Re: [PATCH V3 4/4] iio: adc: Update error checks and debug prints

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 27 Apr 2020 18:54:05 +0530
Jishnu Prakash <jprakash@xxxxxxxxxxxxxx> wrote:

> Change pr_err/pr_debug statements to dev_err/dev_dbg for
> increased clarity. Also clean up some return value checks.
> 
> Signed-off-by: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
I'm happy with the whole series.  Just need a devicetree review before
applying. 

Thanks,

Jonathan

> ---
>  drivers/iio/adc/qcom-spmi-adc5.c | 30 +++++++++++++++---------------
>  1 file changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
> index a66eeb7..7e951a0 100644
> --- a/drivers/iio/adc/qcom-spmi-adc5.c
> +++ b/drivers/iio/adc/qcom-spmi-adc5.c
> @@ -249,11 +249,11 @@ static int adc5_read_voltage_data(struct adc5_chip *adc, u16 *data)
>  	*data = (rslt_msb << 8) | rslt_lsb;
>  
>  	if (*data == ADC5_USR_DATA_CHECK) {
> -		pr_err("Invalid data:0x%x\n", *data);
> +		dev_err(adc->dev, "Invalid data:0x%x\n", *data);
>  		return -EINVAL;
>  	}
>  
> -	pr_debug("voltage raw code:0x%x\n", *data);
> +	dev_dbg(adc->dev, "voltage raw code:0x%x\n", *data);
>  
>  	return 0;
>  }
> @@ -304,7 +304,7 @@ static int adc5_configure(struct adc5_chip *adc,
>  
>  	/* Read registers 0x42 through 0x46 */
>  	ret = adc5_read(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf));
> -	if (ret < 0)
> +	if (ret)
>  		return ret;
>  
>  	/* Digital param selection */
> @@ -344,7 +344,7 @@ static int adc7_configure(struct adc5_chip *adc,
>  		return ret;
>  
>  	ret = adc5_read(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf));
> -	if (ret < 0)
> +	if (ret)
>  		return ret;
>  
>  	/* Digital param selection */
> @@ -385,24 +385,24 @@ static int adc5_do_conversion(struct adc5_chip *adc,
>  
>  	ret = adc5_configure(adc, prop);
>  	if (ret) {
> -		pr_err("ADC configure failed with %d\n", ret);
> +		dev_err(adc->dev, "ADC configure failed with %d\n", ret);
>  		goto unlock;
>  	}
>  
>  	if (adc->poll_eoc) {
>  		ret = adc5_poll_wait_eoc(adc);
>  		if (ret < 0) {
> -			pr_err("EOC bit not set\n");
> +			dev_err(adc->dev, "EOC bit not set\n");
>  			goto unlock;
>  		}
>  	} else {
>  		ret = wait_for_completion_timeout(&adc->complete,
>  							ADC5_CONV_TIMEOUT);
>  		if (!ret) {
> -			pr_debug("Did not get completion timeout.\n");
> +			dev_dbg(adc->dev, "Did not get completion timeout.\n");
>  			ret = adc5_poll_wait_eoc(adc);
>  			if (ret < 0) {
> -				pr_err("EOC bit not set\n");
> +				dev_err(adc->dev, "EOC bit not set\n");
>  				goto unlock;
>  			}
>  		}
> @@ -435,7 +435,7 @@ static int adc7_do_conversion(struct adc5_chip *adc,
>  	wait_for_completion_timeout(&adc->complete, ADC7_CONV_TIMEOUT);
>  
>  	ret = adc5_read(adc, ADC5_USR_STATUS1, &status, 1);
> -	if (ret < 0)
> +	if (ret)
>  		goto unlock;
>  
>  	if (status & ADC5_USR_STATUS1_CONV_FAULT) {
> @@ -481,8 +481,8 @@ static int adc7_of_xlate(struct iio_dev *indio_dev,
>  	int i, v_channel;
>  
>  	for (i = 0; i < adc->nchannels; i++) {
> -		v_channel = (adc->chan_props[i].sid << ADC_CHANNEL_OFFSET |
> -			adc->chan_props[i].channel);
> +		v_channel = (adc->chan_props[i].sid << ADC_CHANNEL_OFFSET) |
> +			adc->chan_props[i].channel;
>  		if (v_channel == iiospec->args[0])
>  			return i;
>  	}
> @@ -728,7 +728,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
>  	channel_name = of_get_property(node,
>  				"label", NULL) ? : node->name;
>  	if (!channel_name) {
> -		pr_err("Invalid channel name\n");
> +		dev_err(dev, "Invalid channel name\n");
>  		return -EINVAL;
>  	}
>  	prop->datasheet_name = channel_name;
> @@ -766,12 +766,12 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
>  
>  		ret = adc5_read(adc, ADC5_USR_REVISION1, dig_version,
>  							sizeof(dig_version));
> -		if (ret < 0) {
> +		if (ret) {
>  			dev_err(dev, "Invalid dig version read %d\n", ret);
>  			return ret;
>  		}
>  
> -		pr_debug("dig_ver:minor:%d, major:%d\n", dig_version[0],
> +		dev_dbg(dev, "dig_ver:minor:%d, major:%d\n", dig_version[0],
>  						dig_version[1]);
>  		/* Digital controller >= 5.3 have hw_settle_2 option */
>  		if ((dig_version[0] >= ADC5_HW_SETTLE_DIFF_MINOR &&
> @@ -975,7 +975,7 @@ static int adc5_probe(struct platform_device *pdev)
>  
>  	ret = adc5_get_dt_data(adc, node);
>  	if (ret) {
> -		pr_err("adc get dt data failed\n");
> +		dev_err(dev, "adc get dt data failed\n");
>  		return ret;
>  	}
>  




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux