Re: [PATCH 1/4] iio: adc: ad7476: Generate CONVST signal internally

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 11 Mar 2020 10:43:25 +0200
Beniamin Bia <beniamin.bia@xxxxxxxxxx> wrote:

> From: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>
> 
> Compared to the other supported parts, AD7091R are dependent of
> a CONVST signal that initiates the conversion. At this moment, only
> sampling in buffered mode is supported for AD7091R and the only
> option until now was to generate this signal externally using an
> IIO trigger. This patch adds the option of generating it internally,
> more compatible triggers being available in this case.
> 
> Also, it is an intermiate step of adding support more devices.
> 
> Signed-off-by: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>
> Signed-off-by: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
Seems sensible.  Applied to the togreg branch of iio.git and pushed
out as testing for the autobuilders to play with it.

Thanks,

Jonathan

> ---
>  drivers/iio/adc/ad7476.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
> index 76747488044b..32e857dfec9c 100644
> --- a/drivers/iio/adc/ad7476.c
> +++ b/drivers/iio/adc/ad7476.c
> @@ -12,9 +12,11 @@
>  #include <linux/sysfs.h>
>  #include <linux/spi/spi.h>
>  #include <linux/regulator/consumer.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/err.h>
>  #include <linux/module.h>
>  #include <linux/bitops.h>
> +#include <linux/delay.h>
>  
>  #include <linux/iio/iio.h>
>  #include <linux/iio/sysfs.h>
> @@ -34,6 +36,7 @@ struct ad7476_state {
>  	struct spi_device		*spi;
>  	const struct ad7476_chip_info	*chip_info;
>  	struct regulator		*reg;
> +	struct gpio_desc		*convst_gpio;
>  	struct spi_transfer		xfer;
>  	struct spi_message		msg;
>  	/*
> @@ -64,6 +67,17 @@ enum ad7476_supported_device_ids {
>  	ID_ADS7868,
>  };
>  
> +static void ad7091_convst(struct ad7476_state *st)
> +{
> +	if (!st->convst_gpio)
> +		return;
> +
> +	gpiod_set_value(st->convst_gpio, 0);
> +	udelay(1); /* CONVST pulse width: 10 ns min */
> +	gpiod_set_value(st->convst_gpio, 1);
> +	udelay(1); /* Conversion time: 650 ns max */
> +}
> +
>  static irqreturn_t ad7476_trigger_handler(int irq, void  *p)
>  {
>  	struct iio_poll_func *pf = p;
> @@ -71,6 +85,8 @@ static irqreturn_t ad7476_trigger_handler(int irq, void  *p)
>  	struct ad7476_state *st = iio_priv(indio_dev);
>  	int b_sent;
>  
> +	ad7091_convst(st);
> +
>  	b_sent = spi_sync(st->spi, &st->msg);
>  	if (b_sent < 0)
>  		goto done;
> @@ -254,6 +270,12 @@ static int ad7476_probe(struct spi_device *spi)
>  	if (ret)
>  		return ret;
>  
> +	st->convst_gpio = devm_gpiod_get_optional(&spi->dev,
> +						  "adi,conversion-start",
> +						  GPIOD_OUT_LOW);
> +	if (IS_ERR(st->convst_gpio))
> +		return PTR_ERR(st->convst_gpio);
> +
>  	spi_set_drvdata(spi, indio_dev);
>  
>  	st->spi = spi;




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux