 3/8] iio: buffer-dmaengine: use %zu specifier for sprintf(align)
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 4/8] iio: buffer-dmaengine: add dev-managed calls for buffer alloc
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 2/8] include: fpga: adi-axi-common.h: add version helper macros
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 0/8] iio: adi-axi-adc,ad9647: Add support for AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH -next] iio: ping: set pa_laser_ping_cfg in of_ping_match
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH -next] iio: ping: set pa_laser_ping_cfg in of_ping_match
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH v2] iio: potentiostat: lmp9100: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: potentiostat: lmp9100: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 2/2] iio: at91-sama5d2_adc: adjust iio_triggered_buffer_{predisable,postenable} positions
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 1/2] iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch() helper
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: light: gp2ap020a00f: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 7/8] iio: adc: ad9467: add support AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 5/8] iio: adc: adi-axi-adc: add support for AXI ADC IP core
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 6/8] dt-bindings: iio: adc: add bindings doc for AXI ADC driver
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 8/8] dt-bindings: iio: adc: add bindings doc for AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 3/8] iio: buffer-dmaengine: use %zu specifier for sprintf(align)
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 4/8] iio: buffer-dmaengine: add dev-managed calls for buffer alloc
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 2/8] include: fpga: adi-axi-common.h: add version helper macros
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 1/8] include: fpga: adi-axi-common.h: fixup whitespace tab -> space
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 0/8] iio: adi-axi-adc,ad9647: Add support for AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v3 6/8] dt-bindings: iio: adc: add bindings doc for AXI ADC driver
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH -next] iio:ad7797: Use correct attribute_group
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: ad7192: Align with parenthesis
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: adc: rockchip_saradc: Add support iio buffers【请注意，邮件由linux-rockchip-bounces+xxm=rock-chips.com@xxxxxxxxxxxxxxxxxxx代发】
  • From: xxm <xxm@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: iio: Add adis16475 documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: imu: Add support for adis16475
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: adis: Add adis_update_bits() APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: imu: adis: Add irq mask variable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: imu: adis: Add Managed device functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: rockchip_saradc: Add support iio buffers【请注意，邮件由linux-rockchip-bounces+xxm=rock-chips.com@xxxxxxxxxxxxxxxxxxx代发】
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [GSOC][RFC] Proposal
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] staging: iio: adc: ad7192: Align with parenthesis
  • From: Nishant Malpani <nish.malpani25@xxxxxxxxx>
• Re: [PATCH v3 6/8] dt-bindings: iio: adc: add bindings doc for AXI ADC driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: iio: Add adis16475 documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/2] iio: trigger: stm32-timer: rename enabled flag
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 2/2] iio: trigger: stm32-timer: add power management support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 0/2] iio: trigger: stm32-timer: add support for power management
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 5/5] dt-bindings: iio: Add adis16475 documentation
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: iio: Add adis16475 documentation
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v2 0/6] irq/irq_sim: try to improve the API
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: iio: Add adis16475 documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH -next] iio:ad7797: Use correct attribute_group
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH v5 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] iio: industrialio-core: Fix debugfs read
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [GSOC][RFC] Proposal
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• Re: [PATCH v3] staging: iio: update TODO
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• Re: [PATCH] iio: adc: rockchip_saradc: Add support iio buffers【请注意，邮件由linux-rockchip-bounces+xxm=rock-chips.com@xxxxxxxxxxxxxxxxxxx代发】
  • From: xxm <xxm@xxxxxxxxxxxxxx>
• [PATCH v3] counter: 104-quad-8: Support Differential Encoder Cable Status
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] counter: 104-quad-8: Support Filter Clock Prescaler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] counter: 104-quad-8: Support Differential Encoder Cable Status
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: pressure: icp10100: add driver for InvenSense ICP-101xx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: industrialio-core: Fix debugfs read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: disable I3C support during device reset
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: adc: ad9467: add support AD9467 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: buffer-dmaengine: add dev-managed calls for buffer alloc/free
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: imu: adis: add a note better explaining state_lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: imu: adis: update 'adis_data' struct doc-string
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: imu: adis: add doc-string for 'adis' struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: adis_buffer: Use new structure for SPI transfer delays
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-tlc4541: Use new structure for SPI transfer delays
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mcp320x: Use new structure for SPI transfer delays
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max1118: Use new structure for SPI transfer delays
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v3 4/5] dt-bindings: input: Add docs for ADC driven joystick.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v3 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v3 2/5] dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v3 1/5] IIO: Ingenic JZ47xx: Add xlate cb to retrieve correct channel idx
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ad9292: Use new structure for SPI transfer delays
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [GSOC][RFC] Proposal
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: sps30: fix missing triggered buffer dependency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: remap SMO8840 to LIS2DH12
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: input: Add docs for ADC driven joystick.
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH] iio: adc: exynos: Silence warning about regulators during deferred probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] staging: iio: update TODO
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: rockchip_saradc: Add support iio buffers
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v2 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH] iio: add a TODO
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• [PATCH v3] staging: iio: update TODO
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• Re: [PATCH v2] staging: iio: update TODO
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• Re: query about locking in IIO
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: max1363: replace mlock with own lock
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• [PATCH v2] iio: adc: max1363: replace mlock with own lock
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• Re: [PATCH v2] staging: iio: update TODO
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: max1363: replace mlock with own lock
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: query about locking in IIO
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: adc: exynos: Silence warning about regulators during deferred probe
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: exynos: Silence warning about regulators during deferred probe
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v2] iio: adc: max1363: replace mlock with own lock
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v5 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [GSOC][RFC] Proposal
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: max1363: replace mlock with own lock
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• [PATCH v2] iio: adc: max1363: replace mlock with own lock
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• Re: [PATCH] iio: adc: max1363: replace mlock with own lock
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• [PATCH v6 1/7] dt-bindings: mfd: rn5t618: Document optional property interrupts
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v6 5/7] rtc: rc5t619: add Ricoh RC5T619 RTC driver
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v6 2/7] mfd: rn5t618: add IRQ support
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v6 6/7] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v6 0/7] mfd: rn5t618: Add RTC/ADC support
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v6 4/7] mfd: rn5t618: add more subdevices
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v6 3/7] mfd: rn5t618: add RTC related registers
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v6 7/7] mfd: rn5t618: cleanup i2c_device_id
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH] iio: chemical: sps30: fix missing triggered buffer dependency
  • From: Petr Štetiar <ynezz@xxxxxxx>
• [PATCH 3/8] iio: core: drop devm_iio_device_free() API call
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 4/8] iio: core: drop devm_iio_trigger_unregister() API call
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 6/8] iio: inkern: drop devm_iio_channel_release{_all} API calls
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 7/8] iio: buffer: drop devm_iio_hw_consumer_free() API call
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 8/8] iio: buffer: drop devm_iio_kfifo_free() API call
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 5/8] iio: core: drop devm_iio_trigger_free() API call
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/8] iio: core: drop devm_iio_triggered_buffer_cleanup() API call
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/8] iio: core: drop devm_iio_device_unregister() API call
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: imu: adis_buffer: Use new structure for SPI transfer delays
  • From: Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx>
• [PATCH] iio: adc: ti-tlc4541: Use new structure for SPI transfer delays
  • From: Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx>
• [PATCH] iio: adc: mcp320x: Use new structure for SPI transfer delays
  • From: Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx>
• [PATCH] iio: adc: max1118: Use new structure for SPI transfer delays
  • From: Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx>
• [PATCH] iio: adc: ad9292: Use new structure for SPI transfer delays
  • From: Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx>
• Re: [PATCH v5 1/2] mfd: rn5t618: add ADC subdevice for RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v5 1/2] mfd: rn5t618: add ADC subdevice for RC5T619
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v3 7/8] iio: adc: ad9467: add support AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 5/8] iio: adc: adi-axi-adc: add support for AXI ADC IP core
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 3/8] iio: buffer-dmaengine: use %zu specifier for sprintf(align)
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 8/8] dt-bindings: iio: adc: add bindings doc for AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 6/8] dt-bindings: iio: adc: add bindings doc for AXI ADC driver
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 1/8] include: fpga: adi-axi-common.h: fixup whitespace tab -> space
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 4/8] iio: buffer-dmaengine: add dev-managed calls for buffer alloc
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 2/8] include: fpga: adi-axi-common.h: add version helper macros
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 0/8] ] iio: adi-axi-adc,ad9647: Add support for AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v2 5/7] dt-bindings: iio: adc: add bindings doc for AXI ADC driver
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 4/7] iio: adc: adi-axi-adc: add support for AXI ADC IP core
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max1363: replace mlock with own lock
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: query about locking in IIO
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v4 4/4] SFH: Create HID report to Enable support of AMD sensor fusion Hub (SFH)
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH v4 3/4] SFH: Transport Driver to add support of AMD Sensor Fusion Hub (SFH)
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH v4 2/4] SFH: PCI driver to add support of AMD sensor fusion Hub using HID framework
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH v4 1/4] SFH: Add maintainers and documentation for AMD SFH based on HID framework
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH v4 0/4] SFH: Add Support for AMD Sensor Fusion Hub
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• Re: [PATCH v2 4/7] iio: adc: adi-axi-adc: add support for AXI ADC IP core
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v4] iio: Add SEMTECH SX9310/9311 sensor driver
  • From: Daniel Campello <campello@xxxxxxxxxxxx>
• [PATCH] iio: adc: max1363: replace mlock with own lock
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• Re: [PATCH v5 1/2] mfd: rn5t618: add ADC subdevice for RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v5 1/2] mfd: rn5t618: add ADC subdevice for RC5T619
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: query about locking in IIO
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• Re: [PATCH v5 1/2] mfd: rn5t618: add ADC subdevice for RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v5 1/2] mfd: rn5t618: add ADC subdevice for RC5T619
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 6/7] iio: adc: ad9467: add support AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 4/7] iio: adc: adi-axi-adc: add support for AXI ADC IP core
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 7/7] dt-bindings: iio: adc: add bindings doc for AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 5/7] dt-bindings: iio: adc: add bindings doc for AXI ADC driver
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 3/7] iio: buffer-dmaengine: add dev-managed calls for buffer alloc
