The following warnings are seen with 'make dt_binding_check':
Documentation/devicetree/bindings/iio/dac/adi,ad5770r.example.dts:29.35-32.27: Warning (unit_address_vs_reg): /example-0/spi/ad5770r@0/channel@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/iio/dac/adi,ad5770r.example.dts:34.35-37.27: Warning (unit_address_vs_reg): /example-0/spi/ad5770r@0/channel@1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/iio/dac/adi,ad5770r.example.dts:39.35-42.27: Warning (unit_address_vs_reg): /example-0/spi/ad5770r@0/channel@2: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/iio/dac/adi,ad5770r.example.dts:44.35-47.27: Warning (unit_address_vs_reg): /example-0/spi/ad5770r@0/channel@3: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/iio/dac/adi,ad5770r.example.dts:49.35-52.27: Warning (unit_address_vs_reg): /example-0/spi/ad5770r@0/channel@4: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/iio/dac/adi,ad5770r.example.dts:54.35-57.27: Warning (unit_address_vs_reg): /example-0/spi/ad5770r@0/channel@5: node has a unit name, but no reg or ranges property
Fix them by removing the unneeded unit addresses.
Signed-off-by: Fabio Estevam <festevam@xxxxxxxxx>
---
.../devicetree/bindings/iio/dac/adi,ad5770r.yaml | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
index f937040477ec..fa86ef52b121 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -151,32 +151,32 @@ examples:
adi,external-resistor;
reset-gpios = <&gpio 22 0>;
- channel@0 {
+ channel0 {
num = <0>;
adi,range-microamp = <(-60000) 300000>;
};
- channel@1 {
+ channel1 {
num = <1>;
adi,range-microamp = <0 140000>;
};
- channel@2 {
+ channel2 {
num = <2>;
adi,range-microamp = <0 55000>;
};
- channel@3 {
+ channel3 {
num = <3>;
adi,range-microamp = <0 45000>;
};
- channel@4 {
+ channel4 {
num = <4>;
adi,range-microamp = <0 45000>;
};
- channel@5 {
+ channel5 {
num = <5>;
adi,range-microamp = <0 45000>;
};
--
2.17.1