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 2/7] include: fpga: adi-axi-common.h: add version helper macros
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 1/7] include: fpga: adi-axi-common.h: fixup whitespace tab -> space
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 0/7] iio: adi-axi-adc,ad9647: Add support for AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: adc: ad9467: add support AD9467 ADC
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: query about locking in IIO
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• query about locking in IIO
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• [GSOC][RFC] Proposal
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• Re: [PATCH 4/5] iio: adc: ad9467: add support AD9467 ADC
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2] staging: iio: update TODO
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• [PATCH v2] staging: iio: update TODO
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• Re: [PATCH 2/5] iio: adc: axi-adc: add support for AXI ADC IP core
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: buffer-dmaengine: add dev-managed calls for buffer alloc/free
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH 4/5] iio: imu: Add support for adis16475
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 5/5] dt-bindings: iio: Add adis16475 documentation
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 3/5] iio: adis: Add adis_update_bits() APIs
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 0/5] Support ADIS16475 and similar IMUs
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 2/5] iio: imu: adis: Add irq mask variable
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 1/5] iio: imu: adis: Add Managed device functions
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 2/6] iio: accel: adxl372: add sysfs for time registers
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v2 3/6] iio: accel: adxl372: Add sysfs for g thresholds
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v2 6/6] iio: accel: adxl372: Update sysfs docs
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v2 5/6] iio: accel: adxl372: add additional events ABIs
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v2 4/6] iio: accel: adxl372: add iio events
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v2 1/6] iio: accel: adxl372: Add support for FIFO peak mode
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v2 0/6] iio: accel: adxl372: add peak mode
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v2 1/3] iio: imu: adis: add doc-string for 'adis' struct
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 2/3] iio: imu: adis: update 'adis_data' struct doc-string
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 3/3] iio: imu: adis: add a note better explaining state_lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 4/3] iio: dac: ltc2632: remove some unused defines
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: IIO staging TODO
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 10/17] iio: cros_ec: Use cros_ec_cmd()
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH] iio: accel: mma8452: Expose temperature channel
  • From: Dylan Howey <Dylan.Howey@xxxxxxxxxxxxx>
• Re: GSOC 2020 with IIO
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH] staging: iio: update TODO
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• Re: [PATCH] iio: st_sensors: remap SMO8840 to LIS2DH12
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: IIO staging TODO
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] iio: st_sensors: remap SMO8840 to LIS2DH12
  • From: Wen-chien Jesse Sung <jesse.sung@xxxxxxxxxxxxx>
• [PATCH v2] counter: 104-quad-8: Support Differential Encoder Cable Status
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v5 2/2] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v5 0/2] mfd: rn5t618: add ADC support
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v5 1/2] mfd: rn5t618: add ADC subdevice for RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• IIO staging TODO
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• [PATCH v4 2/2] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v4 1/2] mfd: rn5t618: add ADC subdevice for RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v4 0/2] mfd: rn5t618: add ADC support
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH] counter: 104-quad-8: Support Filter Clock Prescaler
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH] counter: 104-quad-8: Support Differential Encoder Cable Status
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2] iio: pressure: icp10100: add driver for InvenSense ICP-101xx
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v2 01/13] iio: imu: inv_mpu6050: enable i2c aux mux bypass only once
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: imu: adis: add doc-string for 'adis' struct
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2] iio: amplifiers: ad8366: add support for HMC1119 Attenuator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: icp10100: add driver for InvenSense ICP-101xx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: amplifiers: ad8366: add support for HMC1119 Attenuator
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: imu: adis: add doc-string for 'adis' struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: imu: adis: add doc-string for 'adis' struct
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2] iio: si1133: read 24-bit signed integer for measurement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: amplifiers: ad8366: add support for HMC1119 Attenuator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 09/13] iio: imu: inv_mpu6050: fix data polling interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: light: vcnl4000: update sampling periods
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: dac: Add docs for AD5770R DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: dac: ad5770r: Add AD5770R support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 12/13] iio: imu: inv_mpu6050: use runtime pm with autosuspend
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v2 09/13] iio: imu: inv_mpu6050: fix data polling interface
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: light: Simplify the current to lux LUT
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: imu: adis: add a note better explaining state_lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: adis: update 'adis_data' struct doc-string
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: imu: adis: add doc-string for 'adis' struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: adxl372: Set iio_chan BE
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: ad7923: Add binding documentation for AD7928
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: adc: ad9467: add support AD9467 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/5] SFH: Add Support for AMD Sensor Fusion Hub
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: adc: axi-adc: add support for AXI ADC IP core
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: buffer-dmaengine: add dev-managed calls for buffer alloc/free
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/3] iio: chemical: atlas-sensor: add DO-SM module support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: industrialio-core: Fix debugfs read
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: vcnl4000: Export near level property for proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• GSOC 2020 with IIO
  • From: Rohit Sarkar <rohitsarkar5398@xxxxxxxxx>
• Re: [PATCH v2 13/13] iio: imu: inv_mpu6050: temperature only work with accel/gyro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 12/13] iio: imu: inv_mpu6050: use runtime pm with autosuspend
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/3] iio: imu: adis: add a note better explaining state_lock
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/3] iio: imu: adis: update 'adis_data' struct doc-string
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/3] iio: imu: adis: add doc-string for 'adis' struct
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v2 11/13] iio: imu: inv_mpu6050: dynamic sampling rate change
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 10/13] iio: imu: inv_mpu6050: factorize fifo enable/disable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 09/13] iio: imu: inv_mpu6050: fix data polling interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: industrialio-core: Fix debugfs read
  • From: "Tachici, Alexandru" <Alexandru.Tachici@xxxxxxxxxx>
• Re: [PATCH v2 08/13] iio: imu: inv_mpu6050: rewrite power and engine management
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/13] iio: imu: inv_mpu6050: fix sleep time when turning regulators on
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/13] iio: imu: inv_mpu6050: delete useless check
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: industrialio-core: Fix debugfs read
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 01/13] iio: imu: inv_mpu6050: enable i2c aux mux bypass only once
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 6/7] iio: light: al3320a implement devm_add_action_or_reset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: enabling a regulator before doing an ADC measurement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: max1363 etc i2c ADC binding conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Question about pressure sensor driver data processing
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH] iio: light: Simplify the current to lux LUT
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: iio: adc: add bindings doc for AD9467 ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: iio: adc: add bindings doc for AXI ADC driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: industrialio-core: Fix debugfs read
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• Re: [PATCH v2 10/17] iio: cros_ec: Use cros_ec_cmd()
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH] iio: pressure: icp10100: add driver for InvenSense ICP-101xx
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: Question about pressure sensor driver data processing
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH 4/5] iio: adc: ad9467: add support AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/5] iio: adc: axi-adc: add support for AXI ADC IP core
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 5/5] dt-bindings: iio: adc: add bindings doc for AD9467 ADC
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/5] dt-bindings: iio: adc: add bindings doc for AXI ADC driver
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/5] iio: buffer-dmaengine: add dev-managed calls for buffer alloc/free
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v5 3/5] iio: amplifiers: hmc425a: Add support for HMC425A attenuator
  • From: "Bia, Beniamin" <Beniamin.Bia@xxxxxxxxxx>
• [PATCH] iio: amplifiers: ad8366: add support for HMC1119 Attenuator
  • From: Sergiu <sergiu.cuciurean@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: max1363 etc i2c ADC binding conversion
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: adc: ad7923: Add binding documentation for AD7928
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Question about pressure sensor driver data processing
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2] iio: si1133: read 24-bit signed integer for measurement
  • From: Maxime Roussin-Bélanger <maxime.roussinbelanger@xxxxxxxxx>
• Re: [PATCH v3 0/5] SFH: Add Support for AMD Sensor Fusion Hub
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• [PATCH v2 13/13] iio: imu: inv_mpu6050: temperature only work with accel/gyro
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 12/13] iio: imu: inv_mpu6050: use runtime pm with autosuspend
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 11/13] iio: imu: inv_mpu6050: dynamic sampling rate change
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 10/13] iio: imu: inv_mpu6050: factorize fifo enable/disable
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 09/13] iio: imu: inv_mpu6050: fix data polling interface
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 08/13] iio: imu: inv_mpu6050: rewrite power and engine management
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 07/13] iio: imu: inv_mpu6050: fix sleep time when turning regulators on
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 06/13] iio: imu: inv_mpu6050: add all signal path resets at init
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 05/13] iio: imu: inv_mpu6050: early init of chip_config for use at setup
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 04/13] iio: imu: inv_mpu6050: simplify polling magnetometer
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 03/13] iio: imu: inv_mpu6050: set power on/off only once during all init
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 02/13] iio: imu: inv_mpu6050: delete useless check
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 01/13] iio: imu: inv_mpu6050: enable i2c aux mux bypass only once
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 00/13] Rework sensors engines and power management
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH] iio: accel: adxl372: Set iio_chan BE
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• enabling a regulator before doing an ADC measurement
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/7] dt-bindings: iio: light: add support for Dyna-Image AL3010
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/2] Device tree bindings for TI HDC20x0 humidity and temperature sensors
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 10/17] iio: cros_ec: Use cros_ec_cmd()
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH 13/13] iio: imu: inv_mpu6050: temperature only work with accel/gyro
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH 12/13] iio: imu: inv_mpu6050: use runtime pm with autosuspend
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH 01/13] iio: imu: inv_mpu6050: enable i2c aux mux bypass only once
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Question about pressure sensor driver data processing
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: light: vcnl4000: update sampling periods for vcnl4040
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH v2 1/2] iio: light: vcnl4000: update sampling periods for vcnl4200
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH v2 0/2] iio: light: vcnl4000: update sampling periods
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH v4 2/2] dt-bindings: iio: dac: Add docs for AD5770R DAC
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v4 1/2] iio: dac: ad5770r: Add AD5770R support
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v4 0/2] iio: dac: AD5770R: Add support
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v2] dt-bindings: iio: adc: ad7923: Add binding documentation for AD7928
  • From: Daniel Junho <djunho@xxxxxxxxx>
• [PATCH RFC v3 3/4] mfd: rn5t618: add IRQ definitions for RN5T618
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 2/4] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 0/4] mfd: rn5t618: add ADC support
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 1/4] mfd: rn5t618: add ADC subdevice for RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH RFC v3 4/4] mfd: rn5t618: add ADC subdevice for RN5T618
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v7 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v7 2/3] iio: chemical: atlas-sensor: add DO-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v7 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v7 0/3] iio: chemical: atlas-sensor: add DO support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] iio: accel: mma8452: Expose temperature channel
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: accel: mma8452: Expose temperature channel
  • From: Dylan Howey <Dylan.Howey@xxxxxxxxxxxxx>
• [PATCH 0/2] iio: vcnl4000: Export near level property for proximity sensor
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH 1/2] iio: vcnl4000: Export near level property for proximity sensor
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: light: vcnl4000: Add near-level
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v5 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v5 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v5 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v5 4/7] pwm: Add support for Azoteq IQS620A PWM generator
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v5 3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v5 2/7] mfd: Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v5 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• [PATCH v5 0/7] Add support for Azoteq IQS620A/621/622/624/625
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: ak8974: Fix negative raw values in sysfs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v5 6/7] iio: light: al3320a implement devm_add_action_or_reset
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH] iio: trigger: stm32-timer: disable master mode when stopping
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 6/7] iio: light: al3320a implement devm_add_action_or_reset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: trigger: stm32-timer: enable clock when in master mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 5/7] iio: light: al3320a implement suspend support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: afe: rescale: Implement write_raw
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 13/13] iio: imu: inv_mpu6050: temperature only work with accel/gyro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 12/13] iio: imu: inv_mpu6050: use runtime pm with autosuspend
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/13] iio: imu: inv_mpu6050: rewrite power and engine management
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 5/7] iio: light: al3320a implement suspend support
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH 01/13] iio: imu: inv_mpu6050: enable i2c aux mux bypass only once
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 7/7] iio: light: al3320a allow module autoload and polish
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 6/7] iio: light: al3320a implement devm_add_action_or_reset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 5/7] iio: light: al3320a implement suspend support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 5/7] iio: light: al3320a implement suspend support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6] iio: light: add Dyna-Image AL3010 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/7] iio: light: al3320a slightly improve code formatting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/7] dt-bindings: iio: light: add support for Dyna-Image AL3010
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: Add SEMTECH SX9310/9311 sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: dac: ad5770r: Add AD5770R support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: dac: Add docs for AD5770R DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/2] iio: dac: AD5770R: Add support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] iio: accel: adxl372: Update sysfs docs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: accel: adxl372: Add support for FIFO peak mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: accel: adxl372: Set iio_chan BE
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6] iio: light: add Dyna-Image AL3010 driver
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH v3 2/5] staging: iio: adc: ad7192: modify iio_chan_spec array
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH AUTOSEL 5.5 068/542] iio: imu: st_lsm6dsx: check return value from st_lsm6dsx_sensor_set_enable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.5 072/542] dt-bindings: iio: adc: ad7606: Fix wrong maxItems value
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] iio: si1133: read 24 signed integer for measurement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/7] iio: light: add Dyna-Image AL3010 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 063/459] dt-bindings: iio: adc: ad7606: Fix wrong maxItems value
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2] iio: trigger: stm32-timer: enable clock when in master mode
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] iio: trigger: stm32-timer: disable master mode when stopping
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3] iio: trigger: stm32-timer: enable clock when in master mode
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v3 5/5] staging: iio: adc: ad7192: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/5] Documentation: ABI: testing: ad7192: update sysfs docs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] staging: iio: adc: ad7192: removed spi_device_id
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/5] staging: iio: adc: ad7192: fail probe on get_voltage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: trigger: stm32-timer: enable clock when in master mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: stm32-dfsdm: add scale and offset support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add imx8qxp adc driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: trigger: stm32-timer: enable clock when in master mode
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 4/4] iio: adc: stm32-dfsdm: add scale and offset support
  • From: Olivier MOYSAN <olivier.moysan@xxxxxx>
• Re: [PATCH V4] iio: adc: ad7124: Add direct reg access
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 9/9] iio: adis16460: Make use of __adis_initial_startup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 8/9] iio: adis16480: Make use of __adis_initial_startup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 7/9] iio: imu: adis: add support product ID check in adis_initial_startup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/9] iio: imu: adis: Refactor adis_initial_startup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/9] iio: imu: adis: Add self_test_reg variable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/9] iio: imu: adis: add unlocked __adis_initial_startup()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/9] iio: gyro: adis16136: initialize adis_data statically
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/9] iio: imu: adis16400: initialize adis_data statically
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/9] iio: imu: adis16480: initialize adis_data statically
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: si1133: read 24 signed integer for measurement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: trigger: stm32-timer: enable clock when in master mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: check return value from st_lsm6dsx_sensor_set_enable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/5] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 5/5] MAINTAINERS: add entry for hmc425a driver.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/5] iio: amplifiers: hmc425a: Add support for HMC425A attenuator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/5] iio: amplifiers: ad8366: Add write_raw_get_fmt function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/5] iio: core: Handle 'dB' suffix in core
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] Device tree bindings for TI HDC20x0 humidity and temperature sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: mma8452: Expose temperature channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: light: vcnl4000: add control of duty ratio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: light: vcnl4000: add proximity integration time for vcnl4040/4200
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: light: vcnl4000: add enable attributes for vcnl4040/4200
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: stm32-dfsdm: add scale and offset support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5 V2] staging: iio: adc: ad7192: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: remove iio headers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] counter: stm32-timer-cnt: add power management support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: dac: ad5770r: Add AD5770R support
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v3 0/5] SFH: Add Support for AMD Sensor Fusion Hub
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v3 0/5] SFH: Add Support for AMD Sensor Fusion Hub
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] iio: magnetometer: ak8974: Fix negative raw values in sysfs
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v3 0/5] SFH: Add Support for AMD Sensor Fusion Hub
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• [PATCH 5/5] iio: accel: adxl372: Update sysfs docs
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 4/5] iio: accel: adxl372: Add sysfs for g thresholds
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• Re: [PATCH v2 1/6] irq: make irq_domain_reset_irq_data() available even for non-V2 users
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 3/5] iio: accel: adxl372: add sysfs for time registers
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 2/5] iio: accel: adxl372: Set iio_chan BE
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 1/5] iio: accel: adxl372: Add support for FIFO peak mode
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 0/5] iio: accel: adxl372: add peak mode
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• Re: [PATCH v2 1/6] irq: make irq_domain_reset_irq_data() available even for non-V2 users
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/5] SFH: Add Support for AMD Sensor Fusion Hub
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v5 2/2] Device tree bindings for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zalkonnikov <ez@xxxxxxxxxxxxx>
• [PATCH v5 1/2] Driver for TI HDC20x0 humidity and temperature sensors
  • From: Eugene Zalkonnikov <ez@xxxxxxxxxxxxx>
• Re: [PATCH] iio: accel: mma8452: Expose temperature channel
  • From: Dylan Howey <Dylan.Howey@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/5] SFH: Add Support for AMD Sensor Fusion Hub
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• [PATCH v3 1/2] iio: dac: ad5770r: Add AD5770R support
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: iio: dac: Add docs for AD5770R DAC
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v3 0/2] iio: dac: AD5770R: Add support
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v3] iio: Add SEMTECH SX9310/9311 sensor driver
  • From: Daniel Campello <campello@xxxxxxxxxxxx>
• [PATCH 00/13] Rework sensors engines and power management
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 09/13] iio: imu: inv_mpu6050: fix data polling interface
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 04/13] iio: imu: inv_mpu6050: simplify polling magnetometer
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 13/13] iio: imu: inv_mpu6050: temperature only work with accel/gyro
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 12/13] iio: imu: inv_mpu6050: use runtime pm with autosuspend
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 11/13] iio: imu: inv_mpu6050: dynamic sampling rate change
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 10/13] iio: imu: inv_mpu6050: factorize fifo enable/disable
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 08/13] iio: imu: inv_mpu6050: rewrite power and engine management
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 07/13] iio: imu: inv_mpu6050: fix sleep time when turning regulators on
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 06/13] iio: imu: inv_mpu6050: add all signal path resets at init
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 05/13] iio: imu: inv_mpu6050: early init of chip_config for use at setup
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 01/13] iio: imu: inv_mpu6050: enable i2c aux mux bypass only once
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 02/13] iio: imu: inv_mpu6050: delete useless check
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH 03/13] iio: imu: inv_mpu6050: set power on/off only once during all init
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v3 2/5] staging: iio: adc: ad7192: modify iio_chan_spec array
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v3 5/5] staging: iio: adc: ad7192: move out of staging
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v3 4/5] Documentation: ABI: testing: ad7192: update sysfs docs
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v3 1/5] staging: iio: adc: ad7192: fail probe on get_voltage
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 3/5] staging: iio: adc: ad7192: removed spi_device_id
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v3 0/5] iio: adc: ad7192: move out of staging
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• Re: [PATCH v3 0/5] SFH: Add Support for AMD Sensor Fusion Hub
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: fix runtime autosuspend delay when slow polling
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ad7923: Add dt-bindings for AD7928
  • From: Daniel Junho <djunho@xxxxxxxxx>
• [PATCH v3 5/5] SFH: Create HID report to Enable support of AMD sensor fusion Hub (SFH)
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH v3 4/5] SFH: Add debugfs support to AMD Sensor Fusion Hub
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH v3 3/5] SFH: Transport Driver to add support of AMD Sensor Fusion Hub (SFH)
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH v3 2/5] SFH: PCI driver to add support of AMD sensor fusion Hub using HID framework
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH v3 1/5] SFH: Add maintainers and documentation for AMD SFH based on HID framework
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• [PATCH v3 0/5] SFH: Add Support for AMD Sensor Fusion Hub
  • From: Sandeep Singh <Sandeep.Singh@xxxxxxx>
• Re: [PATCH v2] counter: stm32-timer-cnt: add power management support
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v5 7/7] iio: light: al3320a allow module autoload and polish
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v5 6/7] iio: light: al3320a implement devm_add_action_or_reset
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v5 5/7] iio: light: al3320a implement suspend support
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v5 4/7] iio: light: add Dyna-Image AL3010 driver
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v5 3/7] iio: light: al3320a slightly improve code formatting
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v5 2/7] dt-bindings: iio: light: add support for Dyna-Image AL3010
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v5 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v5 0/7] iio: light: AL3010 introduction
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH v2 1/3] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH 5/5] iio: light: vcnl4000: add control of multi pulse
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: light: vcnl4000: add control of duty ratio
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: light: vcnl4000: add proximity integration time for vcnl4040/4200
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: light: vcnl4000: add enable attributes for vcnl4040/4200
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: adc: sd modulator: add vref support
  • From: Olivier MOYSAN <olivier.moysan@xxxxxx>
• Re: [PATCH 2/4] iio: adc: sd modulator: add scale support
  • From: Olivier MOYSAN <olivier.moysan@xxxxxx>
• Re: [PATCH 4/4] iio: adc: stm32-dfsdm: add scale and offset support
  • From: Olivier MOYSAN <olivier.moysan@xxxxxx>
• Re: [PATCH 1/2] iio: dac: ad5770r: Add AD5770R support
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2 2/6] irq/irq_sim: simplify the API
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 1/6] irq: make irq_domain_reset_irq_data() available even for non-V2 users
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 3/6] irq/domain: add a new callback to domain ops
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 4/6] irq/irq_sim: remove irq_domain_remove_sim()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 6/6] irqchip: keystone: use irq_domain_dispose_mappings()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 5/6] irq/domain: provide irq_domain_dispose_mappings() helper
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 0/6] irq/irq_sim: try to improve the API
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] counter: stm32-timer-cnt: remove iio headers
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2] counter: stm32-timer-cnt: add power management support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] iio: adc: Add imx8qxp adc driver support
  • From: haibo.chen@xxxxxxx
• [PATCH V4] iio: adc: ad7124: Add direct reg access
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: [PATCH] RFT: iio: gp2ap002: Replace LUT with math
  • From: Gregor Riepl <onitake@xxxxxxxxx>
• Re: [PATCH] RFT: iio: gp2ap002: Replace LUT with math
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] RFT: iio: gp2ap002: Replace LUT with math
  • From: Gregor Riepl <onitake@xxxxxxxxx>
• Re: [PATCH] RFT: iio: gp2ap002: Replace LUT with math
  • From: Jonathan Bakker <xc-racer2@xxxxxxx>
• [PATCH 2/2] iio: afe: rescale: Implement write_raw
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH 1/2] iio: afe: rescale: Add support for converting scale avail table
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] RFT: iio: gp2ap002: Replace LUT with math
  • From: Jonathan Bakker <xc-racer2@xxxxxxx>
• Re: [PATCH v2 5/5] input: joystick: Add ADC attached joystick driver.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 10/17] iio: cros_ec: Use cros_ec_cmd()
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH] RFT: iio: gp2ap002: Replace LUT with math
  • From: Gregor Riepl <onitake@xxxxxxxxx>
• Re: [PATCH v2] counter: stm32-timer-cnt: add power management support
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2] counter: stm32-timer-cnt: add power management support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: add power management support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Exposing device properties for priximity sensors
  • From: Guido Günther <agx@xxxxxxxxxxx>
• Re: [PATCH] iio: accel: mma8452: Expose temperature channel
  • From: Dylan Howey <Dylan.Howey@xxxxxxxxxxxxx>
• [PATCH v2 5/9] iio: imu: adis: Add self_test_reg variable
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 4/9] iio: imu: adis: add unlocked __adis_initial_startup()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 9/9] iio: adis16460: Make use of __adis_initial_startup
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 6/9] iio: imu: adis: Refactor adis_initial_startup
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 3/9] iio: gyro: adis16136: initialize adis_data statically
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] RFT: iio: gp2ap002: Replace LUT with math
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 8/9] iio: adis16480: Make use of __adis_initial_startup
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 7/9] iio: imu: adis: add support product ID check in adis_initial_startup
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 1/9] iio: imu: adis16480: initialize adis_data statically
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 2/9] iio: imu: adis16400: initialize adis_data statically
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v2 10/17] iio: cros_ec: Use cros_ec_cmd()
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 5/5 V2] staging: iio: adc: ad7192: move out of staging
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v6 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v6 2/3] iio: chemical: atlas-sensor: add DO-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v6 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v6 0/3] iio: chemical: atlas-sensor: add DO support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v2] iio: Add SEMTECH SX9310/9311 sensor driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] RFT: iio: gp2ap002: Replace LUT with math
  • From: Gregor Riepl <onitake@xxxxxxxxx>
• Re: [PATCH v4 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: max1363 etc i2c ADC binding conversion
  • From: jic23@xxxxxxxxxx
• Re: [PATCH v4 2/3] iio: chemical: atlas-sensor: add DO-SM module support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: mma8452: Expose temperature channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: stm32-dfsdm: add scale and offset support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: adc: sd modulator: add vref support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: adc: sd modulator: add scale support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: add power management support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] iio: light: vcnl4000: add control of multi pulse
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: light: vcnl4000: add control of duty ratio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: light: vcnl4000: add proximity integration time for vcnl4040/4200
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: light: vcnl4000: add enable attributes for vcnl4040/4200
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: dac: Add docs for AD5770R DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: dac: ad5770r: Add AD5770R support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: dac: AD5770R: Add support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: vncl4000: Fix early return in vcnl4200_set_power_state
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v5] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] RFT: iio: gp2ap002: Replace LUT with math
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2 v6] iio: light: Add a driver for Sharp GP2AP002x00F
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: dac: ad5770r: Add AD5770R support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iio: vncl4000: Fix early return in vcnl4200_set_power_state
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v2 10/17] iio: cros_ec: Use cros_ec_cmd()
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2] iio: trigger: stm32-timer: enable clock when in master mode
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] iio: si1133: read 24 signed integer for measurement
  • From: Maxime Roussin-Bélanger <maxime.roussinbelanger@xxxxxxxxx>
• Re: [PATCH 1/5] iio: light: vcnl4000: convert to regmap
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: check return value from st_lsm6dsx_sensor_set_enable
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] iio: vncl4000: Fix early return in vcnl4200_set_power_state
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v5 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v5 2/3] iio: chemical: atlas-sensor: add DO-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v5 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v5 0/3] iio: chemical: atlas-sensor: add DO support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
• Re: [PATCH v4 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH v5 4/5] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: ltc2632: expand for ltc2636 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: adc: sd modulator: add vref support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Fix paths in schema $id fields
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v2] iio: Add SEMTECH SX9310/9311 sensor driver
  • From: Daniel Campello <campello@xxxxxxxxxxxx>
• Re: [PATCH v2 10/17] iio: cros_ec: Use cros_ec_cmd()
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• [PATCH v5 3/5] iio: amplifiers: hmc425a: Add support for HMC425A attenuator
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v5 4/5] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v5 5/5] MAINTAINERS: add entry for hmc425a driver.
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v5 2/5] iio: amplifiers: ad8366: Add write_raw_get_fmt function
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v5 1/5] iio: core: Handle 'dB' suffix in core
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PATCH v4 4/7] iio: light: add Dyna-Image AL3010 driver
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v4 3/7] iio: light: al3320a slightly improve code formatting
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v4 3/7] iio: light: al3320a slightly improve code formatting
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 10/17] iio: cros_ec: Use cros_ec_cmd()
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v2 10/17] iio: cros_ec: Use cros_ec_cmd()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/6] dt-bindings: add description for new supported chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: imu: inv_mpu6050: update LPF bandwidth settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/6] iio: imu: inv_mpu6050: add support of ICM20690
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/6] iio: imu: inv_mpu6050: add support of IAM20680
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/6] iio: imu: inv_mpu6050: add support of ICM20609 & ICM20689
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/6] iio: imu: inv_mpu6050: cleanup of/acpi support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/7] iio: light: add Dyna-Image AL3010 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/7] iio: light: al3320a slightly improve code formatting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: modify NPCM reset support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Fix paths in schema $id fields
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: adis: Refactor adis_initial_startup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: vcnl4000: Use a single return when getting IIO_CHAN_INFO_RAW
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: dac: ltc2632: add support for LTC2636 family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: dac: ltc2632: drop some duplicated data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 3/6] iio: imu: inv_mpu6050: add support of IAM20680
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 1/6] iio: imu: inv_mpu6050: cleanup of/acpi support
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 0/6] Add support of similar chips
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 2/6] iio: imu: inv_mpu6050: add support of ICM20609 & ICM20689
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 4/6] iio: imu: inv_mpu6050: add support of ICM20690
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH 4/3] iio: dac: ltc2632: remove some unused defines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: ltc2632: expand for ltc2636 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/3] iio: dac: ltc2632: remove some unused defines
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 6/6] dt-bindings: add description for new supported chips
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH v2 5/6] iio: imu: inv_mpu6050: update LPF bandwidth settings
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH 4/3] iio: dac: ltc2632: remove some unused defines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5 V2] staging: iio: adc: ad7192: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: adis: Refactor adis_initial_startup
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH 5/5 V2] staging: iio: adc: ad7192: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5 V2] Documentation: ABI: testing: ad7192: update sysfs docs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5 V2] staging: iio: adc: ad7192: removed spi_device_id
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/5 V2] staging: iio: adc: ad7192: modify iio_chan_spec array
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5 V2] staging: iio: adc: ad7192: fail probe on get_voltage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/5 V2] iio: adc: ad7192: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: adis: Refactor adis_initial_startup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: dac: Add docs for AD5770R DAC
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 1/2] iio: dac: ad5770r: Add AD5770R support
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 0/2] iio: dac: AD5770R: Add support
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH v4 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v4 2/3] iio: chemical: atlas-sensor: add DO-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v4 0/3] iio: chemical: atlas-sensor: add DO support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v4 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v3 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH] iio: accel: mma8452: Expose temperature channel
  • From: Dylan Howey <Dylan.Howey@xxxxxxxxxxxxx>
• Re: [PATCH v2 10/17] iio: cros_ec: Use cros_ec_cmd()
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 10/17] iio: cros_ec: Use cros_ec_cmd()
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: frequency: Add docs for ADF4360 PLL
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: add power management support
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 4/5 V2] Documentation: ABI: testing: ad7192: update sysfs docs
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 1/5 V2] staging: iio: adc: ad7192: fail probe on get_voltage
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 2/5 V2] staging: iio: adc: ad7192: modify iio_chan_spec array
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 5/5 V2] staging: iio: adc: ad7192: move out of staging
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 3/5 V2] staging: iio: adc: ad7192: removed spi_device_id
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• [PATCH 0/5 V2] iio: adc: ad7192: move out of staging
  • From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: adis: Refactor adis_initial_startup
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v3 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: adis: Refactor adis_initial_startup
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: adis: Refactor adis_initial_startup
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: light: vcnl4000: convert to regmap
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] counter: stm32-timer-cnt: add power management support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 5/5] iio: light: vcnl4000: add control of multi pulse
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH 4/5] iio: light: vcnl4000: add control of duty ratio
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH 3/5] iio: light: vcnl4000: add proximity integration time for vcnl4040/4200
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH 2/5] iio: light: vcnl4000: add enable attributes for vcnl4040/4200
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH 1/5] iio: light: vcnl4000: convert to regmap
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH 0/5] iio: light: vcnl4000: make some settings configurable
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH v3 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v3 2/3] iio: chemical: atlas-sensor: add DO-SM module support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v3 0/3] iio: chemical: atlas-sensor: add DO support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v3 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ad7923: Add dt-bindings for AD7928
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: ad7923: Add dt-bindings for AD7928
  • From: Daniel Junho <djunho@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Fix paths in schema $id fields
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] dt-bindings: Fix paths in schema $id fields
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Temperature support for FXLS8471Q accelerometer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: Temperature support for FXLS8471Q accelerometer
  • From: Dylan Howey <Dylan.Howey@xxxxxxxxxxxxx>
• Re: [PATCH v4 4/7] iio: light: add Dyna-Image AL3010 driver
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>